Nekochan Net

Official Chat Channel: #nekochan // irc.nekochan.net
It is currently Fri Oct 31, 2014 5:04 am

All times are UTC - 8 hours [ DST ]


Forum rules


Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.



Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next
Author Message
Unread postPosted: Tue Sep 20, 2011 2:28 pm 
Offline
User avatar

Joined: Thu Jun 17, 2004 11:35 am
Posts: 3930
Location: Wijchen, The Netherlands
Looks like I never introduced this one :)

This is a former Discreet Flame station.

It's got a RAD audio board, a PCI card with two extra serial ports, a dual GBit network adapter, two dual 2GBit QL2342 Fibre Channel boards, and of course the DM3. It also came with a DMediaPro breakout box with DM5 installed. The FC disk box with Discreet 'STON+WIR' disks was apparently used with it.

hinv -mv
Code:
Location: /hw/module/001c01/node
       IP59_4CPU Board: barcode NRM277     part 030-1989-003 rev -B
Location: /hw/module/001c01/IXbrick/xtalk/11
       WS_INT_53 Board: barcode NNY825     part 030-1881-007 rev -A
Location: /hw/module/001c01/IXbrick/xtalk/12
      ODY128B1_2 Board: barcode NPL883     part 030-1884-005 rev -B
Location: /hw/module/001c01/IXbrick/xtalk/15
       WS_INT_53 Board: barcode NNY825     part 030-1881-007 rev -A
Location: /hw/module/001c01/IXbrick/xtalk/15/pci-x/0/1/ioc4
             IO9 Board: barcode NRW778     part 030-1771-005 rev -B
Location: /hw/module/001c01/IXbrick/xtalk/15/pci-x/1/2
     PCI_SIO_UFC Board: barcode NSX945     part 030-1657-003 rev  A
4 1.0 GHZ IP35 Processors
CPU: MIPS R16000 Processor Chip Revision: 3.0
FPU: MIPS R16010 Floating Point Chip Revision: 3.0
CPU 0 at Module 001c01/Slot 0/Slice A: 1.0 Ghz MIPS R16000 Processor Chip (enabled)
  Processor revision: 3.0. Scache: Size 16 MB Speed 333 Mhz  Tap 0x15
CPU 1 at Module 001c01/Slot 0/Slice B: 1.0 Ghz MIPS R16000 Processor Chip (enabled)
  Processor revision: 3.0. Scache: Size 16 MB Speed 333 Mhz  Tap 0x15
CPU 2 at Module 001c01/Slot 0/Slice C: 1.0 Ghz MIPS R16000 Processor Chip (enabled)
  Processor revision: 3.0. Scache: Size 16 MB Speed 333 Mhz  Tap 0x15
CPU 3 at Module 001c01/Slot 0/Slice D: 1.0 Ghz MIPS R16000 Processor Chip (enabled)
  Processor revision: 3.0. Scache: Size 16 MB Speed 333 Mhz  Tap 0x15
Main memory size: 8192 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 16 Mbytes
Memory at Module 001c01/Slot 0: 8192 MB (enabled)
  Bank 0 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 1 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 2 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 3 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 4 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 5 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 6 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 7 contains 1024 MB (Premium) DIMMS (enabled)
