Nekochan Net

Official Chat Channel: #nekochan // irc.nekochan.net
It is currently Thu Sep 18, 2014 9:49 pm

All times are UTC - 8 hours


Forum rules


Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.



Post new topic Reply to topic  [ 6 posts ] 
Author Message
Unread postPosted: Thu May 20, 2010 7:56 pm 
Offline
User avatar

Joined: Mon Sep 12, 2005 7:32 pm
Posts: 352
Location: New York, USA
As it happens, this is actually my first hinv post....ironic that it should be an Altix and so doesn't actually have a hinv...but I'll give it a go anyway. :)

we'll start with the boot process:

Code:
001c01#0c: SGI SAL Version 4.33 rel050928 IP41 built 01:41:32 PM Sep 28, 2005
001c01#0a: SGI SAL Version 4.33 rel050928 IP41 built 01:41:32 PM Sep 28, 2005
Found I/O brick attached to module/001c01/slab/0/node
Probing memory DIMMs ......................             DONE
Initializing memory controller ............             DONE
Testing memory ............................             DONE
Initializing memory .....................               DONE
Switching to RAM and testing CPU ..........             DONE
Discovering NUMAlink connectivity .........             DONE
Found 1 objects (1 chipsets, 0 routers, 0 iochipsets) in 3 usec
Waiting for peers to complete discovery....             DONE
NOTICE:  no NI ports are up, ICC underflow WAR disabled
Discovering local I/O on nasid 0 .........              DONE
Checking partitioning information .........             DONE
Erecting partition fences .................             DONE
2 CPUs on 1 nodes found.
\
Decompressing SAL runtime .................             DONE
Loading SAL runtime .......................             DONE
Decompressing EFI .........................             DONE
Loading EFI ...............................             DONE

                Altix IO Topology Information
                *****************************


Serial Number:R2001162

PCI SEGMENT PCIBUS NUMBER     BRICK  RACK:SLOT  BUS       CONNECTION TOPOLOGY
----------- -------------     ---------------------       -------------------
  0x0000        0x01         OPbrick  001:01    01      001c01:slab0:widget15:bus0
  0x0000        0x02         OPbrick  001:01    02      001c01:slab0:widget15:bus1


LocateHandleBuffer returned error Warning Unknown Glyph
EFI version 1.10 [14.62] Build flags: EFI64 Running on Intel(R) Itanium Processor EFI_DEBUG
EFI IA-64 SDV/FDK (No BIOS ) [Sep 28 2005 13:27:33] - INTEL

Copyright (c) 2000-2005 Broadcom Corporation
Broadcom NetXtreme Gigabit Ethernet EFI driver v8.1.1

Broadcom NetXtreme Gigabit Ethernet (BCM5701) is detected (PCI)

EFI Boot Manager ver 1.10 [14.62]

Partition  0:                           Enabled Disabled
    CBricks          1         Nodes          1        0
    RBricks          0         CPUs           2        0
    IOBricks         1         Mem(GB)        4        0

Loading device drivers

EFI Boot Manager ver 1.10 [14.62]

Partition  0:                           Enabled Disabled
    CBricks          1         Nodes          1        0
    RBricks          0         CPUs           2        0
    IOBricks         1         Mem(GB)        4        0

Please select a boot option






some cpu info:

Code:
processor  : 0
vendor     : GenuineIntel
arch       : IA-64
family     : 31
model      : 1
model name : Madison
revision   : 5
archrev    : 0
features   : branchlong
cpu number : 0
cpu regs   : 4
cpu MHz    : 1400.000
itc MHz    : 1400.000000
BogoMIPS   : 2097.15
siblings   : 1
physical id: 0

processor  : 1
vendor     : GenuineIntel
arch       : IA-64
family     : 31
model      : 1
model name : Madison
revision   : 5
archrev    : 0
features   : branchlong
cpu number : 0
cpu regs   : 4
cpu MHz    : 1400.000
itc MHz    : 1400.000000
BogoMIPS   : 2097.15
siblings   : 1
physical id: 0


and some memory info:

Code:
MemTotal:      3972016 kB
MemFree:       3874592 kB
Buffers:           848 kB
Cached:          34320 kB
SwapCached:          0 kB
Active:          31680 kB
Inactive:        13280 kB
SwapTotal:    16401856 kB
SwapFree:     16401856 kB
Dirty:              32 kB
Writeback:           0 kB
AnonPages:        9824 kB
Mapped:           8912 kB
Slab:             9984 kB
SReclaimable:     2656 kB
SUnreclaim:       7328 kB
PageTables:       1056 kB
NFS_Unstable:        0 kB
Bounce:              0 kB
WritebackTmp:        0 kB
CommitLimit:  18387856 kB
Committed_AS:    47920 kB
VmallocTotal: 137429812224 kB
VmallocUsed:     23680 kB
VmallocChunk: 137429787312 kB
HugePages_Total:     0
HugePages_Free:      0
HugePages_Rsvd:      0
HugePages_Surp:      0
Hugepagesize:    262144 kB


and end with a dmesg:

Code:
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.26-2-mckinley (Debian 2.6.26-21lenny4) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Tue Mar 9 23:12:51 UTC 2010
[    0.000000] EFI v1.10 by INTEL: SALsystab=0x30027c8df0 ACPI 2.0=0x30027c95c0
[    0.000000] booting generic kernel on platform sn2
[    0.000000] console [sn_sal0] enabled
[    0.000000] ACPI: RSDP 30027C95C0, 0024 (r2    SGI)
[    0.000000] ACPI: XSDT 30027C9600, 004C (r1    SGI  XSDTSN2    10001            1)
[    0.000000] ACPI: APIC 30027C9660, 0044 (r1    SGI  APICSN2    10001            1)
[    0.000000] ACPI: SRAT 30027C96C0, 0078 (r1    SGI  SRATSN2    10001            1)
[    0.000000] ACPI: SLIT 30027C9750, 002D (r1    SGI  SLITSN2    10001            1)
[    0.000000] ACPI: FACP 30027C9820, 00F4 (r3    SGI  FACPSN2    30001            1)
[    0.000000] ACPI: DSDT 30027C97E0, 002C (r1    SGI  DSDTSN2    10001            1)
[    0.000000] ACPI: FACS 30027C9790, 0040
[    0.000000] ACPI: DSDT 30027C97E0, 002C (r1    SGI  DSDTSN2    10001            1)
[    0.000000] Number of logical nodes in system = 1
[    0.000000] Number of memory chunks in system = 1
[    0.000000] Entering add_active_range(0, 12585984, 12709888) 0 entries of 12800 used
[    0.000000] Entering add_active_range(0, 13631488, 13756927) 1 entries of 12800 used
[    0.000000] Entering add_active_range(0, 13757952, 13758296) 2 entries of 12800 used
[    0.000000] Entering add_active_range(0, 13758311, 13758340) 3 entries of 12800 used
[    0.000000] Entering add_active_range(0, 13758368, 13758377) 4 entries of 12800 used
[    0.000000] Initial ramdisk at: 0xe000003479852000 (12155808 bytes)
[    0.000000] SAL 3.2: SGI SN2 version 4.33
[    0.000000] SAL Platform features: ITC_Drift
[    0.000000] SAL: AP wakeup using external interrupt vector 0x12
[    0.000000] TR register number exceeds IA64_TR_ALLOC_MAX!IA64_TR_ALLOC_MAX should be extended
[    0.000000] ACPI: Local APIC address c0000000fee00000
[    0.000000] register_intr: No IOSAPIC for GSI 52
[    0.000000] 2 CPUs available, 2 CPUs total
[    0.000000] Increasing MCA rendezvous timeout from 20000 to 49000 milliseconds
[    0.000000] MCA related initialization done
[    0.000000] ACPI: RSDP 30027C95C0, 0024 (r2    SGI)
[    0.000000] ACPI: XSDT 30027C9600, 004C (r1    SGI  XSDTSN2    10001            1)
[    0.000000] ACPI: APIC 30027C9660, 0044 (r1    SGI  APICSN2    10001            1)
[    0.000000] ACPI: SRAT 30027C96C0, 0078 (r1    SGI  SRATSN2    10001            1)
[    0.000000] ACPI: SLIT 30027C9750, 002D (r1    SGI  SLITSN2    10001            1)
[    0.000000] ACPI: FACP 30027C9820, 00F4 (r3    SGI  FACPSN2    30001            1)
[    0.000000] ACPI: DSDT 30027C97E0, 002C (r1    SGI  DSDTSN2    10001            1)
[    0.000000] ACPI: FACS 30027C9790, 0040
[    0.000000] ACPI: DSDT 30027C97E0, 002C (r1    SGI  DSDTSN2    10001            1)
[    0.000000] SGI: Disabling VGA console
[    0.000000] SGI SAL version 4.33
[    0.000000] SAL_CAL_FLUSH failed with -1
