Nekoware strange behaviour

IRIX and IRIX software discussion including open source and commerical offerings.
Forum rules
Any posts concerning pirated software or offering to buy/sell/trade commercial software are subject to removal.
User avatar
Geoman
Donor
Donor
Posts: 720
Joined: Thu May 26, 2005 3:37 am
Location: Munich, Germany
Contact:

Nekoware strange behaviour

Unread postby Geoman » Wed Jun 29, 2011 10:00 am

So I started my Octane after a long time, and tried to nekosync my nekoware, but here is all, that comes:

Code: Select all

Octane2 1% nekosync

nekosync finished at Wed Jun 29 16:57:05 2011


Last time I used, it worked perfectly well - and I did not alter any settings.
:Octane2: 2xR12000 400MHz, 4GB RAM, V12
SGI - the legend will never die!!

User avatar
dclough
Posts: 194
Joined: Mon Jan 18, 2010 7:59 pm
Contact:

Re: Nekoware strange behaviour

Unread postby dclough » Wed Jun 29, 2011 3:00 pm

You may need to define a "long time". A few months ago the primary mirror was changed and I believe the old primary mirror is no longer in service.

Check your server settings, and if needed update it to the server listed in my sig.

User avatar
Geoman
Donor
Donor
Posts: 720
Joined: Thu May 26, 2005 3:37 am
Location: Munich, Germany
Contact:

Re: Nekoware strange behaviour

Unread postby Geoman » Sat Jul 02, 2011 7:03 am

Thanks for your reply! I solved the problem by reinstalling nekosync from http://irix-tools.homeunix.net/.
Using the
$mirror = 'http://www.mechanics.citg.tudelft.nl/~everdij/nekoware/current';
$rmirror = 'mech001.citg.tudelft.nl::nekoware/current/*.tardist';

Great, that you provide a mirror, but unfortunately it gives me:
WARN: Specified directory http://nekoware.dustytech.net/ is empty, or network disconnected
$mirror = 'http://nekoware.dustytech.net';
$rmirror = 'nekoware.dustytech.net::Nekoware/current/*.tardist';
Last edited by Geoman on Mon Jul 04, 2011 2:55 am, edited 1 time in total.
:Octane2: 2xR12000 400MHz, 4GB RAM, V12
SGI - the legend will never die!!

User avatar
dclough
Posts: 194
Joined: Mon Jan 18, 2010 7:59 pm
Contact:

Re: Nekoware strange behaviour

Unread postby dclough » Sat Jul 02, 2011 10:01 pm

The uppercase N in nekoware.dustytech.net::Nekoware/current/ is throwing it off, or at least it does so for my rsync client.

nekoware.dustytech.net::nekoware/current/ works for me. :) Also the mirror is accessible over HTTP from my end, so typo would be my initial guess.

User avatar
recondas
Moderator
Moderator
Posts: 5392
Joined: Sun Jun 06, 2004 5:55 pm
Location: NC - USA

Re: Nekoware strange behaviour

Unread postby recondas » Sun Jul 03, 2011 5:44 am

I've dustytech numerous times and it's always worked flawlessly. Thank you again for hosting the primary nekoware mirror.
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************


Return to “IRIX and Software”

Who is online

Users browsing this forum: No registered users and 0 guests