Integral SCSI controller 3: Version Fibre Channel QL2342 Port 1, 133 MHz PCI-X
Integral SCSI controller 4: Version Fibre Channel QL2342 Port 2, 133 MHz PCI-X
Integral SCSI controller 5: Version Fibre Channel QL2342 Port 1, 133 MHz PCI-X
  Disk drive: unit 0 on SCSI controller 5 (unit 0)
  Disk drive: unit 1 on SCSI controller 5 (unit 1)
  Disk drive: unit 2 on SCSI controller 5 (unit 2)
  Disk drive: unit 3 on SCSI controller 5 (unit 3)
  Disk drive: unit 4 on SCSI controller 5 (unit 4)
  Disk drive: unit 5 on SCSI controller 5 (unit 5)
  Disk drive: unit 6 on SCSI controller 5 (unit 6)
  Disk drive: unit 7 on SCSI controller 5 (unit 7)
  Disk drive: unit 8 on SCSI controller 5 (unit 8)
  Disk drive: unit 9 on SCSI controller 5 (unit 9)
Integral SCSI controller 6: Version Fibre Channel QL2342 Port 2, 133 MHz PCI-X
Integral SCSI controller 2: Version IDE (ATA/ATAPI) IOC4
  CDROM: unit 0 on SCSI controller 2
Integral SCSI controller 0: Version QL12160, low voltage differential
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL12160, low voltage differential
  Disk drive: unit 1 on SCSI controller 1 (unit 1)
  Disk drive: unit 2 on SCSI controller 1 (unit 2)
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3/IOC4 serial port: tty5
IOC3/IOC4 serial port: tty6
Graphics board: V12
Integral Gigabit Ethernet: tg0, module 001c01, PCI bus 1 slot 4
Gigabit Ethernet: tg1, module 001c01, PCI bus 2 slot 3 port 0
Gigabit Ethernet: tg2, module 001c01, PCI bus 2 slot 3 port 1
Iris Audio Processor: version MAD revision 1, number 1
Iris Audio Processor: version RAD revision 13.0, number 1
  PCI Adapter ID (vendor 0x1077, device 0x2312) PCI slot 1
  PCI Adapter ID (vendor 0x1077, device 0x2312) PCI slot 1
  PCI Adapter ID (vendor 0x1077, device 0x2312) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x2312) PCI slot 2
  PCI Adapter ID (vendor 0x10a9, device 0x100a) PCI slot 1
  PCI Adapter ID (vendor 0x104c, device 0xac28) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 3
  PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 4
  PCI Adapter ID (vendor 0x1412, device 0x1724) PCI slot 2
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x14e4, device 0x1648) PCI slot 3
  PCI Adapter ID (vendor 0x14e4, device 0x1648) PCI slot 3
IOC4 firmware revision 83
IOC3/IOC4 external interrupts: 1
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
Dual Channel Display
IP35prom in Module 001c01/Slot n0: Revision 6.211

