Fuel: 700 MHz, 4GB RAM, V12, GigE, 2xU320, DM6

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
User avatar
smj
Donor
Donor
Posts: 1661
Joined: Mon Nov 12, 2007 7:54 pm
Location: Berkeley, CA, USA, NA, Earth, Sol
Contact:

Re: Fuel: 700 MHz, 4GB RAM, V12, GigE, 2xU320, DM6

Unread postby smj » Mon May 02, 2016 4:28 pm

BTW: The PSU on this Fuel is no longer powering up. Not sure if I'll replace it or try the ATX hack yet, but stay tuned. (Don't literally stay tuned, it might be another five years...)
Then? :IRIS3130: ... Now? :O3x02L: :A3504L:- :A3502L: :1600SW:+MLA :Fuel: :Octane2: :Octane: :Indigo2IMP: :Indy: ... Other: DEC :BA213: :BA123: Sun, DG AViiON, NeXT :Cube:

mopar5150
Posts: 548
Joined: Tue Apr 24, 2012 6:02 pm
Location: Palm Springs, CA
Contact:

Re: Fuel: 700 MHz, 4GB RAM, V12, GigE, 2xU320, DM6

Unread postby mopar5150 » Wed May 04, 2016 11:42 am

I have a Fuel PSU I can give you cheap if you don't go the ATX hack route. PM me your info.
If the thing isn't on fire it's a software problem.

:Tezro: :O3x0: :A350:

User avatar
Trippynet
Donor
Donor
Posts: 785
Joined: Thu Aug 15, 2013 6:22 am
Location: Aberdeen, Scotland, UK

Re: Fuel: 700 MHz, 4GB RAM, V12, GigE, 2xU320, DM6

Unread postby Trippynet » Wed May 04, 2016 11:52 am

mopar5150 wrote:I have a Fuel PSU I can give you cheap if you don't go the ATX hack route. PM me your info.


Are there any spares you don't have? :D
Systems in use:
:Indigo2IMP: - Nitrogen: R10000 195MHz CPU, 384MB RAM, SolidIMPACT Graphics, 36GB 15k HDD & 300GB 10k HDD, 100Mb/s NIC, New/quiet fans, IRIX 6.5.22
:Fuel: - Lithium: R14000 600MHz CPU, 4GB RAM, V10 Graphics, 72GB 15k HDD & 300GB 10k HDD, 1Gb/s NIC, New/quiet fans, IRIX 6.5.30
Other system in storage: :O2: R5000 200MHz, 224MB RAM, 72GB 15k HDD, PSU fan mod, IRIX 6.5.30

mopar5150
Posts: 548
Joined: Tue Apr 24, 2012 6:02 pm
Location: Palm Springs, CA
Contact:

Re: Fuel: 700 MHz, 4GB RAM, V12, GigE, 2xU320, DM6

Unread postby mopar5150 » Wed May 04, 2016 1:17 pm

Trippynet wrote:
mopar5150 wrote:I have a Fuel PSU I can give you cheap if you don't go the ATX hack route. PM me your info.


Are there any spares you don't have? :D


I tend to get this stuff by the pallet so I wind up with a little of everything. :D
If the thing isn't on fire it's a software problem.

:Tezro: :O3x0: :A350:

User avatar
ClassicHasClass
Donor
Donor
Posts: 2076
Joined: Wed Jul 25, 2012 7:12 pm
Location: Sunny So Cal
Contact:

Re: Fuel: 700 MHz, 4GB RAM, V12, GigE, 2xU320, DM6

Unread postby ClassicHasClass » Thu May 05, 2016 3:51 am

Trippynet wrote:
mopar5150 wrote:I have a Fuel PSU I can give you cheap if you don't go the ATX hack route. PM me your info.


Are there any spares you don't have? :D


You should see his house.

(*has seen his house :D )
smit happens.

:Fuel: bigred, 900MHz R16K, 4GB RAM, V12 DCD, 6.5.30
:Indy: indy, 150MHz R4400SC, 256MB RAM, XL24, 6.5.10
:Indigo2IMP: purplehaze, 175MHz R10000, Solid IMPACT
probably posted from Image bruce, Quad 2.5GHz PowerPC 970MP, 16GB RAM, Mac OS X 10.4.11
plus IBM POWER6 p520 * Apple Network Server 500 * RDI PrecisionBook * BeBox * Solbourne S3000 * Commodore 128 * many more...

