Nekochan Net

Official Chat Channel: #nekochan // irc.nekochan.net
It is currently Fri Sep 19, 2014 5:50 am

All times are UTC - 8 hours


Forum rules


Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.



Post new topic Reply to topic  [ 18 posts ]  Go to page 1, 2  Next
Author Message
Unread postPosted: Sat Jul 18, 2009 8:38 am 
Offline
User avatar

Joined: Wed Mar 26, 2008 11:04 am
Posts: 315
Location: Paris
Another hacked Origin 350 (was originally an Onyx 350).
Code:
julien@franky 18:30 /usr/people/julien > hinv -mv
Location: /hw/module/001c01/node
       IP53_2CPU Board: barcode MXL646     part 030-1869-001 rev -C
Location: /hw/module/001c01/IXbrick/xtalk/12
       ASTODYV10 Board: barcode NEV602     part 030-1826-002 rev -A
Location: /hw/module/001c01/IXbrick/xtalk/15
       2U_INT_53 Board: barcode MYW292     part 030-1809-003 rev -B
Location: /hw/module/001c01/IXbrick/xtalk/15/pci-x/0/1/ioc4
             IO9 Board: barcode MTF284     part 030-1771-005 rev -A
2 700 MHZ IP35 Processors
CPU: MIPS R16000 Processor Chip Revision: 2.1
FPU: MIPS R16010 Floating Point Chip Revision: 2.1
CPU 0 at Module 001c01/Slot 0/Slice A: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
CPU 1 at Module 001c01/Slot 0/Slice C: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xc
Main memory size: 4096 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 001c01/Slot 0: 4096 MB (enabled)
  Bank 0 contains 512 MB (Premium) DIMMS (enabled)
  Bank 1 contains 512 MB (Premium) DIMMS (enabled)
  Bank 2 contains 512 MB (Premium) DIMMS (enabled)
  Bank 3 contains 512 MB (Premium) DIMMS (enabled)
  Bank 4 contains 512 MB (Premium) DIMMS (enabled)
  Bank 5 contains 512 MB (Premium) DIMMS (enabled)
  Bank 6 contains 512 MB (Premium) DIMMS (enabled)
  Bank 7 contains 512 MB (Premium) DIMMS (enabled)
Integral SCSI controller 2: Version IDE (ATA/ATAPI) IOC4
  CDROM: unit 0 on SCSI controller 2
Integral SCSI controller 3: Version Fibre Channel QL2200A, 66 MHz PCI
Integral SCSI controller 0: Version QL12160, low voltage differential
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL12160, low voltage differential
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3/IOC4 serial port: tty5
IOC3/IOC4 serial port: tty6
Graphics board: V10
Integral Gigabit Ethernet: tg0, module 001c01, PCI bus 1 slot 4
Iris Audio Processor: version MAD revision 1, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x100a) PCI slot 1
  PCI Adapter ID (vendor 0x1077, device 0x2200) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 3
  PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 4
  PCI Adapter ID (vendor 0x1412, device 0x1724) PCI slot 1
  PCI Adapter ID (vendor 0x1033, device 0x0035) PCI slot 2
  PCI Adapter ID (vendor 0x1033, device 0x0035) PCI slot 2
  PCI Adapter ID (vendor 0x1033, device 0x00e0) PCI slot 2
IOC4 firmware revision 79
IOC3/IOC4 external interrupts: 1
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c01/Slot n0: Revision 6.210
USB controller: type OHCI
USB Human Interface Device: device id 0 type mouse
USB controller: type OHCI
USB Human Interface Device: device id 0 type keyboard

Code:
julien@franky 18:31 /usr/people/julien > /usr/gfx/gfxinfo
Graphics board 0 is "ODYSSEY" graphics.
        Managed (":0.0") 1280x1024
        BUZZ version B.2
        PB&J version 1
        32MB memory
                Banks: 2, CAS latency: 3
        Compositor port 1 attached to channel 0 nic 0x1004a768
         Monitor 0 type: PHL 2095
        Channel 0:
         Origin = (0,0)
         Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60)

Code:
julien@franky 18:31 /usr/people/julien > l1cmd env
Environmental monitoring is enabled and running.