/usr/gfx/gfxinfo -v
Code:
Graphics board 0 is "ODYSSEY" graphics.
        Managed (":0.0") 2560x1024
        BUZZ version B.2
        PB&J version 1
        128MB memory
                Banks: 4, CAS latency: 3
        DM5 attached to Dual Channel 0
         Monitor 0 type: Unknown
        Dual Channel Display option
         Monitor 1 type: Unknown         Monitor 2 type: Unknown
        Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False
        Channel 0:
         Origin = (0,0)
         Video Output: 1280 pixels, 1024 lines, 60.00Hz (2@1280x1024_60)
         Video Format Flags:  (none)
         Sync Disabled
         Using Gamma Map 0
        Channel 1:
         Origin = (1280,0)
         Video Output: 1280 pixels, 1024 lines, 60.00Hz (2@1280x1024_60)
         Video Format Flags:  (none)
         Sync Disabled
         Using Gamma Map 0

(the V12 is linked to the DM5 using the DCD, an SGI F180 screen is connected to the DM5 output)

diskpatch -v
Code:
sc5d0l0:  Disk         STON+WIRST336607FC      7656  Serial: 3JA0BGYY
sc5d1l0:  Disk         STON+WIRST336607FC      7656  Serial: 3JA04FZG
sc5d2l0:  Disk         STON+WIRST336607FC      7656  Serial: 3JA0C0W0
sc5d3l0:  Disk         STON+WIRST336607FC      7656  Serial: 3JA0C29V
sc5d4l0:  Disk         STON+WIRST336607FC      7656  Serial: 3JA0C1JN
sc5d5l0:  Disk         STON+WIRST336607FC      7656  Serial: 3JA09KJ6
sc5d6l0:  Disk         STON+WIRST336607FC      7656  Serial: 3JA0B9HG
sc5d7l0:  Disk         STON+WIRST336607FC      7656  Serial: 3JA04F7S
sc5d8l0:  Disk         STON+WIRST336607FC      7656  Serial: 3JA03A9R
sc5d9l0:  Disk         STON+WIRST336607FC      7656  Serial: 3JA04BBV
sc0d1l0:  Disk         SEAGATE ST3146855LC     0003  Serial: 3LN34EZD
sc1d1l0:  Disk         SEAGATE ST3300007LW     D703  Serial: 3KR1DMP1
sc1d2l0:  Disk         SEAGATE ST3300007LW     D703  Serial: 3KR1DMN8

l1cmd serial all
Code:
Data                            Location      Value
------------------------------  ------------  --------
Local System Serial Number      NVRAM         P1003388
Reference System Serial Number  NVRAM         P1003388
Local Brick Serial Number       EEPROM        NNY825
Reference Brick Serial Number   NVRAM         NNY825


EEPROM      Product Name    Serial         Part Number           Rev  T/W   
----------  --------------  -------------  --------------------  ---  ------
INTERFACE   WS_INT_53       NNY825         030_1881_007          A    00   
IO9         IO9             NRW778         030_1771_005          B    00   
ODYSSEY     ODY128B1_2      NPL883         030_1884_005          B    00   
SNOWBALL    SNOWBALL_EDGE   NLB858         030_1927_004          A    00   
NODE        IP59_4CPU       NRM277         030_1989_003          B    00   
IO DGHTR    CHWS_IO_DAUG    NNW371         030_1875_003          A    00   

EEPROM     JEDEC-SPD Info           Part Number        Rev  Speed  SGI     
---------- ------------------------ ------------------ ---- ------ --------
DIMM 0     1000000000000000B3005A00 444BH               2     8.0  N/A     
DIMM 2     1000000000000000FB005A00 444BH               2     8.0  N/A     
DIMM 4     CE0000000000000028FB2F00 M3 46L2820BT1-CA0   0B    8.0  N/A     
DIMM 6     7F94FFFFFFFFFFFF045EF00D SM57228DSGI100C2   00FF   8.0  N/A     
DIMM 1     100000000000000046030500 444BH               2     8.0  N/A     
DIMM 3     100000000000000028015A00 444BH               2     8.0  N/A     
DIMM 5     CE00000000000000280C3000 M3 46L2820BT1-CA0   0B    8.0  N/A     
DIMM 7     CE00000000000000274A0A00 M3 46L2820BT1-CA0   0B    8.0  N/A     

l1cmd flash status
Code:
Flash image A currently booted

Image      Status        Revision    Built
-----   -------------   ----------   -----
  A     default         1.38.4       06/30/2005 00:01:55
  B     valid           1.36.14      04/21/2005 09:15:02

l1cmd env
Code:
Environmental monitoring is enabled and running.

Description    State       Warning Limits     Fault Limits       Current
-------------- ----------  -----------------  -----------------  -------
          1.8V    Enabled  10%   1.62/  1.98  20%   1.44/  2.16    1.791
           12V    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.000
        12V #2    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.125
          3.3V    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.337
          2.5V    Enabled  10%   2.25/  2.75  20%   2.00/  3.00    2.496
        12V IO    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.000
        5V AUX    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.044
      3.3V AUX    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.251
            5V    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.044
  XIO 12V BIAS    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   11.938
        XIO 5V    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.070
      XIO 2.5V    Enabled  10%   2.25/  2.75  20%   2.00/  3.00    2.457
  XIO 3.3V AUX    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.302
 IP59 3.3V AUX    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.285
   IP59 5V AUX    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.044
      IP59 12V    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   11.938
     IP59 VCPU    Enabled  10%   1.14/  1.40  20%   1.02/  1.52    1.269
     IP59 SRAM    Enabled  10%   2.25/  2.75  20%   2.00/  3.00    2.470
     IP59 1.5V    Enabled  10%   1.35/  1.65  20%   1.20/  1.80    1.480

