Get me some case shots

Open discussion on or around SGI; software/hardware related posts should go in the appropriate subforum.
Forum rules
Any posts concerning pirated software or offering to buy/sell/trade commercial software are subject to removal.
User avatar
Alien
Posts: 143
Joined: Mon Jul 12, 2004 1:38 pm
Location: Amsterdam
Contact:

Re: Get me some case shots

Unread postby Alien » Mon May 12, 2008 1:56 pm

Heh. Somehow, I knew this would happen… :D

::removes foot from mouth::

.tsooJ
:Crimson: :Crimson: :O2000: :540: :1600SW: :1600SW: :320: :320: :Indigo: :Indigo: :O2: :O2: :Indy: :Indy: :Indy:
Based on its small physical dimensions and quiet operation, the chassis fits into a normal office environment.
— Crimson Owner's Guide

User avatar
pentium
Posts: 4400
Joined: Mon Aug 28, 2006 6:29 pm
Location: Kamloops, BC

Re: Get me some case shots

Unread postby pentium » Mon May 12, 2008 3:08 pm

nekonoko wrote:Okay, updated the icons again. Looks like we need an update to the Onyx2 rack so it matches Joerg's contribution :)

I'll work on it but I can't get the dang color right. :evil:
I guess while I am at I'll also update the deskside versions as well so the colors match up a little better.
Last edited by pentium on Mon May 12, 2008 3:27 pm, edited 2 times in total.
:Crimson: :Onyx: :O2000: :O200: :O200: :PI: :PI: :Indigo: :Indigo: :Indigo: :Octane: :O2: :1600SW: :Indigo2: :Indigo2: :Indigo2IMP: :Indigo2IMP: :Indy: :Indy: :Indy: :Cube:

Image <-------- A very happy forum member.

User avatar
joerg
Posts: 2223
Joined: Thu Jan 08, 2004 6:57 am
Location: In an origin rack - Germany
Contact:

Re: Get me some case shots

Unread postby joerg » Mon May 12, 2008 3:23 pm

pentium wrote:
nekonoko wrote:Okay, updated the icons again. Looks like we need an update to the Onyx2 rack so it matches Joerg's contribution :)

I'll work on it but I can't get the dang color right. :evil:


If you like i can make the changes. Compared to this photo i need only to move some pixel around. For me it looks like that o2k rack and onxy2 rack uses the same colors.
Image

I thought about my o3k but the rack doesnt look very impressive when the front door is closed. Maybe i can spend some time on after tomorrows work. If i get it i also can create the o3200 half rack.

regards
Joerg

User avatar
pentium
Posts: 4400
Joined: Mon Aug 28, 2006 6:29 pm
Location: Kamloops, BC

Re: Get me some case shots

Unread postby pentium » Mon May 12, 2008 3:27 pm

Okay, The existing Onyx2 rack ( :Onyx2R: ) is now replaced with this and this:

Image Image

The existing Origin 2000 deskside has also been updated from this ( :O2000: ) to this:

Image

I have also resized the O2 because of that random space it had.

Image

As for the 320 and 540...oh alright, but I don't have the time to do them right now.
:Crimson: :Onyx: :O2000: :O200: :O200: :PI: :PI: :Indigo: :Indigo: :Indigo: :Octane: :O2: :1600SW: :Indigo2: :Indigo2: :Indigo2IMP: :Indigo2IMP: :Indy: :Indy: :Indy: :Cube:

Image <-------- A very happy forum member.

User avatar
recondas
Moderator
Moderator
Posts: 5301
Joined: Sun Jun 06, 2004 5:55 pm
Location: NC - USA

Re: Get me some case shots

Unread postby recondas » Mon May 12, 2008 3:43 pm

pentium wrote:Okay, The existing Onyx2 rack is now replaced with this and this

Looks good.
joerg wrote:For me it looks like that o2k rack and onxy2 rack uses the same colors.

Here's a couple of photos of them side-by-side <the color reproduction isn't the best though>:
Onyx2_O2K.jpg

Desk.jpg
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************

User avatar
nekonoko
Site Admin
Site Admin
Posts: 8040
Joined: Thu Jan 23, 2003 1:31 am
Location: Pleasanton, California
Contact:

Re: Get me some case shots

Unread postby nekonoko » Mon May 12, 2008 3:47 pm

Okay, updated again. If you find you have missing images in your signature you may need to update/refresh it to get the new ones to take.
Twitter: @neko_no_ko
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

User avatar
pentium
Posts: 4400
Joined: Mon Aug 28, 2006 6:29 pm
Location: Kamloops, BC

Re: Get me some case shots

Unread postby pentium » Mon May 12, 2008 4:40 pm

Actually Recondas, the The Onyx2 and Origin 2000 racks I did were based off your photos. That would explain why the colors were a little off (and then made worse by my monitor).
:Crimson: :Onyx: :O2000: :O200: :O200: :PI: :PI: :Indigo: :Indigo: :Indigo: :Octane: :O2: :1600SW: :Indigo2: :Indigo2: :Indigo2IMP: :Indigo2IMP: :Indy: :Indy: :Indy: :Cube:

Image <-------- A very happy forum member.

