WTT: Onyx2 (The Netherlands)

Have some gear for sale? Post it here!
Forum rules
Any posts concerning pirated software or offering to buy/sell/trade commercial software are subject to removal.
User avatar
Skysearcher
Posts: 45
Joined: Mon Apr 02, 2012 2:19 pm

WTT: Onyx2 (The Netherlands)

Unread postby Skysearcher » Fri Apr 27, 2012 10:07 am

Hi all,

I want to trade my Onyx2 for a more compact and less bulky model, the Onyx2 is a great machine,
but way to heavy for my bad back and too big for my house.

It is installed with a fresh copy of Irix 6.5.30 and a fresh copy of Maya 6.5. This Onyx2 has no skins.
Three HDD of 9,2 gb each. One disk with 6.5.30, one with 6.5.2 (and stuff from NOS/NOB) and one
empty drive.

Hinv -v

Code: Select all

4 250 MHZ IP27 Processors
CPU: MIPS R10000 Processor Chip Revision: 3.4
FPU: MIPS R10010 Floating Point Chip Revision: 3.4
CPU 0 at Module 1/Slot 2/Slice A: 250 Mhz MIPS R10000 Processor Chip (enabled)
  Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz  Tap 0x9
CPU 1 at Module 1/Slot 2/Slice B: 250 Mhz MIPS R10000 Processor Chip (enabled)
  Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz  Tap 0x9
CPU 2 at Module 1/Slot 1/Slice A: 250 Mhz MIPS R10000 Processor Chip (enabled)
  Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz  Tap 0x9
CPU 3 at Module 1/Slot 1/Slice B: 250 Mhz MIPS R10000 Processor Chip (enabled)
  Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz  Tap 0x9
Main memory size: 512 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 1/Slot 82: 256 MB (enabled)
  Bank 0 contains 256 MB (Standard) DIMMS (enabled)
Memory at Module 1/Slot 81: 256 MB (enabled)
  Bank 0 contains 256 MB (Standard) DIMMS (enabled)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
  Disk drive: unit 3 on SCSI controller 0 (unit 3)
  CDROM: unit 6 on SCSI controller 0
IOC3/IOC4 serial port: tty5
IOC3/IOC4 serial port: tty6
IOC3/IOC4 serial port: tty7
IOC3/IOC4 serial port: tty8
IOC3/IOC4 serial port: tty9
IOC3/IOC4 serial port: tty10
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3 parallel port: plp1
Graphics board: InfiniteReality2E
Fast Ethernet: ef1, version 1, module 1, slot io3, pci 0
Fast Ethernet: ef2, version 1, module 1, slot io3, pci 1
Fast Ethernet: ef3, version 1, module 1, slot io3, pci 2
Fast Ethernet: ef4, version 1, module 1, slot io3, pci 3
Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2
Iris Audio Processor: version RAD revision 7.0, number 1
Origin BASEIO board, module 1 slot 1: Revision 4
  PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 0
  PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 2
Origin MENET board, module 1 slot 3: Revision 3
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 0
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 3
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 6
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 7
IOC3/IOC4 external interrupts: 1
HUB in Module 1/Slot 2: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 1/Slot 1: Revision 5 Speed 100.00 Mhz (enabled)
IP27prom in Module 1/Slot n2: Revision 6.156
IP27prom in Module 1/Slot n1: Revision 6.156
IO6prom on Global Master Baseio in Module 1/Slot io2: Revision 6.156


/usr/gfx/gfxinfo/

Code: Select all

    Graphics board 0 is "KONAL" graphics.
            Managed (":0.0") 1280x1024
            Display has 2 channels
            4 GEs (of 4), occmask = 0x0f
            4MB external BEF ram, 32bit path
            1 RM9 board (of 1) 1/0/0/0
            Texture Memory: 64MB/-/-/-
            Medium pixel depth
            32K cmap
            GVO option detected
            Channel 0:
             Origin = (0,0)
             Video Output: 1280 pixels, 1024 lines, 72.00Hz (1280x1024_72.vfo)




uname -aR

Code: Select all

IRIX64 IRIS 6.5 6.5.30f 07202013 IP27


Image

Image

PM me for offer.
:1600SW: :Indigo2: :O2: :O2: :O2+: :Indigo: :Indigo: previously owned ---> :Onyx2: other stuff : Commodore Amiga A500, Commodore Vic-20 (2x)

