Nekochan Net

Official Chat Channel: #nekochan // irc.nekochan.net
It is currently Fri Aug 01, 2014 10:34 pm

All times are UTC - 8 hours


Forum rules


Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.



Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Rackmount Onyx2 [1 of 8]
Unread postPosted: Tue Jul 28, 2009 12:32 am 
Offline
User avatar

Joined: Thu Jun 17, 2004 10:35 am
Posts: 3830
Location: Wijchen, The Netherlands
Attachment:
Picture 016 (Medium).jpg
Picture 016 (Medium).jpg [ 53.11 KiB | Viewed 2112 times ]

Code:
# hinv -mv
Location: /hw/module/1/slot/n2/node
     IP31PIMM8MB Board: barcode JRX698     part 030-1401-002 rev  B
            IP31 Board: barcode JRP075     part 030-1255-004 rev  A
Location: /hw/module/1/slot/n1/node
        MODULEID Board: barcode K0021861   part              rev   
            IP31 Board: barcode JRP763     part 030-1255-004 rev  A
      4P1G5_MPLN Board: barcode JHF872     part 030-1066-002 rev  L
     IP31PIMM8MB Board: barcode JRX807     part 030-1401-002 rev  B
Location: /hw/module/1/slot/io4/kona
          GE16-4 Board: barcode KFZ433     part 030-1398-001 rev  E
Location: /hw/module/1/slot/io1/baseio
             MIO Board: barcode GTR385     part 030-0880-003 rev  G
          BASEIO Board: barcode GSM513     part 030-0734-002 rev  N
4 300 MHZ IP27 Processors
CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 2.3
CPU 0 at Module 1/Slot 2/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
CPU 1 at Module 1/Slot 2/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
CPU 2 at Module 1/Slot 1/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
CPU 3 at Module 1/Slot 1/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
Main memory size: 4096 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 8 Mbytes
Memory at Module 1/Slot 82: 2048 MB (enabled)
  Bank 0 contains 512 MB (Standard) DIMMS (enabled)
  Bank 1 contains 512 MB (Standard) DIMMS (enabled)
  Bank 2 contains 512 MB (Standard) DIMMS (enabled)
  Bank 3 contains 512 MB (Standard) DIMMS (enabled)
Memory at Module 1/Slot 81: 2048 MB (enabled)
  Bank 0 contains 512 MB (Standard) DIMMS (enabled)
  Bank 1 contains 512 MB (Standard) DIMMS (enabled)
  Bank 2 contains 512 MB (Standard) DIMMS (enabled)
  Bank 3 contains 512 MB (Standard) DIMMS (enabled)
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  CDROM: unit 6 on SCSI controller 0
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3 parallel port: plp1
Graphics board: InfiniteReality2E
Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2
Iris Audio Processor: version RAD revision 7.0, number 1
Origin BASEIO board, module 1 slot 1: Revision 3
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 6
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 7
IOC3/IOC4 external interrupts: 1
HUB in Module 1/Slot 2: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 1/Slot 1: Revision 5 Speed 100.00 Mhz (enabled)
IP27prom in Module 1/Slot n2: Revision 6.156
IP27prom in Module 1/Slot n1: Revision 6.156
IO6prom on Global Master Baseio in Module 1/Slot io2: Revision 6.156


Code:
# /usr/gfx/gfxinfo -v
Graphics board 0 is "KONAL" graphics.
        Managed (":0.0") 1280x1024
        Display has 2 channels
        4 GEs (of 4), occmask = 0x0f
        4MB external BEF ram, 32bit path
        2 RM9 boards (of 2) 1/1/0/0
        Texture Memory: 64MB/64MB/-/-
        Medium pixel depth
        32K cmap
        GVO option detected
        brd: 80f61806 3020c06/3020c06/-/- f9311002
         ge: 0 14832057 24731057 14231057
        rm0: 15032057 15431057
              4631057 2/2/2/2
              4d31057 2/2/2/2/2/2/2/2
              4938057 5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5
        rm1: 15032057 15431057
              4631057 2/2/2/2
              4d31057 2/2/2/2/2/2/2/2
              4938057 5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5
         dg: 05532057
              5838057 1/1/1/1
              5631057 1/1
        GE:   NIC #:      0000.0047.172e (family: 0b)
              Serial #:   KFZ433
              Part #:     030-1398-001
        KT:   No NIC serial number available.
        RM0:  NIC #:      0000.0034.a8bc (family: 0b)
              Serial #:   JGN030
              Part #:     030-1402-001
        TM0:  NIC #:      0000.0034.4782 (family: 0b)
              Serial #:   JGN148
              Part #:     030-1053-001
        RM1:  NIC #:      0000.0030.7e8f (family: 0b)
              Serial #:   JGE829
              Part #:     030-1402-001
        TM1:  NIC #:      0000.002f.f4fa (family: 0b)
              Serial #:   JDN990
              Part #:     030-1053-001
        RM2:  No NIC serial number available.
        TM2:  No NIC serial number available.
        RM3:  No NIC serial number available.
        TM3:  No NIC serial number available.
        BP:   No NIC serial number available.
        DG:   NIC #:      0000.0047.230b (family: 0b)
              Serial #:   KCT697
              Part #:     030-1242-001
        DGOPT:NIC #:      0000.0047.2c7d (family: 0b)
              Serial #:   KCT812
              Part #:     030-1184-002
        (Could not contact X server; thus, no XSGIvc information available)