Description    State       Warning Limits     Fault Limits       Current
-------------- ----------  -----------------  -----------------  -------
          1.8V    Enabled  10%   1.62/  1.98  20%   1.44/  2.16    1.79
           12V    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.06
           12V    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.06
          3.3V    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.34
        12V IO    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.06
        5V aux    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.07
      3.3V aux    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.25
        5V aux    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.07
          3.3V    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.34
          2.5V    Enabled  10%   2.25/  2.75  20%   2.00/  3.00    2.51
            5V    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    4.94
  XIO 12V bias    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   11.94
        XIO 5V    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    4.91
      XIO 2.5V    Enabled  10%   2.25/  2.75  20%   2.00/  3.00    2.46
  XIO 3.3V aux    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.29
NODE0 3.3V aux    Enabled  10%   2.97/  3.63  20%   2.64/  3.96    3.27
  NODE0 5V aux    Enabled  10%   4.50/  5.50  20%   4.00/  6.00    5.10
     NODE0 12V    Enabled  10%  10.80/ 13.20  20%   9.60/ 14.40   12.06
     NODE0 CPU    Enabled  10%   1.13/  1.38  20%   1.00/  1.50    1.27
    NODE0 SRAM    Enabled  10%   2.25/  2.75  20%   2.00/  3.00    2.48
    NODE0 1.5V    Enabled  10%   1.35/  1.65  20%   1.20/  1.80    1.49

Description    State       Warning RPM  Current RPM
-------------- ----------  -----------  -----------
FAN 0  EXHST 1    Enabled         2160         2311
FAN 1       PS    Enabled         1800         2163
FAN 2    PCI 1    Enabled         2160         2327
FAN 3    PCI 2    Enabled         2160         2596
FAN 4      ODY    Enabled         1679         4383

                              Advisory   Critical   Fault      Current
Description       State       Temp       Temp       Temp       Temp       
----------------- ----------  ---------  ---------  ---------  --------- 
 0 INTERFACE 0       Enabled    [Autofan Control]    75C/167F   39C/102F
 1 INTERFACE 1       Enabled    [Autofan Control]    75C/167F   36C/ 96F
 2 INTERFACE 2       Enabled    [Autofan Control]    75C/167F   31C/ 87F
 3 PCI RISER         Enabled    [Autofan Control]    75C/167F   28C/ 82F
 4 ODYSSEY           Enabled    [Autofan Control]    75C/167F   31C/ 87F
 5 NODE              Enabled    [Autofan Control]    75C/167F   31C/ 87F
 6 BEDROCK           Enabled    [Autofan Control]    75C/167F   36C/ 96F

                     Zone Temp     Target    Current   Zone Fan   Curr/Min
Zone Name  State     Sensors       Average   Average   Index      Fan %
---------  --------  ------------  --------  --------  ---------  ---------
NODE        Enabled     0,1,2,5,6  47C/116F  34C/ 93F          0   18%/ 18%
PS          Enabled     0,1,2,5,6  47C/116F  34C/ 93F          1   55%/ 55%
PCI         Enabled             3  45C/113F  28C/ 82F        2,3   55%/ 55%
ODY         Enabled             4  48C/118F  31C/ 87F          4   55%/ 55%


Attachments:
18072009150.jpg
18072009150.jpg [ 809.55 KiB | Viewed 855 times ]
DSC03967.JPG
DSC03967.JPG [ 1.06 MiB | Viewed 855 times ]
18072009144.jpg
18072009144.jpg [ 949.08 KiB | Viewed 855 times ]

_________________
:Onyx2: :O2: :O3x0: :O3x0:
Top
 Profile  
 
Unread postPosted: Sat Jul 18, 2009 10:31 am 
Offline
Moderator
Moderator
User avatar

Joined: Sun Jun 06, 2004 4:55 pm
Posts: 5205
Location: NC - USA
I like how you reprogrammed the L1 display to get Franky to "say" his/her name. And it looks like your fan mod is keeping Franky very cool.