[    0.000000] Virtual mem_map starts at 0xa0007fffd2100000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      12585984 -> 68719476736
[    0.000000]   Normal   68719476736 -> 68719476736
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[5] active PFN ranges
[    0.000000]     0: 12585984 -> 12709888
[    0.000000]     0: 13631488 -> 13756927
[    0.000000]     0: 13757952 -> 13758296
[    0.000000]     0: 13758311 -> 13758340
[    0.000000]     0: 13758368 -> 13758377
[    0.000000] On node 0 totalpages: 249725
[    0.000000]   DMA zone: 4008 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 245717 pages, LIFO batch:7
[    0.000000]   Normal zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 245717
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: BOOT_IMAGE=scsi1:/EFI/debian/vmlinuz root=/dev/md0  console=ttySG0,38400  ro
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] CPU 0: base freq=200.000MHz, ITC ratio=14/2, ITC freq=1400.000MHz
[    0.504373] Console: colour dummy device 80x25
[    0.505161] console [ttySG0] enabled
[    0.571977] Memory: 3959376k/3974192k available (5702k code, 36224k reserved, 3006k data, 784k init)
[    0.574140] Calibrating delay loop... 2097.15 BogoMIPS (lpj=4194304)
[    0.684490] Security Framework initialized
[    0.685226] SELinux:  Disabled at boot.
[    0.685898] Capability LSM initialized
[    0.686969] Dentry cache hash table entries: 524288 (order: 8, 4194304 bytes)
[    0.706702] Inode-cache hash table entries: 262144 (order: 7, 2097152 bytes)
[    0.711212] Mount-cache hash table entries: 1024
[    0.712363] Initializing cgroup subsys ns
[    0.716644] Initializing cgroup subsys cpuacct
[    0.717347] Initializing cgroup subsys devices
[    0.718284] ACPI: Core revision 20080321
[    0.719354] Boot processor id 0x0/0x0
[    0.000000] TR register number exceeds IA64_TR_ALLOC_MAX!IA64_TR_ALLOC_MAX should be extended
[    0.000000] CPU 1: base freq=200.000MHz, ITC ratio=14/2, ITC freq=1400.000MHz
[    0.749609] Brought up 2 CPUs
[    0.750224] Total of 2 processors activated (4194.30 BogoMIPS).
[    0.758363] CPU0 attaching sched-domain:
[    0.758368]  domain 0: span 0-1
[    0.758371]   groups: 0 1
[    0.758376]   domain 1: span 0-1
[    0.758378]    groups: 0-1
[    0.758383] CPU1 attaching sched-domain:
[    0.758386]  domain 0: span 0-1
[    0.758389]   groups: 1 0
[    0.758392]   domain 1: span 0-1
[    0.758395]    groups: 0-1
[    0.773285] net_namespace: 1224 bytes
[    0.773974] DMI not present or invalid.
[    0.774962] NET: Registered protocol family 16
[    0.776087] ACPI: bus type pci registered
[    0.793436] ACPI  DSDT OEM Rev 0x10001
[    0.944331] PROM version < 4.50 -- implementing old PROM flush WAR
[    0.957343] ACPI: SCI (ACPI GSI 52) not registered
[    0.958157] ACPI: EC: Look up EC in DSDT
[    0.958204] ACPI: Interpreter enabled
[    0.959257] ACPI: (supports S0)
[    0.960136] ACPI: Using IOSAPIC for interrupt routing
[    0.961507] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.987201] pnp: PnP ACPI init
[    0.987681] ACPI: bus type pnp registered
[    0.997130] pnp: PnP ACPI: found 0 devices
[    0.997789] ACPI: ACPI bus type pnp unregistered
[    1.024983] NET: Registered protocol family 2
[    1.060480] IP route cache hash table entries: 131072 (order: 6, 1048576 bytes)
[    1.075384] TCP established hash table entries: 524288 (order: 9, 8388608 bytes)
[    1.124267] TCP bind hash table entries: 65536 (order: 6, 1048576 bytes)
[    1.140395] TCP: Hash tables configured (established 524288 bind 65536)
[    1.145317] TCP reno registered
[    1.156511] NET: Registered protocol family 1
[    1.157380] checking if image is initramfs... it is
[    2.556616] Freeing initrd memory: 11856kB freed
[    2.557809] perfmon: version 2.0 IRQ 238
[    2.558475] perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits)
