They're coming to take me away hehe! For compiling GCC

IRIX/Nekoware development, porting and related topics.
Forum rules
Any posts concerning pirated software or offering to buy/sell/trade commercial software are subject to removal.
User avatar
praetor242
Posts: 207
Joined: Thu Feb 23, 2017 5:41 pm
Location: Arlington, TX

They're coming to take me away hehe! For compiling GCC

Unread postby praetor242 » Thu May 04, 2017 4:04 pm

I am compiling GCC 4.7.4 on my O2...and.....I need a beefy Origin. This is my second go because after 689 minutes it crapped out because of a f**king leading / in a path on my ./configure command. So...here we go again. And my other O2 still isn't happy and I am sooooo bored and hopped up on RedBull :P
Attachments
rainbow_dash_in_the_padded_room_by_nxzc88-d9sdc02.png
Last edited by foetz on Fri May 05, 2017 11:25 am, edited 1 time in total.
Reason: please attach large images
Image - trajan - R5000 180Mhz - 128 MB RAM - 147GB HDD
Image - hadrian - R5000 180Mhz - 128 MB RAM - 76 GB HDD

User avatar
uunix
Donor
Donor
Posts: 1795
Joined: Sun Mar 27, 2011 12:48 pm
Location: Stourbridge / England / UK

Re: They're coming to take me away hehe! For compiling GCC

Unread postby uunix » Thu May 04, 2017 4:08 pm

Get some folks round to watch the text scrolling down the screen.. tell them you are working for NASA on a special project and to bring some beer..
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:Octane2: :O2: :Indigo: :Indy:
-----------------------------------------------------------------------

User avatar
praetor242
Posts: 207
Joined: Thu Feb 23, 2017 5:41 pm
Location: Arlington, TX

Re: They're coming to take me away hehe! For compiling GCC

Unread postby praetor242 » Thu May 04, 2017 4:19 pm

I'm doin' important h4x0r stuffs! Bring beer!
Image - trajan - R5000 180Mhz - 128 MB RAM - 147GB HDD
Image - hadrian - R5000 180Mhz - 128 MB RAM - 76 GB HDD

User avatar
uunix
Donor
Donor
Posts: 1795
Joined: Sun Mar 27, 2011 12:48 pm
Location: Stourbridge / England / UK

Re: They're coming to take me away hehe! For compiling GCC

Unread postby uunix » Thu May 04, 2017 4:21 pm

praetor242 wrote:I'm doin' important h4x0r stuffs! Bring beer!

Does it look as impressive as compiling gcc?
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:Octane2: :O2: :Indigo: :Indy:
-----------------------------------------------------------------------

User avatar
Raion-Fox
Donor
Donor
Posts: 1331
Joined: Thu Jan 30, 2014 5:01 pm
Location: near King George, Virginia
Contact:

Re: They're coming to take me away hehe! For compiling GCC

Unread postby Raion-Fox » Thu May 04, 2017 4:32 pm

Apparently if you can post brony memes then you're doing pretty good!
:O3x02L: R16000 700MHz 8GB RAM kanna
:Octane: R12000 300MHz SI 896MB RAM yuuka
:Octane2: R12000A 400MHz V6 2.5GB RAM
:Indy: (Acclaim) R4600 133MHz XL Graphics 32MB RAM
:Indy: (Challenge S) R4600 133MHz (MIPS III Build Server)
Thinkpad W530 i7 3940XM 3GHz, 32GB, K1000M Windows 8.1 Embedded rin
Thinkpad R40 Pentium M 1.5GHz 2GB RAM kasha

User avatar
praetor242
Posts: 207
Joined: Thu Feb 23, 2017 5:41 pm
Location: Arlington, TX

Re: They're coming to take me away hehe! For compiling GCC

Unread postby praetor242 » Thu May 04, 2017 4:34 pm

Raion-Fox wrote:Apparently if you can post brony memes then you're doing pretty good!