Description     State       Warning RPM  Current RPM
--------------- ----------  -----------  -----------
FAN  0   NODE 1    Enabled         1800         2109
FAN  1   NODE 2    Enabled         1800         2149
FAN  2   NODE 3    Enabled         1800         2177
FAN  3    PCI 1    Enabled         1350         1480
FAN  4    PCI 2    Enabled         1350         1548
FAN  5       HD    Enabled         1620         2033
FAN  6    ODY 1    Enabled         1300         1687
FAN  7    ODY 2    Enabled         1300         1622
FAN  8  N0 LEFT    Enabled         1800         2238
FAN  9  N0 CNTR    Enabled         1800         2127
FAN 10 N0 RIGHT    Enabled         1800         2238

                              Advisory   Critical   Fault      Current     
Description       State       Temp       Temp       Temp       Temp       
----------------- ----------  ---------  ---------  ---------  --------- 
 0 INTERFACE 0       Enabled    [Autofan Control]    76C/168F   40C/104F
 1 INTERFACE 1       Enabled    [Autofan Control]    76C/168F   35C/ 95F
 2 INTERFACE 2       Enabled    [Autofan Control]    76C/168F   34C/ 93F
 3 INTERFACE 3       Enabled    [Autofan Control]    76C/168F   43C/109F
 4 ODYSSEY           Enabled    [Autofan Control]    76C/168F   45C/113F
 5 NODE              Enabled    [Autofan Control]    76C/168F   50C/122F
 6 BEDROCK           Enabled    [Autofan Control]    85C/185F   48C/118F

                     Zone Temp     Target    Current   Zone Fan   Curr/Min
Zone Name  State     Sensors       Average   Average   Index      Fan %
---------  --------  ------------  --------  --------  ---------  ---------
NODE        Enabled           5,6  53C/127F  49C/120F          0   46%/ 46%
BOOST       Enabled           N/A       N/A       N/A     8,9,10   50%/ 50%
HD          Enabled           N/A       N/A       N/A          5   38%/ 38%
PCI         Enabled       0,1,2,3  45C/113F  38C/100F        3,4   57%/ 57%
ODY         Enabled             4  50C/122F  45C/113F          6   64%/ 64%

l1cmd pci
Code:
                                   
Bus Slot Stat    Power Mode/Speed 
--- ---- ------- ----- -----------
  1    1 0x80 01   15W PCI   66MHz
  2    1 0x00 00  7.5W PCI   33MHz
  2    2 0x00 00  7.5W PCI   33MHz
  2    3 0x00 0d   15W PCI   33MHz
  3    1 0x00 0f  none PCIX 133MHz
  3    2 0x00 0d   15W PCIX 133MHz
  4    1 0x00 0d   15W PCIX 133MHz
  4    2 0x00 0f  none PCIX 133MHz

_________________
Now this is a deep dark secret, so everybody keep it quiet :)
It turns out that when reset, the WD33C93 defaults to a SCSI ID of 0, and it was simpler to leave it that way... -- Dave Olson, in comp.sys.sgi

Currently in commercial service: Image :Onyx2:(2x) :O3x02L:
In the museum: almost every MIPS/IRIX system.
Wanted: GM1 board for Professional Series GT graphics (030-0076-003, 030-0076-004)


Last edited by jan-jaap on Mon Sep 26, 2011 2:52 pm, edited 4 times in total.

Top
 Profile  
 
Unread postPosted: Tue Sep 20, 2011 2:43 pm 
Offline
User avatar

Joined: Tue Aug 14, 2007 12:13 am
Posts: 235
Location: Spain
Is the next purchase will be a building to keep your computers?