[    2.565155] perfmon: added sampling format default_format
[    2.577889] perfmon_default_smpl: default_format v2.0 registered
[    2.579342] audit: initializing netlink socket (disabled)
[    2.580246] type=2000 audit(1274411839.071:1): initialized
[    2.593042] Total HugeTLB memory allocated, 0
[    2.594153] VFS: Disk quotas dquot_6.5.1
[    2.605730] Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
[    2.606893] msgmni has been set to 7756
[    2.607833] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    2.635167] io scheduler noop registered
[    2.635853] io scheduler anticipatory registered
[    2.636747] io scheduler deadline registered
[    2.637661] io scheduler cfq registered (default)
[    2.665255] input: Power Button (FF) as /class/input/input0
[    2.666143] ACPI: Power Button (FF) [PWRF]
[    2.676074] input: Sleep Button (FF) as /class/input/input1
[    2.677127] ACPI: Sleep Button (FF) [SLPF]
[    2.715369] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    2.717058] sn_console: Console driver init
[    2.717820] ttySG0 at I/O 0x0 (irq = 0) is a SGI SN L1
[    2.727430] brd: module loaded
[    2.728278] mice: PS/2 mouse device common for all mice
[    2.737866] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0
[    2.754447] TCP cubic registered
[    2.754939] NET: Registered protocol family 17
[    2.765113] registered taskstats version 1
[    2.765966] rtc-efi rtc-efi: setting system clock to 2010-05-21 03:17:19 UTC (1274411839)
[    2.805048] Freeing unused kernel memory: 784kB freed
[    3.131036] tg3.c:v3.92.1 (June 9, 2008)
[    3.131950] ACPI: Unable to derive IRQ for device 0001:01:04.0
[    3.137728] ACPI: PCI Interrupt 0001:01:04.0[A]: no GSI
[    3.166281] SCSI subsystem initialized
[    3.214918] QLogic Fibre Channel HBA Driver: 8.02.01-k4
[    4.509164] eth0: Tigon3 [partno(030-1771-000) rev 0105 PHY(5701)] (PCI:66MHz:64-bit) 10/100/1000Base-T Ethernet 08:00:69:13:fc:c9
[    4.511222] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[0]
[    4.512573] eth0: dma_rwctrl[76ff3f0f] dma_mask[64-bit]
[    4.513783] ACPI: Unable to derive IRQ for device 0001:01:01.0
[    4.536964] ACPI: PCI Interrupt 0001:01:01.0[A]: no GSI
[    4.538080] IOC4 0001:01:01.0: IO9 card detected.
[    4.796599] IOC4 0001:01:01.0: PCI clock is 15 ns.
[    4.796645] qla1280: QLA12160 found on PCI bus 1, dev 3
[    4.797672] ACPI: Unable to derive IRQ for device 0001:01:03.0
[    4.798712] ACPI: PCI Interrupt 0001:01:03.0[A]: no GSI
[    4.799714] scsi(0): Enabling SN2 PCI DMA dual channel lockup workaround
[    4.814550] scsi(0): Enabling SN2 PCI DMA workaround
[    4.834484] scsi(0:0): Resetting SCSI BUS
[    9.840347] scsi(0:1): Resetting SCSI BUS
[   14.844350] scsi0 : QLogic QLA12160 PCI to SCSI Host Adapter
[   14.844352]        Firmware version: 10.04.42, Driver version 3.26
[   14.846965] ACPI: Unable to derive IRQ for device 0002:01:02.0
[   14.859302] ACPI: PCI Interrupt 0002:01:02.0[A]: no GSI
[   14.860569] qla2xxx 0002:01:02.0: Found an ISP2200, irq 60, iobase 0xc00000080fe00000
[   14.873898] qla2xxx 0002:01:02.0: Configuring PCI space...
[   14.875280] qla2xxx 0002:01:02.0: Configure NVRAM parameters...
[   15.009693] qla2xxx 0002:01:02.0: Verifying loaded RISC code...
[   15.027673] firmware: requesting ql2200_fw.bin
[   15.098003] scsi 0:0:1:0: Direct-Access     FUJITSU  MAN3735MC        0111 PQ: 0 ANSI: 3
[   15.099765] scsi(0:0:1:0): Sync: period 9, offset 14, Wide, DT, Tagged queuing: depth 31
[   15.108256] scsi 0:0:2:0: Direct-Access     FUJITSU  MAN3735MC        0111 PQ: 0 ANSI: 3
[   15.121536] scsi(0:0:2:0): Sync: period 9, offset 14, Wide, DT, Tagged queuing: depth 31
[   21.915808] Driver 'sd' needs updating - please use bus_type methods
[   21.919699] sd 0:0:1:0: [sda] 143550456 512-byte hardware sectors (73498 MB)
[   21.934435] sd 0:0:1:0: [sda] Write Protect is off
