Nekochan Net

I picked up another Indigo and this one had a dead battery. I could also not get anything out of the serial port using a regular mac serial cable and a powerbook running Zterm (9600, 8, n, 1). I replaced the battery with a CR2032 and I'm still getting the symptoms seen prior to the swap: System chines, flashed the front light orange and displays a random character on the terminal (which is normal when you switch the Indigo on).
I should at the least be getting a complaint about the TOD being wrong, right?

_________________


<-------- A very happy forum member.

Without the new battery, yes. With the new battery soldered, it should not complain that the time is way off, as long as the oscillator is running. Of course there's the possibility of the serial console settings being different than the canonical 9600-8n1, if the previous owner changed it. You might want to tinker with different values; I remember one of my Indy was set up, for some reason, to 2400 bps (``dbaud'' variable).

_________________
R4000 R4400 R4400 R8000 R10000 R4000PC R4000SC R5000SC R5000 RM7000 2xR10000 R12000 - 2x2xR10000 R16000
among more than 150 machines : Apollo, Be, Data General, Digital, HP, IBM, MIPS before SGI, Motorola, NeXT, SGI, Solbourne, Sun...

Null modem?

_________________
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************

"regular" Mac serial cables with MiniDIN-8s on each end are all nulled, Mac cables with a DB-25 and more than 4 pins are often not nulled, and Apple's conceptions of flow control are not always SGI's conceptions of flow control - so be careful if you're using one of these cables with an adaptor.

Best is probably to check the cable using a VOM and the pinouts from the Indigo Owner's Guide.

_________________
Damn the torpedoes, full speed ahead!

Systems available for remote access on request.

(single-CM)

If it helps I also tried with a MiniDIN 8 to DB9 adapter followed by a null modem cable as well but because I can't find my gender adapters I can't go from the adapter straight to the serial port on my VT-100.
I could of sowrn though that in the past I was getting a working console with a mac serial cable running to a MessagePad 130 running NewTerm.

_________________


<-------- A very happy forum member.

For what it's worth, and not exactly related to the topic, I am using Sun DE25<->mini-din serial cables (for use with Sun SPARCstation IPC/IPX systems) to talk to Indigo/Indy/Indigo2 serial ports, and have never had any problems with them.

_________________
R4000 R4400 R4400 R8000 R10000 R4000PC R4000SC R5000SC R5000 RM7000 2xR10000 R12000 - 2x2xR10000 R16000
among more than 150 machines : Apollo, Be, Data General, Digital, HP, IBM, MIPS before SGI, Motorola, NeXT, SGI, Solbourne, Sun...

BuMP.
Ended up getting a new pile of spare CR2032's and the system went right up to a console prompt with a new battery so that last one must of been bad.

_________________


<-------- A very happy forum member.

nice style pent, a duo boots the indigo :)

Not always true - I have some in my box-o-cables that are not nulled. I think some were used with certain Mac-specific modems, and others were extension cables. (No, they're not AppleTalk cables, either )

That said, I imagine that old ImageWriter II printer cables are, by far, the most common 2x MiniDIN-8 Mac serial cables, and they are indeed nulled.

Indeed. Duos make great serial terminals!