Super nice machine!!!

_________________
Alberto
:Fuel: :Octane2: :1600SW: :O2: :O2: :1600SW:
http://www.f3b.es
http://unixverse.blogspot.com


Top
 Profile  
 
Unread postPosted: Wed Sep 21, 2011 12:45 am 
Offline
User avatar

Joined: Thu Jun 17, 2004 11:35 am
Posts: 3930
Location: Wijchen, The Netherlands
Titox wrote:
Is the next purchase will be a building to keep your computers?

Yes (not kidding!)

Titox wrote:
Super nice machine!!!

Thanks!

_________________
Now this is a deep dark secret, so everybody keep it quiet :)
It turns out that when reset, the WD33C93 defaults to a SCSI ID of 0, and it was simpler to leave it that way... -- Dave Olson, in comp.sys.sgi

Currently in commercial service: Image :Onyx2:(2x) :O3x02L:
In the museum: almost every MIPS/IRIX system.
Wanted: GM1 board for Professional Series GT graphics (030-0076-003, 030-0076-004)


Top
 Profile  
 
Unread postPosted: Wed Sep 21, 2011 12:56 am 
Offline

Joined: Thu May 08, 2008 12:12 pm
Posts: 572
Location: Uppsala, Sweden
I too am looking for a house to properly house the collection. I'm having nightmares over house prices here, but I guess the Netherlands are even worse.

Congratulations on a great machine.

_________________
:Onyx2R: :IRIS3130: :Onyx2: :O2000: :O200: :PI: :Fuel: :Indigo: :Octane: :O2: :Indigo2IMP: :Indigo2: :Indy: :1600SW: :pdp8e:
:BA213: <- MicroVAX 3500 :BA213: <- DECsystem 5500 :BA215: <- MicroVAX 3300
Pictures of my collection: www.pdp8.se


Top
 Profile  
 
Unread postPosted: Wed Sep 21, 2011 1:40 am 
Offline
User avatar

Joined: Tue Sep 21, 2004 12:05 pm
Posts: 256
Location: Vevey, Switzerland
Quote:
I'm having nightmares over house prices here, but I guess the Netherlands are even worse.

Don't even think about swiss prices... or you will cry.

_________________
:Onyx2: : oxygen / :A3504L: :A3504L: : neon (16xItanium2 1.6, L2 9MB) / :O200: :O200: : beryllium
:Fuel: : nitrogen / :Octane2: : carbon / :Octane: : fluorine
:O2: : hydrogen (R10k 195, 512Mo) / :O2: : sodium (R5k 180, 512Mo) / :O2: : R5k 180->200 motherboard and PM only
:Indigo2IMP: : helium (R10k 195, HighImpact, 160Mo) / :Indigo2IMP: : boron / :Indigo: : magnesium
:4D70G: 4D70GT : hydrogen, my very first one (now property of musée bolo and the foundation mémoires informatiques)
See the hinv/gfxinfo posts here.


Top
 Profile  
 
Unread postPosted: Wed Sep 21, 2011 1:57 am 
Offline
User avatar

Joined: Thu Jun 17, 2004 11:35 am
Posts: 3930
Location: Wijchen, The Netherlands
I'm not going to buy a new house, I want to build an annex. There's nothing wrong with our current house, except that I had to give up my computer room when we had our second son. So right now my collection is split between the attic (cramped and dusty due to the washing machine & laundry dryer), and garage (not a bad garage as far as garages go, but obviously sub-optimal).

A new annex is hopefully going to provide a permanent home for my collection, and a clear separation between family life and hobby, so I won't need to worry that my boys will be harmed by the computers (or vice versa).

