If anyone ends up needing one, I have a spare IO9.ramq wrote:The Base Compute Module works standalone just like any standard system. They are fitted with an IO9 adapter card which provides gigabit Ethernet, SCSI for internal disks, IDE for system CD/DVD-ROM and provides NVRAM to keep system enviroments. There's also correct IDE+SCSI cabling for the drives and ofcourse disk sleds. Without the IO9 card the machine cannot work standalone. (These cards are a rare sight and often cost lots of money on eBay)
The MPX Module lacks the IO9 daughtercard, the drive cables and sleds. (Without this it won't work standalone and must be connected to either a Base Compute Module or a NUMAlink router.) Other than that, it's an ordinary Origin brick.
recondas wrote:The O350 can also easily be converted into the functional equivalent of a rack-mount Tezro Workstation with the addition of a Fuel VPro board: the original discussion is here; a photo how-to of the O350/VPro installation process is here; and instructions for changing the PROM splash-screen to display as a Tezro are here. It'd be a pretty nice way to end up with a quad processor - VPro equipped workstation.
Drive? For whatever reason you're making way too much out of Tezro PROM screen switch. It's there as an option for whoever owns a capable system, to use or not as they see fit. Nothing more, nothing less.SAQ wrote:I've not understood the drive to "convert" to a Tezro. The Onyx350 InfinitePerformance will do anything a Tezro will do and maintains the possibility of further expansion later. Is the InfinitePerformance splash screen just really bad looking?
ramq wrote:Hey, it started if August, so you had the end of the summer to decide anyway.
ramq wrote:Two of the modules went to Holland
Code: Select all
speedo 8# hinv
8 700 MHZ IP35 Processors
CPU: MIPS R16000 Processor Chip Revision: 2.1
FPU: MIPS R16010 Floating Point Chip Revision: 2.1
Main memory size: 5120 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Integral SCSI controller 2: Version IDE (ATA/ATAPI) IOC4
Integral SCSI controller 0: Version QL12160, low voltage differential
Disk drive: unit 1 on SCSI controller 0
Integral SCSI controller 1: Version QL12160, low voltage differential
Integral SCSI controller 3: Version LS1030, low voltage differential
Integral SCSI controller 4: Version LS1030, low voltage differential
IOC3/IOC4 serial port: tty9
IOC3/IOC4 serial port: tty10
IOC3/IOC4 serial port: tty11
IOC3/IOC4 serial port: tty12
Integral Gigabit Ethernet: tg0, module 001c01, PCI bus 1 slot 4
IOC3/IOC4 external interrupts: 1
ramq wrote:(Qty 1) Origin 350 - MPX Module (Had two, one of them sold)
Users browsing this forum: No registered users and 1 guest