[   21.935233] sd 0:0:1:0: [sda] Mode Sense: ab 00 00 08
[   21.936524] sd 0:0:1:0: [sda] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
[   21.942366] sd 0:0:1:0: [sda] 143550456 512-byte hardware sectors (73498 MB)
[   21.960252] sd 0:0:1:0: [sda] Write Protect is off
[   21.961062] sd 0:0:1:0: [sda] Mode Sense: ab 00 00 08
[   21.962342] sd 0:0:1:0: [sda] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
[   21.966595]  sda: sda1 sda2 sda3
[   22.016875] sd 0:0:1:0: [sda] Attached SCSI disk
[   22.020737] sd 0:0:2:0: [sdb] 143550456 512-byte hardware sectors (73498 MB)
[   22.037533] sd 0:0:2:0: [sdb] Write Protect is off
[   22.038390] sd 0:0:2:0: [sdb] Mode Sense: ab 00 00 08
[   22.039650] sd 0:0:2:0: [sdb] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
[   22.044512] sd 0:0:2:0: [sdb] 143550456 512-byte hardware sectors (73498 MB)
[   22.063292] sd 0:0:2:0: [sdb] Write Protect is off
[   22.064162] sd 0:0:2:0: [sdb] Mode Sense: ab 00 00 08
[   22.065420] sd 0:0:2:0: [sdb] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
[   22.070387]  sdb: sdb1 sdb2 sdb3
[   22.120647] sd 0:0:2:0: [sdb] Attached SCSI disk
[   25.711686] qla2xxx 0002:01:02.0: Allocated (252 KB) for firmware dump...
[   25.875724] scsi1 : qla2xxx
[   25.876506] qla2xxx 0002:01:02.0:
[   25.876508]  QLogic Fibre Channel HBA Driver: 8.02.01-k4
[   25.876509]   QLogic QLA22xx -
[   25.876510]   ISP2200: PCI (66 MHz) @ 0002:01:02.0 hdma+, host#=1, fw=2.02.08 TP
[   25.944630] scsi: waiting for bus probes to complete ...
[   30.914291] md: raid1 personality registered for level 1
[   30.926333] md: md0 stopped.
[   31.151021] md: bind<sdb2>
[   31.157497] md: bind<sda2>
[   31.158053] md: md0: raid array is not clean -- starting background reconstruction
[   31.184565] raid1: raid set md0 active with 2 out of 2 mirrors
[   31.513214] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[   31.515404] SGI XFS Quota Management subsystem
[   31.521541] Filesystem "md0": Disabling barriers, not supported by the underlying device
[   31.534528] XFS mounting filesystem md0
[   31.833792] md: resync of RAID array md0
[   31.834423] md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
[   31.835559] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[   31.837306] md: using 512k window, over a total of 63476480 blocks.
[   31.888089] Starting XFS recovery on filesystem: md0 (logdev: internal)
[   32.346185] Ending XFS recovery on filesystem: md0 (logdev: internal)
[   33.948695] udevd version 125 started
[   35.650221] Adding 8200928k swap on /dev/sda3.  Priority:-1 extents:1 across:8200928k
[   35.684526] Adding 8200928k swap on /dev/sdb3.  Priority:-2 extents:1 across:8200928k
[   35.756618] Filesystem "md0": Disabling barriers, not supported by the underlying device
[   36.787835] loop: module loaded
[   36.854002] Fusion MPT base driver 3.04.06
[   36.854792] Copyright (c) 1999-2007 LSI Corporation
[   36.941050] Uniform Multi-Platform E-IDE driver
[   36.941909] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   36.976642] SGIIOC4: IDE controller at PCI slot 0001:01:01.0, revision 79
[   36.977916] ide0: BM-DMA at 0xc00000080f200140-0xc00000080f200163
[   36.979056] Probing IDE interface ide0...
[   37.712861] hda: MATSHITADVD-ROM SR-8177, ATAPI CD/DVD-ROM drive
[   38.048397] hda: MWDMA2 mode selected
[   38.049359] ide0 at 0xc00000080f200100-0xc00000080f20011c,0xc00000080f200120 on irq 61
[   38.245733] hda: ATAPI 24X DVD-ROM drive, 256kB Cache
[   38.249926] Uniform CD-ROM driver Revision: 3.20
[   40.679276] tg3: eth0: Link is up at 100 Mbps, full duplex.
[   40.680373] tg3: eth0: Flow control is off for TX and off for RX.
[   41.301977] NET: Registered protocol family 10
[   41.303409] lo: Disabled Privacy Extensions
[   48.118002] qla2xxx 0002:01:02.0: Cable is unplugged...
[   51.316343] eth0: no IPv6 routers present