User avatar
tesla
Posts: 255
Joined: Fri Feb 29, 2008 4:17 am
Location: Scania, Sweden

Re: WTT: Onyx2 (The Netherlands)

Unread postby tesla » Sat Apr 28, 2012 12:27 am

PM sent.
If I can't fix it I can fix it so it can't be fixed.
:O2000: :O2000:+MXE/IO6G :Onyx:[RE2] :Fuel: :O200: :Octane:x3 :Octane2: :O2:x2 :1600SW:x3 :Indigo2IMP:x2 :Indigo2:x2 :Indigo: :Indy:x5 :320:x2, 2xSparcStation 20 and a horde of PC's

SGINERD
Posts: 75
Joined: Mon Aug 07, 2006 7:02 am

Re: WTT: Onyx2 (The Netherlands)

Unread postby SGINERD » Sat Apr 28, 2012 6:12 am

Email sent.
:Octane2: :Fuel: :Indigo2IMP: :Indigo2IMP: :Indigo2IMP: :Indigo2: :Indigo2: :Indigo2: :Indigo: :O2: :O2: :O2: :O2: :O2: :Indy: :320: :320: :320: :540: :1600SW: :1600SW: :1600SW:

User avatar
Skysearcher
Posts: 45
Joined: Mon Apr 02, 2012 2:19 pm

Re: WTT: Onyx2 (The Netherlands)

Unread postby Skysearcher » Mon Apr 30, 2012 11:29 am

Succesfully trade with SGINERD ;-)
:1600SW: :Indigo2: :O2: :O2: :O2+: :Indigo: :Indigo: previously owned ---> :Onyx2: other stuff : Commodore Amiga A500, Commodore Vic-20 (2x)

User avatar
jan-jaap
Posts: 4183
Joined: Thu Jun 17, 2004 11:35 am
Location: Wijchen, The Netherlands

Re: WTT: Onyx2 (The Netherlands)

Unread postby jan-jaap » Mon Apr 30, 2012 1:05 pm

Skysearcher wrote:Succesfully trade with SGINERD ;-)

I thought SGINERD unloaded his enire collection recently? :?

Whatever, hope you traded for something nice :)
Now this is a deep dark secret, so everybody keep it quiet :)
It turns out that when reset, the WD33C93 defaults to a SCSI ID of 0, and it was simpler to leave it that way... -- Dave Olson, in comp.sys.sgi

Currently in commercial service: Image :Onyx2:(2x) :O3x02L:
In the museum: almost every MIPS/IRIX system.
Wanted: GM1 board for Professional Series GT graphics (030-0076-003, 030-0076-004)

hamei
Posts: 10186
Joined: Tue Feb 24, 2004 4:10 pm
Location: over the rainbow

Re: WTT: Onyx2 (The Netherlands)

Unread postby hamei » Mon Apr 30, 2012 10:25 pm

jan-jaap wrote:I thought SGINERD unloaded his enire collection recently? :?

SGINERD is chipping :P

SGINERD
Posts: 75
Joined: Mon Aug 07, 2006 7:02 am

Re: WTT: Onyx2 (The Netherlands)

Unread postby SGINERD » Thu May 03, 2012 4:06 am

I am getting rid of almost all my machines. I have someone looking
for an Onyx2 so I made a trade with skysearcher, worked out great for both
of us.
:Octane2: :Fuel: :Indigo2IMP: :Indigo2IMP: :Indigo2IMP: :Indigo2: :Indigo2: :Indigo2: :Indigo: :O2: :O2: :O2: :O2: :O2: :Indy: :320: :320: :320: :540: :1600SW: :1600SW: :1600SW:


Return to “Hardware For Sale/Trade”

Who is online

Users browsing this forum: No registered users and 3 guests