My SGI Coffee Mug Design...

Open discussion on or around SGI; software/hardware related posts should go in the appropriate subforum.
Forum rules
Any posts concerning pirated software or offering to buy/sell/trade commercial software are subject to removal.
User avatar
recondas
Moderator
Moderator
Posts: 5278
Joined: Sun Jun 06, 2004 5:55 pm
Location: NC - USA

Re: My SGI Coffee Mug Design...

Unread postby recondas » Fri Nov 19, 2010 4:42 am

Tabalabs wrote:Will you sell it? :D
That's the whole point..... jump back to the first page of this thread for some additional info.
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************

User avatar
Tabalabs
Posts: 100
Joined: Thu Nov 11, 2010 1:43 pm
Location: Rio de Janeiro, Brazil
Contact:

Re: My SGI Coffee Mug Design...

Unread postby Tabalabs » Fri Nov 19, 2010 8:23 am

ooops :O Sorry you all...Where is the "dumb" hat? :(
THE dream come true: Silicon Graphics' Octane
Image Octane R10000 225MHz, 2GB RAM, 1x36GB HDs, 21" monitor, SSI (no TRAM) graphics

User avatar
Tabalabs
Posts: 100
Joined: Thu Nov 11, 2010 1:43 pm
Location: Rio de Janeiro, Brazil
Contact:

Re: My SGI Coffee Mug Design...

Unread postby Tabalabs » Fri Nov 19, 2010 12:29 pm

Sorry, I had to do it myself :) I wanted a SGI cup and my netscape original one is shattered :P

canecas2.jpg
THE dream come true: Silicon Graphics' Octane
Image Octane R10000 225MHz, 2GB RAM, 1x36GB HDs, 21" monitor, SSI (no TRAM) graphics

User avatar
miod
Posts: 318
Joined: Fri Oct 09, 2009 2:44 am
Location: Orgerus (France)
Contact:

Re: My SGI Coffee Mug Design...

Unread postby miod » Fri Nov 19, 2010 12:29 pm

zackwatt wrote:From design to reality!

IMG_6576.jpg


IMG_6577.jpg


It looks like we are ready for our big order now!


Lovely! Looking forward for the mass production!
:Indigo:R4000 :Indigo:R4000 :Indigo:R4000 :Indigo2:R4400 :Indigo2IMP:R4400 :Indigo2:R8000 :Indigo2IMP:R10000 :Indy:R4000PC :Indy:R4000SC :Indy:R4600 :Indy:R5000SC :O2:R5000 :O2:RM7000 :Octane:2xR10000 :Octane:R12000 :O200:2xR12000 :O200: - :O200:2x2xR10000 :Fuel:R16000 :O3x0:4xR16000 :A350:
among more than 150 machines : Apollo, Data General, Digital, HP, IBM, MIPS before SGI, Motorola, NeXT, SGI, Solbourne, Sun...

User avatar
zackwatt
Posts: 460
Joined: Sun Mar 01, 2009 9:53 am
Location: Kentucky

Re: My SGI Coffee Mug Design...

Unread postby zackwatt » Sat Nov 20, 2010 7:43 pm

Well, I guess we are ready for mass production.

The only thing is, am leaving town for a month...starting Fri (26th)

So, I think it would be best if we can wait for the first of the year, collect the funds, place the order and then I will individually mail out the mugs.
:Octane2: :Octane2: :Octane: :Indigo2IMP: :Indigo2: :O2: :O2+:

Octane2 2x600 V12 8GB
- Octane2 600 V12 2GB - Octane 2x400 V10 2GB
Indigo² 195 Max Impact 386MB - Indigo² 250 Extreme 386MB
O2 350 CRM 256MB - O2+ 400 CRM 512MB

"I'm totally unappreciated in my time. You can run this whole park from this room, with minimal staff, for up to three days. You think that kind of automation is easy? Or cheap? You know anybody who can network eight Connection Machines and de-bug two million lines of code for what I bid this job? Because if you can, I'd love to see him try."