Now that I have the Tezro, I more or less have a sample of every MIPS/IRIX generation (family?). Good thing they stopped making them, or I would need a mansion instead of an annex :lol: Let's see:

workstations:
* Personal IRIS 4D/35
* Indigo R3000
* Indigo R4400 Elan
* Indy R4400 XZ
* Indy R5000
* Challenge S
* Indigo2 R4400 Extreme
* Indigo2 R8000 XZ
* Indigo2 R10000 MaxImpact
* O2 R12K/400
* Octane1 2x400 MXE
* Octane2 2x600 V12
* Fuel V12
* Tezro V12

big(ger) iron:
* Professional IRIS 4D/70GT
* PowerSeries 4D/380VGX
* PowerSeries 4D/440VGX
* Crimson RE
* Power Challenge L
* Onyx1 IR
* Origin 200
* Onyx2 IR3
* Origin 350

... and I probably forgot something. For several systems (mostly the workstations) I have spare systems. Additionally, I've got a friggin huge pile of spares so I can easily change e.g. the 4D/35 into a 4D/20 or transform the Power Challenge from 12xR10K/IRIX6.2 into 12xR4400/IRIX5.3 by swapping some bits and a system disk.

_________________
Now this is a deep dark secret, so everybody keep it quiet :)
It turns out that when reset, the WD33C93 defaults to a SCSI ID of 0, and it was simpler to leave it that way... -- Dave Olson, in comp.sys.sgi

Currently in commercial service: Image :Onyx2:(2x) :O3x02L:
In the museum: almost every MIPS/IRIX system.
Wanted: GM1 board for Professional Series GT graphics (030-0076-003, 030-0076-004)


Top
 Profile  
 
Unread postPosted: Wed Sep 21, 2011 12:34 pm 
Offline

Joined: Sat Jun 11, 2011 9:04 pm
Posts: 35
Damn, even I'll admit that's a pretty nice system ;)


Top
 Profile  
 
Unread postPosted: Fri Sep 23, 2011 3:39 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sun Jun 06, 2004 5:55 pm
Posts: 5219
Location: NC - USA
Just got back from a relatively brief road trip (so sorry for the belated response), but nice system j-j (it don't get much better than that)!!!

_________________
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************


Top
 Profile  
 
Unread postPosted: Sat Sep 24, 2011 11:26 am 
Offline

Joined: Thu Oct 06, 2005 12:01 pm
Posts: 81
Location: Bonn / Germany
Really nice machine, you told me you got the tezro, but the specs are really nice... :mrgreen:
This reminds me that i need to get the stones for my octane to get everything up and running

_________________
:Indigo: :Indigo2IMP: :Indigo2IMP: :Octane: :O2: :O200: :Octane2: :Onyx2: :Onyx2: :Onyx2R: :1600SW: :1600SW:


Top
 Profile  
 
Unread postPosted: Mon Sep 26, 2011 2:51 pm 
Offline
User avatar

Joined: Thu Jun 17, 2004 11:35 am
Posts: 3930
Location: Wijchen, The Netherlands
Finally found back the box of O3K DIMMs that had been missing for half a year :roll: So now the tezro has 8GB RAM. I added a DCD as well.

_________________
Now this is a deep dark secret, so everybody keep it quiet :)
It turns out that when reset, the WD33C93 defaults to a SCSI ID of 0, and it was simpler to leave it that way... -- Dave Olson, in comp.sys.sgi

Currently in commercial service: Image :Onyx2:(2x) :O3x02L:
In the museum: almost every MIPS/IRIX system.
Wanted: GM1 board for Professional Series GT graphics (030-0076-003, 030-0076-004)


Top
 Profile  
 
Unread postPosted: Thu Oct 20, 2011 2:38 pm 
Offline
User avatar

Joined: Thu Jun 17, 2004 11:35 am
Posts: 3930
Location: Wijchen, The Netherlands
Some pictures:
Attachment:
tezro_1.jpg
tezro_1.jpg [ 158.13 KiB | Viewed 1317 times ]
To the left the DMedia breakout box, with the 'black' and 'white' LVDS cables