So tell us the story behind naming your Onyx 350 Franky. :D

_________________
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************


Top
 Profile  
 
Unread postPosted: Sat Jul 18, 2009 10:55 am 
Offline
User avatar

Joined: Wed Mar 26, 2008 11:04 am
Posts: 315
Location: Paris
recondas wrote:
So tell us the story behind naming your Onyx 350 Franky. :D

Well, the naming rule of my machines is that they all finish by the "y" letter, and describe their personnality / history... This one is called "Franky" as a reference to frankenstein, as it's a quite much hacked machine... It could even more deserve this name if it evolves by connecting a quad cpu O300 (but I would prefer connecting a second O350, to give it dual head :))

_________________
:Onyx2: :O2: :O3x0: :O3x0:


Top
 Profile  
 
Unread postPosted: Sun Oct 18, 2009 5:58 pm 
Offline

Joined: Wed Mar 11, 2009 7:17 pm
Posts: 337
Location: NYC
Hi, where did you manage to find the onyx350 cover to replace the original origin350 cover?


Top
 Profile  
 
Unread postPosted: Sun Oct 18, 2009 7:57 pm 
Offline
User avatar

Joined: Sat Jun 28, 2008 10:08 am
Posts: 669
Location: Boulder, CO
shadowless wrote:
Hi, where did you manage to find the onyx350 cover to replace the original origin350 cover?


Parent post says it started life as an Onyx 350, presumably originally with a G-Brick or V-Brick, so the machine either went from Onyx350 Infinite Reality to Onyx350 Infinite Performance or just from external VPro to internal VPro.

_________________
:0300: <> :0300: :Indy: :1600SW: :1600SW:


Top
 Profile  
 
Unread postPosted: Sun Oct 18, 2009 11:26 pm 
Offline
User avatar

Joined: Wed Mar 26, 2008 11:04 am
Posts: 315
Location: Paris
Yeah, I got it that way so, as bri3d says, it probably started its life with a G-Brick or V-Brick connected (and another 2x700 compute module).
Here are a few pics of the final setup.


Attachments:
File comment: 22U short rack with my toys
DSC04482.JPG
DSC04482.JPG [ 1.38 MiB | Viewed 729 times ]
File comment: cobalt raq3, Onyx IP, Origin 300
DSC04487.JPG
DSC04487.JPG [ 1.02 MiB | Viewed 729 times ]
File comment: the TP9100 aka D-Brick
DSC04489.JPG
DSC04489.JPG [ 1.21 MiB | Viewed 729 times ]

_________________
:Onyx2: :O2: :O3x0: :O3x0:
Top
 Profile  
 
Unread postPosted: Mon Oct 19, 2009 6:07 am 
Offline

Joined: Wed Mar 11, 2009 7:17 pm
Posts: 337
Location: NYC
bplaa.yai wrote:
Another hacked Origin 350 (was originally an Onyx 350).


For a moment i thought this was a typo. So the hack was connecting origin300 to a onyx350?


Top
 Profile  
 
Unread postPosted: Mon Oct 19, 2009 6:17 am 
Offline
User avatar

Joined: Wed Mar 26, 2008 11:04 am
Posts: 315
Location: Paris
shadowless wrote:
bplaa.yai wrote:
Another hacked Origin 350 (was originally an Onyx 350).

For a moment i thought this was a typo. So the hack was connecting origin300 to a onyx350?

Nope, the machines you see in the pictures are not connected, and totally unrelated to each other. The hack I'm refering to is the Origin 350 -> Onyx IP conversion.

_________________
:Onyx2: :O2: :O3x0: :O3x0:


Top
 Profile  
 
Unread postPosted: Mon Oct 19, 2009 6:30 am 
Offline

Joined: Wed Mar 11, 2009 7:17 pm
Posts: 337
Location: NYC
In reference to 18072009150.jpg, it was an onyx to begin with or the cover of the origin 350 was replaced?