User avatar
vishnu
Posts: 2186
Joined: Sun Mar 18, 2007 3:25 pm
Location: Minneapolis, Minnesota USA

Re: My SGI Coffee Mug Design...

Unread postby vishnu » Sat Dec 11, 2010 2:06 pm

zackwatt wrote:So, I think it would be best if we can wait for the first of the year, collect the funds, place the order and then I will individually mail out the mugs.
I totally appreciate your efforts on this zack, thanks!!! :mrgreen:
Tabalabs wrote:Sorry, I had to do it myself :) I wanted a SGI cup and my netscape original one is shattered :P

Ha ha, does that ever look familiar! :lol:
Image
Project:
Temporarily lost at sea...
Plan:
World domination! Or something...

User avatar
Tabalabs
Posts: 100
Joined: Thu Nov 11, 2010 1:43 pm
Location: Rio de Janeiro, Brazil
Contact:

Re: My SGI Coffee Mug Design...

Unread postby Tabalabs » Sat Dec 11, 2010 11:56 pm

I should have brought home that octane2 skin I found where I bought mine...It is SO much more beautiful in blue... :(

I have the original netscape mug, but it was shattered by a girlfriend (grrrrr...), and never find another to buy :( I stil have it, glued. :(
THE dream come true: Silicon Graphics' Octane
Image Octane R10000 225MHz, 2GB RAM, 1x36GB HDs, 21" monitor, SSI (no TRAM) graphics

User avatar
vishnu
Posts: 2186
Joined: Sun Mar 18, 2007 3:25 pm
Location: Minneapolis, Minnesota USA

Re: My SGI Coffee Mug Design...

Unread postby vishnu » Sun Dec 12, 2010 12:51 pm

My Netscape mug is mint, wish I could say that about my Netscape t-shirts!
Project:
Temporarily lost at sea...
Plan:
World domination! Or something...

User avatar
zackwatt
Posts: 460
Joined: Sun Mar 01, 2009 9:53 am
Location: Kentucky

Re: My SGI Coffee Mug Design...

Unread postby zackwatt » Sun Jan 16, 2011 8:54 am

Ok, I am back and ready to knock this out...

Here is the list:

nekonoko - 1
smj - 2
recondas - 1
zuluchas -2
Pontus - 3
bigD - 1
miod - 1
vishnu - 2
sybrfreq - 1
Escher - 1
dc_v01 - 1
frood - 1
jeffwa - 1
Thomas W. - 1
SAQ - 1

The cost is going to be 15.00 per mug + shipping to you.

I will PM each of you with more details.
Last edited by zackwatt on Mon Jan 17, 2011 1:25 pm, edited 1 time in total.
:Octane2: :Octane2: :Octane: :Indigo2IMP: :Indigo2: :O2: :O2+:

Octane2 2x600 V12 8GB
- Octane2 600 V12 2GB - Octane 2x400 V10 2GB
Indigo² 195 Max Impact 386MB - Indigo² 250 Extreme 386MB
O2 350 CRM 256MB - O2+ 400 CRM 512MB

"I'm totally unappreciated in my time. You can run this whole park from this room, with minimal staff, for up to three days. You think that kind of automation is easy? Or cheap? You know anybody who can network eight Connection Machines and de-bug two million lines of code for what I bid this job? Because if you can, I'd love to see him try."

SAQ
Posts: 5758
Joined: Wed Jul 19, 2006 8:37 am
Location: Renton, WA

Re: My SGI Coffee Mug Design...

Unread postby SAQ » Mon Jan 17, 2011 9:17 am

I'll go ahead and get one.
Damn the torpedoes, full speed ahead!

There are those who say I'm a bit of a curmudgeon. To them I reply: "GET OFF MY LAWN!"