_________________
Now this is a deep dark secret, so everybody keep it quiet :)
It turns out that when reset, the WD33C93 defaults to a SCSI ID of 0, and it was simpler to leave it that way... -- Dave Olson, in comp.sys.sgi

Currently in commercial service: Image :Onyx2:(2x) :O3x02L:
In the museum: almost every MIPS/IRIX system.
Wanted: GM1 board for Professional Series GT graphics (030-0076-003, 030-0076-004)


Top
 Profile  
 
Unread postPosted: Tue Jul 28, 2009 3:06 am 
Offline
User avatar

Joined: Thu May 26, 2005 2:37 am
Posts: 627
Location: Munich, Germany
Very nice system! You set up that Onyx2 very fast.

_________________
:Octane: :Octane2: 2xR12000 400MHz, 4GB RAM, V12
SGI - the legend will never die!!


Top
 Profile  
 
Unread postPosted: Tue Jul 28, 2009 3:21 am 
Offline
User avatar

Joined: Thu Jun 17, 2004 10:35 am
Posts: 3830
Location: Wijchen, The Netherlands
Geoman wrote:
You set up that Onyx2 very fast.

Using the harddrive from my own Onyx2 and Foetz's disk clone script it's rather trivial :D

_________________
Now this is a deep dark secret, so everybody keep it quiet :)
It turns out that when reset, the WD33C93 defaults to a SCSI ID of 0, and it was simpler to leave it that way... -- Dave Olson, in comp.sys.sgi

Currently in commercial service: Image :Onyx2:(2x) :O3x02L:
In the museum: almost every MIPS/IRIX system.
Wanted: GM1 board for Professional Series GT graphics (030-0076-003, 030-0076-004)


Top
 Profile  
 
Unread postPosted: Sun Aug 09, 2009 11:50 pm 
Offline

Joined: Mon Jan 28, 2008 11:50 am
Posts: 305
Location: Bristol. UK
That is a VERY sexy piece of hardware! :) Any shots of the back?

-J

_________________
No SGI box currently...Snif!


Top
 Profile  
 
Unread postPosted: Mon Aug 10, 2009 6:14 am 
Offline
User avatar

Joined: Thu Jun 17, 2004 10:35 am
Posts: 3830
Location: Wijchen, The Netherlands
JacquesT wrote:
That is a VERY sexy piece of hardware! :)

Want to buy one?

JacquesT wrote:
Any shots of the back?

Attachment:
IMG_2132.jpg
IMG_2132.jpg [ 1.29 MiB | Viewed 2015 times ]

There's an exhaust plenum under the Onyx2, but in this photo it's partially obscured by the power strip.
I fitted an intake plenum to this system as well, you can see it here from the front: viewtopic.php?f=3&t=16721463&start=16

Above it you can see the exhaust plenum of the second Onyx2

_________________
Now this is a deep dark secret, so everybody keep it quiet :)
It turns out that when reset, the WD33C93 defaults to a SCSI ID of 0, and it was simpler to leave it that way... -- Dave Olson, in comp.sys.sgi

Currently in commercial service: Image :Onyx2:(2x) :O3x02L:
In the museum: almost every MIPS/IRIX system.
Wanted: GM1 board for Professional Series GT graphics (030-0076-003, 030-0076-004)


Top
 Profile  
 
Unread postPosted: Mon Aug 10, 2009 10:15 am 
Offline

Joined: Mon Jan 28, 2008 11:50 am
Posts: 305
Location: Bristol. UK
jan-jaap wrote:
JacquesT wrote:
That is a VERY sexy piece of hardware! :)

Want to buy one?


:lol: :lol: :lol:

Sorry, I'd have to sell my house...Oh wait! I don't own my house...I rent! Haha!

Seriously, no thank you. I have to buy a MIG welder in the coming months...So many things to do, so little time (and money)

Thanks for the photo. It's a lovely clean machine.

-J

_________________
No SGI box currently...Snif!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group