Attachment:
tezro_2.jpg
tezro_2.jpg [ 120.89 KiB | Viewed 1317 times ]
It's magic 8-)

_________________
Now this is a deep dark secret, so everybody keep it quiet :)
It turns out that when reset, the WD33C93 defaults to a SCSI ID of 0, and it was simpler to leave it that way... -- Dave Olson, in comp.sys.sgi

Currently in commercial service: Image :Onyx2:(2x) :O3x02L:
In the museum: almost every MIPS/IRIX system.
Wanted: GM1 board for Professional Series GT graphics (030-0076-003, 030-0076-004)


Top
 Profile  
 
Unread postPosted: Fri Oct 21, 2011 1:48 pm 
Offline
User avatar

Joined: Tue Aug 14, 2007 12:13 am
Posts: 235
Location: Spain
Beautiful!!!

Why an Autodesk/Discreet system needs 3 Gigabit ethernet ports?

_________________
Alberto
:Fuel: :Octane2: :1600SW: :O2: :O2: :1600SW:
http://www.f3b.es
http://unixverse.blogspot.com


Top
 Profile  
 
Unread postPosted: Sun Oct 23, 2011 1:59 pm 
Offline
User avatar

Joined: Thu Jun 17, 2004 11:35 am
Posts: 3930
Location: Wijchen, The Netherlands
Titox wrote:
Why an Autodesk/Discreet system needs 3 Gigabit ethernet ports?

I have no idea (not a Discreet user), but if you look around you'll see that all these (former) Discreet systems have more or less the same cards installed:
Attachment:
discreet_tezro.jpg
discreet_tezro.jpg [ 63.1 KiB | Viewed 1252 times ]

(the picture shows a single port ethernet card, but they always seem to be dual port, like my system)

Source: http://download.autodesk.com/us/systemd ... ctane2.pdf

My Tezro:
Attachment:
SDIM8720.jpg
SDIM8720.jpg [ 72.8 KiB | Viewed 1252 times ]

_________________
Now this is a deep dark secret, so everybody keep it quiet :)
It turns out that when reset, the WD33C93 defaults to a SCSI ID of 0, and it was simpler to leave it that way... -- Dave Olson, in comp.sys.sgi

Currently in commercial service: Image :Onyx2:(2x) :O3x02L:
In the museum: almost every MIPS/IRIX system.
Wanted: GM1 board for Professional Series GT graphics (030-0076-003, 030-0076-004)


Top
 Profile  
 
Unread postPosted: Mon Oct 24, 2011 2:20 am 
Offline
User avatar

Joined: Tue Aug 14, 2007 12:13 am
Posts: 235
Location: Spain
Related to the license system?

If the license is linked to a MAC address maybe is easy to move the license with the ethernet card? But is pure speculation.

_________________
Alberto
:Fuel: :Octane2: :1600SW: :O2: :O2: :1600SW:
http://www.f3b.es
http://unixverse.blogspot.com


Top
 Profile  
 
Unread postPosted: Mon Oct 24, 2011 2:33 am 
Offline
User avatar

Joined: Thu Jun 17, 2004 11:35 am
Posts: 3930
Location: Wijchen, The Netherlands
That's not it. Discreet software is node locked with a dongle attached to one of the serial ports.

Maybe it has something to do with a dedicated network segment for rendering nodes or frame storage.

_________________
Now this is a deep dark secret, so everybody keep it quiet :)
It turns out that when reset, the WD33C93 defaults to a SCSI ID of 0, and it was simpler to leave it that way... -- Dave Olson, in comp.sys.sgi

Currently in commercial service: Image :Onyx2:(2x) :O3x02L:
In the museum: almost every MIPS/IRIX system.
Wanted: GM1 board for Professional Series GT graphics (030-0076-003, 030-0076-004)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group