What SUN hardware do we have?

Unread postby **nekonoko** » Sat Feb 18, 2006 3:01 pm

Currently SB 2000, Netra T1 AC220 and 3/80. In the past I've owned many Sun systems including IPX, IPC, SS10, SS20, SS1, SS5, etc. My first UNIX workstation was the 3/80 which I picked up in 1994 from an ISP in Japan (it was being used as a mail server).

evol262 · Unread postby **evol262** » Sat Feb 18, 2006 3:10 pm

How much are you asking for it? I love SunPCI cards.

Unread postby **nekonoko** » Sat Feb 18, 2006 3:18 pm

evol262 wrote:How much are you asking for it? I love SunPCI cards.

$50 for the whole machine including that card - I need to clear out some machines, make room for others

evol262 · Unread postby **evol262** » Sat Feb 18, 2006 3:28 pm

I'll definitely take it. Send me a PM with payment details.

coredog64 · Unread postby **coredog64** » Sat Feb 18, 2006 6:28 pm

Hakimoto wrote:@ coredog64: how much too hot? i'm going to runa 73 gig 10k drive in it, with the little fan in front of it. Not enough?

At some point I just gave up and ran the thing without the cover. However a couple years back I saw that some guy did a casemod to his SS20. He chopped a hole in the top and used a 120mm fan to keep the innards cool.
I never had the energy to try something like that...

Unread postby **Hakimoto** » Sun Feb 19, 2006 4:02 am

@ coredog64: symptoms? unforesen power-downs and the like? how did you figure it was because of the heat? i think i might just add a fan to it then... i can imagine the whole thing getting quite hot because of the Dual ROSS modules, they look like they're DESIGNED to shed heat like no tomorrow...

Ga53n · Unread postby **Ga53n** » Sun Feb 19, 2006 4:43 am

current: Tadpole Ultrabook IIi 400 Mhz., 1 GB RAM, Creator 3D

former: Ultra 10 440 Mhz. 1GB RAM, Creator 3D

I have the feeling, that the disk I/O od the Tadpole is way better that that of the Ultra 10, so ist is much more fun to work with it.

I Trashed some Ultra 1 & 2 machines as well as some ss20 etc. at my last employer, because I did not have the room for them and they definetly did not like the idea, me selling them on ebay.

Intruder · Unread postby **Intruder** » Sun Feb 19, 2006 6:51 am

Hello,

I have :

1 Ultra 10 (440Mhz, 512 MB RAM, 20GB HDD, USB 2, CD Writer) runing Debian SPARC : it's my gateway, dev server, temp files server
1 Ultra 5 (400Mhz, 256 MB RAM, 20GB HDD, CD) : it's my future Solaris test box
1 Ultra 1 (170Mhz, 256 MB RAM, 2.1GB HDD, CD) : it's my Debian Sparc test
box

That's all ....

VenomousPinecone · Unread postby **VenomousPinecone** » Sun Feb 19, 2006 12:57 pm

Excellent thread idea.

Currently at this moment I only have a dead U10 Creator 3d sitting in my garage, my first true Unix workstation.

I am saving for a SB 1500 (new model) or SB 2k, eventually to replace the Octane.

coredog64 · Unread postby **coredog64** » Sun Feb 19, 2006 3:30 pm

Hakimoto wrote:@ coredog64: symptoms? unforesen power-downs and the like? how did you figure it was because of the heat? i think i might just add a fan to it then... i can imagine the whole thing getting quite hot because of the Dual ROSS modules, they look like they're DESIGNED to shed heat like no tomorrow...

ISTR I saw one or two shutdowns before I gave up and ran with the cover off. As hot as the Ross one's look I think they're not nearly so bad as some of the higher-spec Sun MBus modules.

Check out the list of configurations here

jgilje · Unread postby **jgilje** » Sun Feb 19, 2006 3:30 pm

I've got an Ultra 60 with 2x450 UltraSPARC II, Expert3D graphics and 2GB RAM

kshuff · Unread postby **kshuff** » Sun Feb 19, 2006 5:25 pm

Just two here lost in a sea of SGI's...

SparcStation 5 and a Tadpole Sparcbook 3XP

SiliconClassics · Unread postby **SiliconClassics** » Sun Feb 19, 2006 6:25 pm

Sparcstation IPX: 64mb RAM, 2Gb HDD, SBUS SCSI/Ethernet card. Stacked on external HDD, CDROM and tape drives. Works great but mostly sits around looking cute. Currently runs Solaris 2.4

Sparcstation 20: 2x180Mhz Ross cpus, 512Mb RAM, 18Gb HDD, TurboGX+ and wide diff. SCSI sbus cards. Has CDROM and floppy drives. Tried using it with a Leo graphics adapter but ran too hot, so that Leo is now collecting dust in a drawer. Nice machine and runs Solaris 2.6 great, but I don't use it much.

I love the build quality of these machines, especially the IPX. And that Sun 5c keyboard is probably the most comfortable I've ever used. But why did they give the mouse such a low sample rate?!?

R-ten-K · Unread postby **R-ten-K** » Sun Feb 19, 2006 7:37 pm

I do not "own" this setup, but it is what I use most of the time @ work, so it basically "owns" me:

Desktop: Ultra 20 (2Gz, 2GB, Solaris 10)
Server: Fire T2000 (1Gz, 16GB, Solaris 10)
Misc: Blade 150 (650Mhz, 1.5GB Linux)
Ultra 10x2 (440Mhz, 512MB Solaris & NetBSD)
Ultra 2 (2x300Mhz, 2GB, Solaris 10)
SparcStation 20 (2x75Mhz, 512MB, Linux)

coredog64 · Unread postby **coredog64** » Mon Feb 20, 2006 8:35 am

I do not "own" this setup, but it is what I use most of the time @ work, so it basically "owns" me:
...
Server: Fire T2000 (1Gz, 16GB, Solaris 10)

What's your impression of the T2000 so far? I'm trying to get my boss to consider one of these as a replacement for something we're currently running on part of an E10K (just HTTP/CGI, so lack of FP is not an issue).

Nekochan Net

What SUN hardware do we have?

Who is online