oh, and of course some pictures :)

Attachment:
CIMG0599.JPG
CIMG0599.JPG [ 2.4 MiB | Viewed 828 times ]

Attachment:
CIMG0600.JPG
CIMG0600.JPG [ 2.23 MiB | Viewed 828 times ]

Attachment:
CIMG0603.JPG
CIMG0603.JPG [ 3.09 MiB | Viewed 828 times ]

Attachment:
CIMG0606.JPG
CIMG0606.JPG [ 2.18 MiB | Viewed 828 times ]

Attachment:
CIMG0607.JPG
CIMG0607.JPG [ 2.05 MiB | Viewed 828 times ]

Attachment:
CIMG0609.JPG
CIMG0609.JPG [ 1.67 MiB | Viewed 828 times ]

_________________
:Onyx2R: :O3x06R: :ChallengeL: :Onyx: :O2000: :PI: :Octane: :1600SW: :1600SW: :Indigo2IMP: :A350: :Indy: :Indy: :Indy: (4x Challenge S)


Top
 Profile  
 
Unread postPosted: Thu May 20, 2010 8:01 pm 
Offline
User avatar

Joined: Mon Sep 12, 2005 7:32 pm
Posts: 352
Location: New York, USA
Oh, and here's some more info:

env:

Code:
Environmental monitoring is enabled and running.

Description    State       Warning Limits     Fault Limits       Current
-------------- ----------  -----------------  -----------------  -------
          1.8V    Enabled  10%   1.62/  1.98  20%   1.44/  2.16    1.777
           12V <not present>
           12V    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.000
        12V IO    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.000
          3.3V    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.302
        5V AUX    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.044
      3.3V AUX    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.302
    PCI 12V IO    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.000
      PCI 3.3V    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.320
       PCI 2.5    Enabled  10%   2.25/  2.75  20%   2.00/  3.00    2.509
        PCI 5V    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    4.940
    PCI 5V AUX    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.044
      NODE 12V    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.012
     NODE 2.5V    Enabled  10%   2.25/  2.75  20%   2.00/  3.00    2.487
    NODE 1.85V    Enabled  10%   1.67/  2.04  20%   1.48/  2.22    1.852
     NODE 1.2V    Enabled  10%   1.08/  1.32  20%   0.96/  1.44    1.204
    NODE 1.25V    Enabled  10%   1.13/  1.38  20%   1.00/  1.50    1.246
 NODE 3.3V AUX    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.304

