Murasaki, my Tezro (Quad 700, 8GB)

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
User avatar
Raion-Fox
Donor
Donor
Posts: 1599
Joined: Thu Jan 30, 2014 5:01 pm
Location: near King George, Virginia
Contact:

Murasaki, my Tezro (Quad 700, 8GB)

Unread postby Raion-Fox » Mon Dec 25, 2017 10:50 pm

So this beautiful Tezro has been with me since shortly before Christmas, courtesy of my man mopar5150. Thank you again John.

IMG_20171226_013349.jpg

IMG_20171226_013336.jpg


Here's the hinv:

Code: Select all

4 700 MHZ IP35 Processors
CPU: MIPS R16000 Processor Chip Revision: 2.1
FPU: MIPS R16010 Floating Point Chip Revision: 2.1
CPU 0 at Module 001c01/Slot 0/Slice A: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0x1c
CPU 1 at Module 001c01/Slot 0/Slice B: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0x1c
CPU 2 at Module 001c01/Slot 0/Slice C: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0x1c
CPU 3 at Module 001c01/Slot 0/Slice D: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0x1c
Main memory size: 6144 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 001c01/Slot 0: 6144 MB (enabled)
  Bank 0 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 1 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 2 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 3 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 4 contains 1024 MB (Premium) DIMMS (disabled)
  Bank 5 contains 1024 MB (Premium) DIMMS (disabled)
  Bank 6 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 7 contains 1024 MB (Premium) DIMMS (enabled)
Integral SCSI controller 2: Version IDE (ATA/ATAPI) IOC4
  CDROM: unit 0 on SCSI controller 2
Integral SCSI controller 0: Version QL12160, low voltage differential
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
Integral SCSI controller 1: Version QL12160, low voltage differential
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
Graphics board: V12
Integral Gigabit Ethernet: tg0, module 001c01, PCI bus 1 slot 4
Iris Audio Processor: version MAD revision 1, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x100a) PCI slot 1
  PCI Adapter ID (vendor 0x104c, device 0xac28) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 3
  PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 4
  PCI Adapter ID (vendor 0x1412, device 0x1724) PCI slot 2
IOC4 firmware revision 83
IOC3/IOC4 external interrupts: 1
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c01/Slot n0: Revision 6.172


And yes I'm aware two DIMMs have been disabled. I will need to crack it open and take a look inside soon - I plan to roll that in with some upgrades in the form of a USB, firewire, and another sound card.

Currently, Murasaki is being run through her paces, compiling GCC for a personal project (and to heat my bedroom!)

For those curious, Murasaki's namesake is Japanese. Her name means "Violet" and I got the original idea from a game called Senran Kagura. Good game, if you like beat 'em ups and don't mind fanservicey cute girls. That blue thing is her bear, "bebe-tan" who is... weird. As fuck.

murasaki.jpg


Unlike the real murasaki this one hasn't gone into an uncontrolled rage or refused to do what I tell it. Good murasaki, good!
:O3x02L: R16000 700MHz 8GB RAM kanna
:Octane: R12000 300MHz SI 896MB RAM yuuka
:Octane2: R12000A 400MHz V6 2.5GB RAM
:Tezro: Quad R16000 700MHz V12 8GB RAM murasaki
:Indy: (Acclaim) R4600 133MHz XL Graphics 32MB RAM
:Indy: (Challenge S) R4600 133MHz (MIPS III Build Server)

I am probably posting from yangxiaolong, HP Z230 with Xeon E3-1230v3, 16GB RAM, GeForce 750ti, and running NetBSD and Windows 8.1 Embedded.
Owner and operator of http://irix.cc

User avatar
Irinikus
Posts: 582
Joined: Wed Apr 27, 2016 4:25 am
Location: Cape Town, South Africa

Re: Murasaki, my Tezro (Quad 700, 8GB)

Unread postby Irinikus » Mon Dec 25, 2017 10:54 pm

Check, I see that you have some disabled RAM in the system, simply type "enableall" in the command monitor in the PROM, then reboot the system and this should enable all of your memory.
Image ................................... Image Image Image Image Image Image Image Image Image
Image ................................... Image Image Image Image Image Image Image Image
Image ... Image
Image ........................ Image
Image ........................ Image Image

Dans34
Donor
Donor
Posts: 35
Joined: Tue Jul 10, 2012 5:25 am
Location: UK (North East)
Contact:

Re: Murasaki, my Tezro (Quad 700, 8GB)

Unread postby Dans34 » Tue Dec 26, 2017 2:01 am

out of interest how loud is such a system when compiling ?
:Octane: R12K/400 Octane, 1024MB, 36GB 15K MAX3036NC , MXI

User avatar
Irinikus
Posts: 582
Joined: Wed Apr 27, 2016 4:25 am
Location: Cape Town, South Africa

Re: Murasaki, my Tezro (Quad 700, 8GB)

Unread postby Irinikus » Tue Dec 26, 2017 6:12 am

I haven't done any compiling on mine, but when they start to heat up and those fans speed up, they do become rather loud. (Louder than an Octane. :D )

They have a whole lot of fans of different sizes within them and this causes acoustic interference which helps to increases the apparent noise level.
Image ................................... Image Image Image Image Image Image Image Image Image
Image ................................... Image Image Image Image Image Image Image Image
Image ... Image
Image ........................ Image
Image ........................ Image Image

User avatar
marshallh
Posts: 43
Joined: Tue Nov 03, 2009 12:53 pm

Re: Murasaki, my Tezro (Quad 700, 8GB)

Unread postby marshallh » Tue Dec 26, 2017 12:39 pm

Tezro has a quite a bit of thermal mass, i.e. it takes at least 10-20minutes of sustained work for it to start increasing, but the fans then do start spooling up faster. They never really slow back down either, since there is so much static consumption :)
All fans running full tilt is a scary sound but one I've not been able to cause thru normal usage.

User avatar
Raion-Fox
Donor
Donor
Posts: 1599
Joined: Thu Jan 30, 2014 5:01 pm
Location: near King George, Virginia
Contact:

Re: Murasaki, my Tezro (Quad 700, 8GB)

Unread postby Raion-Fox » Tue Dec 26, 2017 12:45 pm

Yeah attempts to compile GCC last night at -j3 (so I had some core time for other tasks left over) barely made it go above idle.
:O3x02L: R16000 700MHz 8GB RAM kanna
:Octane: R12000 300MHz SI 896MB RAM yuuka
:Octane2: R12000A 400MHz V6 2.5GB RAM
:Tezro: Quad R16000 700MHz V12 8GB RAM murasaki
:Indy: (Acclaim) R4600 133MHz XL Graphics 32MB RAM
:Indy: (Challenge S) R4600 133MHz (MIPS III Build Server)

I am probably posting from yangxiaolong, HP Z230 with Xeon E3-1230v3, 16GB RAM, GeForce 750ti, and running NetBSD and Windows 8.1 Embedded.
Owner and operator of http://irix.cc

User avatar
Intuition
Posts: 380
Joined: Thu Oct 15, 2009 1:56 pm
Location: Marina Del Rey, CA

Re: Murasaki, my Tezro (Quad 700, 8GB)

Unread postby Intuition » Wed Dec 27, 2017 11:16 am

Niiiiice :)
Image O2 - 300mhz
Image O2 - 400mhz :1600SW: 1600sw
:Octane: 2x400mhz :O200: Origin 200 2x225mhz
aka Casey Christopher


Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 1 guest