User avatar
smj
Donor
Donor
Posts: 1661
Joined: Mon Nov 12, 2007 7:54 pm
Location: Berkeley, CA, USA, NA, Earth, Sol
Contact:

Re: Fuel: 700 MHz, 4GB RAM, V12, GigE, 2xU320, DM6

Unread postby smj » Sat Jul 09, 2016 2:26 pm

Thanks again to mopar5150 for the replacement PSU.

The thin client on my desk couldn't access the serial port (nice job, Wyse/SuSE). As it was on the desk right above the Fuel, I couldn't just drag in some other device... I finally sorted it out by pulling the flash DOM and booting Debian off of a thumb drive.

So here's what was in the L1 logs from previous attempts to powet up:
L1 wrote:05/27/16 01:14:12 L1 booting 1.44.4
05/27/16 01:14:13 USB0: waiting on open
05/27/16 01:14:34 power up (PANEL)
05/27/16 01:14:40 reset again MIPS
05/27/16 01:14:46 SRAM low fault limit reached @ 1.053V.
05/27/16 01:15:16 power down (ENVIRONMENTAL)
05/27/16 01:15:26 NMI (PANEL)
05/27/16 01:15:30 power up (PANEL)
05/27/16 01:15:36 reset again MIPS
05/27/16 01:15:42 SRAM low fault limit reached @ 1.027V.
05/27/16 01:16:12 power down (ENVIRONMENTAL)
05/27/16 18:47:50 power up (PANEL)
05/27/16 18:47:56 reset again MIPS
05/27/16 18:48:01 SRAM low fault limit reached @ 1.053V.
05/27/16 18:48:31 power down (ENVIRONMENTAL)


Not promising. Here's what I got when I tried to power it up from the L1:
L1 wrote:001a01-L1>power up
001a01 ATTN: PIMM 1.5V low fault limit reached @ 1.015V.
001a01 ATTN: brick auto power down in 30 seconds
...
001a01 ATTN: brick auto power down in 5 seconds
001a01 ATTN: brick is powering down now!
001a01-L1>


At (hopefully) small risk of doing further damage I turned off environmental monitoring and powered up again, so I'd have a little more time to get actual voltage readings out of the L1.

Code: Select all

...
Description    State       Warning Limits     Fault Limits       Current
-------------- ----------  -----------------  -----------------  -------
           12V   Disabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.063
        12V IO   Disabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.125
            5V   Disabled  10%   4.50/  5.50  20%   4.00/  6.00    5.070
          3.3V   Disabled  10%   2.97/  3.63  20%   2.64/  3.96    3.337
          2.5V   Disabled  10%   2.25/  2.75  20%   2.00/  3.00    2.470
          1.5V   Disabled  10%   1.35/  1.65  20%   1.20/  1.80    1.466
        5V AUX   Disabled  10%   4.50/  5.50  20%   4.00/  6.00    5.096
      3.3V AUX   Disabled  10%   2.97/  3.63  20%   2.64/  3.96    3.285
 PIMM 12V BIAS   Disabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.125
          SRAM   Disabled  10%   2.25/  2.75  20%   2.00/  3.00    0.962     <== !!!
          VCPU   Disabled  10%   1.13/  1.38  20%   1.00/  1.50    1.255
     PIMM 1.5V   Disabled  10%   1.35/  1.65  20%   1.20/  1.80    0.818     <== !!!
 PIMM 3.3V AUX   Disabled  10%   2.97/  3.63  20%   2.64/  3.96    3.285
   PIMM 5V AUX   Disabled  10%   4.50/  5.50  20%   4.00/  6.00    5.096
  XIO 12V BIAS   Disabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.000
        XIO 5V   Disabled  10%   4.50/  5.50  20%   4.00/  6.00    5.070
      XIO 2.5V   Disabled  10%   2.25/  2.75  20%   2.00/  3.00    2.470
  XIO 3.3V AUX   Disabled  10%   2.97/  3.63  20%   2.64/  3.96    3.302
...


