kubatyszko wrote:I just noticed that you seem to be missing the 5V aux line - all of the "aux" should be showing up in standby.
What is VERY strange, is that you have all of the 3.3V aux ones, and 5V aux PIMM.
ATX only provides one 5V rail in standby, so if you see 5V in one place but not the other that's odd, and even better, since the 3v3 aux ones are actually converted from 5V - this proves that the 5VSB gets to your fuel just fine.
From this information I can deduce that either one of your DS1780 (monitoring chips) is fried or something on the board makes the monitoring not work - could be short of the 5V just before the monitoring input.
Hmmm, I just noticed this indeed
Code: Select all
001a01-L1>ALERT: Error initializing DS1780 0, no acknowledge
SGI SN1 L1 Controller
Firmware Image B: Rev. 1.10.12, Built 02/01/2002 14:40:22
Do based on the number 0 can we identify which one is likely to be toast?
Or is there another way to double check both(?) DS1780 chips through L1 command or other test?