Well it's only been 6 hours....we'll see what my mental state is like after another 11 hours :p


The nekochan wiki article on compiling GCC said it took the author 2 hours on a 16 processor Origin 3400....so I can't imagine how long this will take on a single 180Mhz O2 :p
Last edited by foetz on Fri May 05, 2017 11:24 am, edited 1 time in total.
Reason: merged
Image - trajan - R5000 180Mhz - 128 MB RAM - 147GB HDD
Image - hadrian - R5000 180Mhz - 128 MB RAM - 76 GB HDD

User avatar
Raion-Fox
Donor
Donor
Posts: 1331
Joined: Thu Jan 30, 2014 5:01 pm
Location: near King George, Virginia
Contact:

Re: They're coming to take me away hehe! For compiling GCC

Unread postby Raion-Fox » Thu May 04, 2017 5:00 pm

As far as compilation goes you're probably looking at at least a day. Compiling GCC on my old Tezro took around 12.
:O3x02L: R16000 700MHz 8GB RAM kanna
:Octane: R12000 300MHz SI 896MB RAM yuuka
:Octane2: R12000A 400MHz V6 2.5GB RAM
:Indy: (Acclaim) R4600 133MHz XL Graphics 32MB RAM
:Indy: (Challenge S) R4600 133MHz (MIPS III Build Server)
Thinkpad W530 i7 3940XM 3GHz, 32GB, K1000M Windows 8.1 Embedded rin
Thinkpad R40 Pentium M 1.5GHz 2GB RAM kasha

User avatar
praetor242
Posts: 207
Joined: Thu Feb 23, 2017 5:41 pm
Location: Arlington, TX

Re: They're coming to take me away hehe! For compiling GCC

Unread postby praetor242 » Thu May 04, 2017 8:10 pm

Oh yeah. It's going to take a long time, but I think it will be worth it.

uunix wrote:Does it look as impressive as compiling gcc?


It's UNIX.....I know this! In my senior year in High School, I had to do a presentation for a class, and I didn't bother preparing it. I took trusty Indigo, loaded up fsn and asked "Does anybody remember Jurassic Park?" Class goes fucking wild like "It's UNIX". Yes...yes it is. Ended up getting an A+ on the presentation with absolutely zero work. If it were just a retarded PeeCee, I doubt I could have pulled it off. But it was an SGI!

Hindsight 20/20, I could have just compiled GCC and been like "I'm hacking the MATRIX!" and gotten my diploma just for that alone....long as it's on an SGI...anything is possible :p How's that for the "song and dance machine"?
Last edited by foetz on Fri May 05, 2017 11:23 am, edited 1 time in total.
Reason: please combine replies to multiple persons in one post
Image - trajan - R5000 180Mhz - 128 MB RAM - 147GB HDD
Image - hadrian - R5000 180Mhz - 128 MB RAM - 76 GB HDD

User avatar
Raion-Fox
Donor
Donor
Posts: 1331
Joined: Thu Jan 30, 2014 5:01 pm
Location: near King George, Virginia
Contact:

Re: They're coming to take me away hehe! For compiling GCC

Unread postby Raion-Fox » Fri May 05, 2017 2:34 pm

Lemme guess, it is still going, isn't it.
:O3x02L: R16000 700MHz 8GB RAM kanna
:Octane: R12000 300MHz SI 896MB RAM yuuka
:Octane2: R12000A 400MHz V6 2.5GB RAM
:Indy: (Acclaim) R4600 133MHz XL Graphics 32MB RAM
:Indy: (Challenge S) R4600 133MHz (MIPS III Build Server)
Thinkpad W530 i7 3940XM 3GHz, 32GB, K1000M Windows 8.1 Embedded rin
Thinkpad R40 Pentium M 1.5GHz 2GB RAM kasha

User avatar
praetor242
Posts: 207
Joined: Thu Feb 23, 2017 5:41 pm
Location: Arlington, TX

Re: They're coming to take me away hehe! For compiling GCC

Unread postby praetor242 » Sat May 06, 2017 11:13 am

Yup. It's still going :p And going and going and going. But it will be worth it when I get pidgin working with the twitter plugin and tweet "Tweeting from my SGI machine!"
Image - trajan - R5000 180Mhz - 128 MB RAM - 147GB HDD
Image - hadrian - R5000 180Mhz - 128 MB RAM - 76 GB HDD

User avatar
Raion-Fox
Donor
Donor
Posts: 1331
Joined: Thu Jan 30, 2014 5:01 pm
Location: near King George, Virginia
Contact:

Re: They're coming to take me away hehe! For compiling GCC

Unread postby Raion-Fox » Sat May 06, 2017 11:26 am

That's true!
:O3x02L: R16000 700MHz 8GB RAM kanna
:Octane: R12000 300MHz SI 896MB RAM yuuka
:Octane2: R12000A 400MHz V6 2.5GB RAM
:Indy: (Acclaim) R4600 133MHz XL Graphics 32MB RAM
:Indy: (Challenge S) R4600 133MHz (MIPS III Build Server)
Thinkpad W530 i7 3940XM 3GHz, 32GB, K1000M Windows 8.1 Embedded rin
Thinkpad R40 Pentium M 1.5GHz 2GB RAM kasha

User avatar
praetor242
Posts: 207
Joined: Thu Feb 23, 2017 5:41 pm
Location: Arlington, TX

Re: They're coming to take me away hehe! For compiling GCC

Unread postby praetor242 » Sat May 06, 2017 11:53 am

If it weren't for a web browser, I could easily make IRIX my daily driver, which I would love. When I had my Indigo umpteen years ago, it was my daily driver for a quite a while.
Image - trajan - R5000 180Mhz - 128 MB RAM - 147GB HDD
Image - hadrian - R5000 180Mhz - 128 MB RAM - 76 GB HDD

User avatar
Raion-Fox
Donor
Donor
Posts: 1331
Joined: Thu Jan 30, 2014 5:01 pm
Location: near King George, Virginia
Contact:

Re: They're coming to take me away hehe! For compiling GCC

Unread postby Raion-Fox » Sat May 06, 2017 11:59 am

I've gotten increasingly disgruntled with Firefox and fuck Webkit, so eventually I imagine I'll eventually fund development of an alternative web browser engine. If anyone here had the expertise to take the last non brain damaged version of Gecko and build an fltk or fox toolkit browser around it, I'd be all over it. For a JS engine we could use the Firefox version but strip down and integrate no script into the system so that we could only activate it when it's absolutely necessary
:O3x02L: R16000 700MHz 8GB RAM kanna
:Octane: R12000 300MHz SI 896MB RAM yuuka
:Octane2: R12000A 400MHz V6 2.5GB RAM
:Indy: (Acclaim) R4600 133MHz XL Graphics 32MB RAM
:Indy: (Challenge S) R4600 133MHz (MIPS III Build Server)
Thinkpad W530 i7 3940XM 3GHz, 32GB, K1000M Windows 8.1 Embedded rin
Thinkpad R40 Pentium M 1.5GHz 2GB RAM kasha

User avatar
praetor242
Posts: 207
Joined: Thu Feb 23, 2017 5:41 pm
Location: Arlington, TX

Re: They're coming to take me away hehe! For compiling GCC

Unread postby praetor242 » Sat May 06, 2017 12:24 pm

I wonder how hard it would be to port the Haiku web engine to IRIX. I _think_ it's its own little thing, and it's speedy as all get out.
Image - trajan - R5000 180Mhz - 128 MB RAM - 147GB HDD
Image - hadrian - R5000 180Mhz - 128 MB RAM - 76 GB HDD

User avatar
commodorejohn
Posts: 652
Joined: Tue Oct 02, 2012 1:22 pm
Contact:

Re: They're coming to take me away hehe! For compiling GCC

Unread postby commodorejohn » Sat May 06, 2017 1:05 pm

I'm still using Firefox by way of Pale Moon, but even that can only strip out so much of the bullshit. I'd love for there to be a decent alternative browser out there - seems like all the alternatives these days are either Chrome wannabes or so bare-bones they don't include proper adblocking or JS whitelist features.
Computers: Amiga 1200, DEC VAXStation 4000/60, DEC MicroPDP-11/73
Synthesizers: Roland JX-10/SH-09/HS-80/MT-32/D-50, Yamaha DX7-II/V50/TX7/TG33/FB-01, Korg MS-20 Mini/ARP Odyssey/DW-8000/M1, Ensoniq SQ-80, E-mu Emax HD/Proteus-2, Casio CZ-5000, Moog Satellite, Sequential Circuits Prophet-600


Return to “SGI: Development”

Who is online

Users browsing this forum: No registered users and 2 guests