:Indigo: :Octane: :Indigo2: :Indigo2IMP: :Indy: :PI: :O3x0: :ChallengeL: :O2000R: (single-CM)

User avatar
zackwatt
Posts: 460
Joined: Sun Mar 01, 2009 9:53 am
Location: Kentucky

Re: My SGI Coffee Mug Design...

Unread postby zackwatt » Mon Jan 17, 2011 1:25 pm

SAQ wrote:I'll go ahead and get one.


It's your lucky day!
:Octane2: :Octane2: :Octane: :Indigo2IMP: :Indigo2: :O2: :O2+:

Octane2 2x600 V12 8GB
- Octane2 600 V12 2GB - Octane 2x400 V10 2GB
Indigo² 195 Max Impact 386MB - Indigo² 250 Extreme 386MB
O2 350 CRM 256MB - O2+ 400 CRM 512MB

"I'm totally unappreciated in my time. You can run this whole park from this room, with minimal staff, for up to three days. You think that kind of automation is easy? Or cheap? You know anybody who can network eight Connection Machines and de-bug two million lines of code for what I bid this job? Because if you can, I'd love to see him try."

tingo
Posts: 262
Joined: Sat Jun 26, 2010 5:40 pm
Location: Oslo, Norway

Re: My SGI Coffee Mug Design...

Unread postby tingo » Tue Jan 18, 2011 2:09 pm

And shipping (cost) to Norway is
a) unknown?
b) out of the question?
Torfinn

SAQ
Posts: 5758
Joined: Wed Jul 19, 2006 8:37 am
Location: Renton, WA

Re: My SGI Coffee Mug Design...

Unread postby SAQ » Thu Feb 24, 2011 11:27 am

What's up with this now? Haven't heard much for the past mes-y-medio. Just want to make sure someone isn't getting very irritated with me because no money has been forthcoming.
Damn the torpedoes, full speed ahead!

There are those who say I'm a bit of a curmudgeon. To them I reply: "GET OFF MY LAWN!"

:Indigo: :Octane: :Indigo2: :Indigo2IMP: :Indy: :PI: :O3x0: :ChallengeL: :O2000R: (single-CM)

User avatar
zackwatt
Posts: 460
Joined: Sun Mar 01, 2009 9:53 am
Location: Kentucky

Re: My SGI Coffee Mug Design...

Unread postby zackwatt » Sat Feb 26, 2011 9:50 am

No, dude. I haven't accepted any payments because I have been swamped with work...and haven't had time to work on this. I apologize for it.
:Octane2: :Octane2: :Octane: :Indigo2IMP: :Indigo2: :O2: :O2+:

Octane2 2x600 V12 8GB
- Octane2 600 V12 2GB - Octane 2x400 V10 2GB
Indigo² 195 Max Impact 386MB - Indigo² 250 Extreme 386MB
O2 350 CRM 256MB - O2+ 400 CRM 512MB

"I'm totally unappreciated in my time. You can run this whole park from this room, with minimal staff, for up to three days. You think that kind of automation is easy? Or cheap? You know anybody who can network eight Connection Machines and de-bug two million lines of code for what I bid this job? Because if you can, I'd love to see him try."

User avatar
smj
Posts: 1430
Joined: Mon Nov 12, 2007 7:54 pm
Location: Berkeley, CA, USA, NA, Earth, Sol
Contact:

Re: My SGI Coffee Mug Design...

Unread postby smj » Mon Feb 28, 2011 4:30 pm

Whew - when I saw this topic in the active list I was suddenly afraid I'd forgotten to do something...
Then? :IRIS3130: ... Now? :O3x02L: :A3504L:- :A3502L: :1600SW:+MLA :Fuel: :Octane2: :Octane: :Indigo2IMP: ... Other: DEC :BA213: :BA123: Sun, DG AViiON, NeXT :Cube:


Return to “SGI: Discussion”

Who is online

Users browsing this forum: No registered users and 0 guests