Description     State       Warning RPM  Current RPM
--------------- ----------  -----------  -----------
FAN  0  EXHST 1    Enabled         1980         2295
FAN  1  EXHST 2    Enabled         1980         2265
FAN  2       PS    Enabled         3200         3970
FAN  3    PCI 1    Enabled         1980         2576
FAN  4    PCI 2    Enabled         1980         2860
FAN  5 CPU 0A 1 <not present>
FAN  6 CPU 0A 2 <not present>
FAN  7 CPU 0C 1 <not present>
FAN  8 CPU 0C 2 <not present>

                              Advisory   Critical   Fault      Current     
Description       State       Temp       Temp       Temp       Temp       
----------------- ----------  ---------  ---------  ---------  --------- 
 0 INTERFACE 0       Enabled   30C/ 86F   45C/113F   50C/122F   13C/ 55F
 1 INTERFACE 1       Enabled   30C/ 86F   45C/113F   50C/122F   14C/ 57F
 2 INTERFACE 2       Enabled   30C/ 86F   45C/113F   50C/122F   12C/ 53F
 3 PCI RISER         Enabled   30C/ 86F   45C/113F   50C/122F   19C/ 66F
 4 NODE MON 0        Enabled   30C/ 86F   45C/113F   50C/122F    7C/ 44F
 5 NODE MON 1        Enabled   30C/ 86F   45C/113F   50C/122F   10C/ 50F
 6 CPU 0A            Enabled   90C/194F  100C/212F  105C/221F   66C/150F
 7 CPU 0C            Enabled   90C/194F  100C/212F  105C/221F   65C/149F


serial all:

Code:
Data                            Location      Value
------------------------------  ------------  --------
Local System Serial Number      NVRAM         R2001162
Reference System Serial Number  NVRAM         R2001162
Local Brick Serial Number       EEPROM        NGL538
Reference Brick Serial Number   NVRAM         NGL538


EEPROM      Product Name    Serial         Part Number           Rev  T/W   
----------  --------------  -------------  --------------------  ---  ------
INTERFACE   IPF_2UINT       NGL538         030_1954_004          A    00   
NODE        IP57            NCT453         030_1951_005          A    00   
RISER       2U_RISER        NHT152         030_1808_006          B    00   
IO9         IO9             NJJ744         030_1771_005          A    00   
PS 1        no hardware detected
PS 2        DPS-500EBE      XPD0351005656  060-0178-003          S4

EEPROM         Part Number  Serial Number     Stepping  Core Speed  Cache
----------     -----------  ----------------  --------  ----------  -------
CPU 0A           80543KC    0001f2ae3cbd13ee     5       1400 MHz   3072 KB
CPU 0C           80543KC    00004f4256b9a86a     5       1400 MHz   3072 KB

EEPROM     JEDEC-SPD Info           Part Number        Rev  Speed  SGI      BC
---------- ------------------------ ------------------ ---- ------ -------- --
DIMM0 L    7F910000000000005A1A0005          DTP63703A  A     6.0  09/22/04 00
DIMM1 L    CE0000000000000008021F37 M3 12L6423ETS-CB3   SE    6.0  09/22/04 00
DIMM2 L    CE000000000000000302BB0F M3 12L6423ETS-CB3   SE    6.0  09/16/04 00
DIMM3 L    7F98000000000000510D3C30 128Mx72D333C25 REG 0031   6.0  NO DATA
DIMM4 L    no hardware detected
DIMM5 L    no hardware detected
DIMM0 R    7F91000000000000521A0005          DTP63703A  A     6.0  09/22/04 00
DIMM1 R    CE0000000000000008031F38 M3 12L6423ETS-CB3   SE    6.0  09/22/04 00
DIMM2 R    CE000000000000000306BA66 M3 12L6423ETS-CB3   SE    6.0  09/16/04 00
DIMM3 R    7F98000000000000530D3B30 128Mx72D333C25 REG 0031   6.0  NO DATA
DIMM4 R    no hardware detected
DIMM5 R    no hardware detected


_________________
:Onyx2R: :O3x06R: :ChallengeL: :Onyx: :O2000: :PI: :Octane: :1600SW: :1600SW: :Indigo2IMP: :A350: :Indy: :Indy: :Indy: (4x Challenge S)


Top
 Profile  
 
Unread postPosted: Fri May 21, 2010 5:25 am 
Offline
Moderator
Moderator
User avatar

Joined: Sun Jun 06, 2004 4:55 pm
Posts: 5205
Location: NC - USA
Thanks for the post - makes for an interesting comparison with the Origin 350.

