I am working on hook up to the internet. The Octane was static 192.168.1.122 and my router is 192.168.1.1 without DHCP.
My PC which is 192.168.1.7 is using to monitor the activity on the router.
For wharever reason, the router report PC's address but nothing from Octane although the led on the face plate of router does blinking on the port where the Octane is connecting with.
What am I missing here?
Please advice
Why a static address not shown on the router
Forum rules
Any posts concerning pirated software or offering to buy/sell/trade commercial software are subject to removal.
Any posts concerning pirated software or offering to buy/sell/trade commercial software are subject to removal.
Re: Why a static address not shown on the router
This shows how to do it for pretty much every version of Irix, courtesy of our very good friend Kaya Kupferschmidt:
http://software.majix.org/irix/network-setup.shtml
http://software.majix.org/irix/network-setup.shtml
Project:
Temporarily lost at sea...
Plan:
World domination! Or something...

Temporarily lost at sea...
Plan:
World domination! Or something...


Re: Why a static address not shown on the router
Are you talking about something like a client list on the router? Those depend on the router seeing traffic or communicating with the client station. It might take some time to update or whatever mechanism the router uses to collect the data hasn't happened. Try running some traffic to the internet from your IRIX station, or at least maybe some pings.




























Re: Why a static address not shown on the router
Thanks. yes, the client list on the LAN.
I am using a DD-WRT router. it seems not very stable and from time to time. it just refuse doing anything.
They are okay now.
I am using a DD-WRT router. it seems not very stable and from time to time. it just refuse doing anything.
They are okay now.




Re: Why a static address not shown on the router
Some routers have a config for the range of addresses in use, so maybe 122 is outside that range?
You don't say whether you're troubleshooting lack of internet access - does the Octane see the router when pinging, and can you ping external IPs and addresses?
You don't say whether you're troubleshooting lack of internet access - does the Octane see the router when pinging, and can you ping external IPs and addresses?
Re: Why a static address not shown on the router
Yes. Octane saw the outside of its own box. I was using it posting a message to here but unfortunately not successfully after trying many times.




Re: Why a static address not shown on the router
Are you able to login to the router's control panel? What router is it? dd-wrt is router firmware, a lot of different router manufacturers use it.
Project:
Temporarily lost at sea...
Plan:
World domination! Or something...

Temporarily lost at sea...
Plan:
World domination! Or something...


Re: Why a static address not shown on the router
Is the Octane default gateway set correctly to the router?
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!

-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!





-----------------------------------------------------------------------
Re: Why a static address not shown on the router
It could be any number of things and I for one am not psychic (or somehow able to magically divine whatever the software on your router does).
Tell us what you're doing and what results you are seeing and someone might be able to give an answer.
http://www.catb.org/esr/faqs/smart-questions.html
Tell us what you're doing and what results you are seeing and someone might be able to give an answer.
http://www.catb.org/esr/faqs/smart-questions.html
Code: Select all
___(o)=
\____)
- jan-jaap
- Donor
- Posts: 5021
- Joined: Thu Jun 17, 2004 11:35 am
- Location: Wijchen, The Netherlands
- Contact:
Re: Why a static address not shown on the router
Dalplex wrote:Thanks. yes, the client list on the LAN.
I am using a DD-WRT router. it seems not very stable and from time to time. it just refuse doing anything.
They are okay now.
My pfSense router does more or less the same thing.
The trick here is that the router only allows 'registered' clients on the LAN and firewalls everything else.
If a client uses DHCP, the router assigns it an IP address and allows it to communicate.
If a client uses a static IP address, it's not in the router database of registered clients and it's blocked.
A static ARP entry might help.
























To accentuate the special identity of the IRIS 4D/70, Silicon Graphics' designers selected a new color palette. The machine's coating blends dark grey, raspberry and beige colors into a pleasing harmony. (IRIS 4D/70 Superworkstation Technical Report)
Return to “Getting Started, Documentation, Tips & Tricks”
Who is online
Users browsing this forum: No registered users and 1 guest