Top
 Profile  
 
Unread postPosted: Mon Oct 19, 2009 7:50 am 
Offline
Moderator
Moderator
User avatar

Joined: Sun Jun 06, 2004 4:55 pm
Posts: 5205
Location: NC - USA
shadowless wrote:
In reference to 18072009150.jpg, it was an onyx to begin with or the cover of the origin 350 was replaced?

:D It left the factory as an Onyx 350. As mentioned, without VPro graphics in the internal XIO(2) slot, so it was probably connected to external graphics, like a G-Brick <another valid Onyx 350 configuration>. So yes, it was an Onyx 350 to begin with, and no, the cover was not replaced.

_________________
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************


Top
 Profile  
 
Unread postPosted: Mon Oct 19, 2009 9:21 am 
Offline
User avatar

Joined: Thu May 14, 2009 9:31 am
Posts: 504
Location: Huntsville, Alabama, USA
shadowless wrote:
bplaa.yai wrote:
Another hacked Origin 350 (was originally an Onyx 350).


For a moment i thought this was a typo. So the hack was connecting origin300 to a onyx350?

That hack is one I'm working on, however. :D

_________________
:O3000: :1600SW: :Indigo2IMP: :0300:

"Remember, if they can't find you handsome, they should at least find you handy."


Top
 Profile  
 
Unread postPosted: Mon Oct 19, 2009 10:30 am 
Offline

Joined: Wed Mar 11, 2009 7:17 pm
Posts: 337
Location: NYC
recondas wrote:
shadowless wrote:
In reference to 18072009150.jpg, it was an onyx to begin with or the cover of the origin 350 was replaced?

:D It left the factory as an Onyx 350. As mentioned, without VPro graphics in the internal XIO(2) slot, so it was probably connected to external graphics, like a G-Brick <another valid Onyx 350 configuration>. So yes, it was an Onyx 350 to begin with, and no, the cover was not replaced.


That clears things up :) Got lost in all the onyx350 to origin350 hack stuff. Thought there is a possible source for onyx350 faceplates.

Wasn't there a hack to connect a o2k to o3xx mentioned before?


Top
 Profile  
 
Unread postPosted: Mon Oct 19, 2009 10:46 am 
Offline
User avatar

Joined: Tue Dec 09, 2008 10:30 am
Posts: 131
Location: Sherbrooke, Quebec
o2k to o3xx ?

Isn't that like two different craylink systems, and incompatible between them?

_________________
:Octane: 270Mhz SI 384Mb ram :Octane2: 2x360Mhz V6 1.5Gb ram
:O2000: Death by flooding... :(
Amiga A3000D / Full ECS, Kickstart 3.1, 2Mb CHIP/24Mb FAST with 2+18Gb SCSI HD
Amiga A1200 starting to work on this one.


Top
 Profile  
 
Unread postPosted: Mon Oct 19, 2009 10:55 am 
Offline
User avatar

Joined: Thu May 14, 2009 9:31 am
Posts: 504
Location: Huntsville, Alabama, USA
henrycault wrote:
o2k to o3xx ?

Isn't that like two different craylink systems, and incompatible between them?

Yeah, that's what I thought too.

Now o3x0 to o3x00 might be doable, if serial number security can somehow be thwarted. I know that they do negotiate a valid link over the NUMAlink ports, right up until the L1s go "wtf these serial numbers dont match!!".

Hey, I never tried connecting an I-brick to an o300 over XIO... I'll try that after lunch and post back.

_________________
:O3000: :1600SW: :Indigo2IMP: :0300:

"Remember, if they can't find you handsome, they should at least find you handy."


Top
 Profile  
 
Unread postPosted: Mon Oct 19, 2009 11:25 am 
Offline

Joined: Wed Mar 11, 2009 7:17 pm
Posts: 337
Location: NYC
viewtopic.php?f=14&t=12843&

Probably no a o2k


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 18 posts ]  Go to page 1, 2  Next

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group