The only A350 I got a fairly close look at didn't have the XIO2 slot on the back side of the PCI riser. Did your A350 come with that riser and IO9, or did you add them?

In any case, since your does have the XIO2 slot, you might consider trying a Fuel V10 in there <ala the O350 IP hack>. Issues of <the lack of> open source OS support for Odyssey graphics aside, it'd be the ultimate SGI hybrid system - kind of a Prism in reverse. ;) <and if they work having graphics would be a decent fringe benefit>.

It looks like there room for the uncut VPro heatsink, so testing a Fuel V10 might not involve much more than temporarily removing the VPro bulkhead and one radial fan from the Altix - not much more effort than trying a PCI graphics board.

The XIO slot doesn't appear in the env output of the Altix, but I doubt that they included the slot with out hardwiring the voltage lines in the riser PCB <not to mention it's probably a carryover from the O350 with an identical part number>.

_________________
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************


Top
 Profile  
 
Unread postPosted: Fri May 21, 2010 7:51 am 
Offline
User avatar

Joined: Sat Jun 28, 2008 10:08 am
Posts: 669
Location: Boulder, CO
recondas wrote:
In any case, since your does have the XIO2 slot, you might consider trying a Fuel V10 in there <ala the O350 IP hack>. Issues of <the lack of> open source OS support for Odyssey graphics aside, it'd be the ultimate SGI hybrid system - kind of a Prism in reverse. ;) <and if they work having graphics would be a decent fringe benefit>.


There was never proper XIO support on Linux as far as I know - there was hacky support in MIPS-Linux board support files, but I don't think their universal XIO API ever landed.

Thus, I highly doubt that's possible - it might be fun to throw a card in and see what happens though (I suspect it'll be nothing).

_________________
:0300: <> :0300: :Indy: :1600SW: :1600SW:


Top
 Profile  
 
Unread postPosted: Fri May 21, 2010 2:56 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sun Jun 06, 2004 4:55 pm
Posts: 5205
Location: NC - USA
bri3d wrote:
There was never proper XIO support on Linux as far as I know - there was hacky support in MIPS-Linux board support files, but I don't think their universal XIO API ever landed. Thus, I highly doubt that's possible - it might be fun to throw a card in and see what happens though (I suspect it'll be nothing).
Yeah - thats why I mentioned the lack of open source support - though it looks like OpenBSD 4.7 has limited console-level Odyssey support:
OpenBSD.org wrote:
The odyssey driver provides support for the VPro (aka Odyssey) graphics card, which can be found in SGI Octane, Octane2, Fuel, Tezro and Onyx systems. Console support is provided by the wscons(4) console framework.

If it were mine to play with I'd still have to try it though. :D

_________________
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************


Top
 Profile  
 
Unread postPosted: Fri May 21, 2010 9:57 pm 
Offline
User avatar

Joined: Sat Jun 28, 2008 10:08 am
Posts: 669
Location: Boulder, CO
recondas wrote:
Yeah - thats why I mentioned the lack of open source support - though it looks like OpenBSD 4.7 has limited console-level Odyssey support:
OpenBSD.org wrote:
The odyssey driver provides support for the VPro (aka Odyssey) graphics card, which can be found in SGI Octane, Octane2, Fuel, Tezro and Onyx systems. Console support is provided by the wscons(4) console framework.


Linux drivers were written as well (I believe the OpenBSD drivers were based on the Linux reverse-engineering efforts), but they didn't land anywhere (they live only in a patch at http://www.linux-mips.org/~skylark/ ) because the real XIO API never landed, as far as I know.

I doubt the SAL+EFI knows enough to understand enough to bring it up - it would be funny if SGI managed to copy and paste enough of ARCS PROM into SAL to accidentally bring something up though.

_________________
:0300: <> :0300: :Indy: :1600SW: :1600SW:


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group