So, not promising. Time to start searching the forums and 'Net for these errors. Maybe take enough things out of the Fuel for a close visual inspection, and reseat a few things. And time to post this, since this Live Debian instance has already locked up on me once, losing a post...
Then? :IRIS3130: ... Now? :O3x02L: :A3504L:- :A3502L: :1600SW:+MLA :Fuel: :Octane2: :Octane: :Indigo2IMP: :Indy: ... Other: DEC :BA213: :BA123: Sun, DG AViiON, NeXT :Cube:

mopar5150
Posts: 548
Joined: Tue Apr 24, 2012 6:02 pm
Location: Palm Springs, CA
Contact:

Re: Fuel: 700 MHz, 4GB RAM, V12, GigE, 2xU320, DM6

Unread postby mopar5150 » Mon Jul 11, 2016 6:59 am

Start by pulling out all of the PCI cards and then disconnect the HDD and power it up again. I can send you a 600mhz MB+CPU to test with if you need it.

As dumb as it sounds, check for screws rolling around in the case or under the PIMM module. I have found this in many machines where I had random PSU and memory issues.
If the thing isn't on fire it's a software problem.

:Tezro: :O3x0: :A350:

User avatar
uunix
Donor
Donor
Posts: 1795
Joined: Sun Mar 27, 2011 12:48 pm
Location: Stourbridge / England / UK

Re: Fuel: 700 MHz, 4GB RAM, V12, GigE, 2xU320, DM6

Unread postby uunix » Fri Jul 14, 2017 1:40 pm

Did we get a solution on this?

I came back tonight and for the first time in a week powered on the FUEL.. only to be greeted with it powering off after 30 seconds (I now know).

Checked the console out which would have given me a red hearing as I'd be pulling all sorts of things..

Code: Select all

IP35 PROM SGI Version 6.210  built 02:33:51 PM Aug 26, 2004
Running in DDR mode
Testing/Initializing memory ...........


So connected to the L1

Code: Select all

001a01 ATTN: XIO 3.3V AUX low fault limit reached @  0.000V.

001a01 ATTN: brick auto power down in 30 seconds

001a01 ATTN: brick auto power down in 25 seconds

001a01 ATTN: brick auto power down in 20 seconds

001a01 ATTN: brick auto power down in 15 seconds

001a01 ATTN: brick auto power down in 10 seconds

001a01 ATTN: brick auto power down in 5 seconds

001a01 ATTN: brick is powering down now!


Pulled cards, disconnected drives, changed the power plug it was plugged into.. no joy!

AND THIS IS WHAT PISSES ME OFF!!!

I don't turn it on for a few days, and then they cry like a damn baby and blow themselves up!!! It's not been moved, there are no screws floating around , there has been no power spikes.. IT's JUST HAVING A BITCH FIT BECAUSE IT FELT LEFT OUT!!! FSCKER!!!

This machine has been flawless, each day I turn it on.. and I know it's going to turn on!
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:Octane2: :O2: :Indigo: :Indy:
-----------------------------------------------------------------------

ajw99uk
Posts: 255
Joined: Tue Apr 19, 2011 4:59 am
Location: Yorkshire, UK

Re: Fuel: 700 MHz, 4GB RAM, V12, GigE, 2xU320, DM6

Unread postby ajw99uk » Sat Jul 15, 2017 12:59 pm

Mine's not been on for weeks, maybe months - this does not bode well ... though maybe the prospect of pseudo-DCD when I come to experiment with the Dualhead2Go will be incentive enough.
It has red-lighted before but recovered after a console log-in. <fingers crossed >
Fuel; Indigo2; Inspiron 531 WinXP/Win10/debian-buster; Inspiron 4100 debian-buster; RiscPC Kinetic/448MB/RISCOS4.39; RPi B/256MB RISCOS5.23; RPi2 Raspbian-buster; A5000/33MHz/FPA11/8MB/RISCOS3.11; A540/25MHz/FPA10/16MB/RISCOS3.11 or RISCiX1.21


Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 1 guest