User avatar
joerg
Posts: 2223
Joined: Thu Jan 08, 2004 6:57 am
Location: In an origin rack - Germany
Contact:

Re: Get me some case shots

Unread postby joerg » Tue May 13, 2008 1:55 am

According to recondas 2nd photo a onyx2 comes with a lower "blueish" origin computing module?
This returns in something weird looking system like this.
Image

Searching through google images most onyx2 uses the same color for gfx and computing modules. Also the original photos on the sgi website doesnt show different collors there. Take notice that the door missing the plastics for the upper module because there is no need for cover the craylinks.
Image


Onyx2 Rack with extension modules.
ImageImageImage

Onyx2 Rack Multipipe(Monster?)
ImageImageImage


regards
Joerg

User avatar
joerg
Posts: 2223
Joined: Thu Jan 08, 2004 6:57 am
Location: In an origin rack - Germany
Contact:

Re: adding metarouter

Unread postby joerg » Tue May 13, 2008 3:41 am

First shot for the metarouter.
Image

For all who have a 128way maschine in the basement.


:O2000R: :O2000E: :O2000E: :O2000E:Image :O2000E: :O2000E: :O2000E: :O2000E:

No way to reduce the space between the icons?

regards
Joerg

User avatar
recondas
Moderator
Moderator
Posts: 5301
Joined: Sun Jun 06, 2004 5:55 pm
Location: NC - USA

Re: Get me some case shots

Unread postby recondas » Tue May 13, 2008 3:57 am

joerg wrote:According to recondas 2nd photo a onyx2 comes with a lower "blueish" origin computing module?

Kinda hard to tell in those photos, but the facade on the compute module is the same color as the graphics module - purple <I did mention the color reproduction in the photo is off :)>. I have seen one somewhere <eBay?> that had a blue compute module, but it probably wasn't a factory configuration.
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************

User avatar
joerg
Posts: 2223
Joined: Thu Jan 08, 2004 6:57 am
Location: In an origin rack - Germany
Contact:

Re: adding O3000 Rack

Unread postby joerg » Tue May 13, 2008 6:06 am

As always dont like the o3000 looking....
Image

regards
Joerg

User avatar
pentium
Posts: 4400
Joined: Mon Aug 28, 2006 6:29 pm
Location: Kamloops, BC

Re: Get me some case shots

Unread postby pentium » Tue May 13, 2008 11:20 am

It's a good start.
Bah! The 320 and 540 are really driving me nuts. if I want to keep them to scale the curves don't work and it looks blocky but I got to do them.

EDIT: here is a quickly done 320 and 540.

Image Image
:Crimson: :Onyx: :O2000: :O200: :O200: :PI: :PI: :Indigo: :Indigo: :Indigo: :Octane: :O2: :1600SW: :Indigo2: :Indigo2: :Indigo2IMP: :Indigo2IMP: :Indy: :Indy: :Indy: :Cube:

Image <-------- A very happy forum member.

kramlq
Posts: 926
Joined: Tue Sep 20, 2005 5:10 pm
Location: IRL

Re: Get me some case shots

Unread postby kramlq » Tue May 13, 2008 3:37 pm

pentium wrote:It's a good start.
Bah! The 320 and 540 are really driving me nuts. if I want to keep them to scale the curves don't work and it looks blocky but I got to do them.

EDIT: here is a quickly done 320 and 540.

Image Image

Great! Thanks for your great work Pentium. Don't worry about the curved case shape - its probably impossible to accurately do it in a small icon, and the VW series looks distinct enough that its easily recognisable anyway.

User avatar
Arti77
Posts: 262
Joined: Wed Apr 27, 2005 2:40 am
Location: Melbourne, Australia

Re: Get me some case shots

Unread postby Arti77 » Tue May 13, 2008 7:20 pm

That's awesome Pentium, thanks
My gear:
:O200: R10k 180mhz, 128mb, 36gb
:Indy: R5k 150SC, 128mb, 9g
:Indigo2: Teal, 256mb, 18GB, Extreme


Return to “SGI: Discussion”

Who is online

Users browsing this forum: No registered users and 0 guests