3D printing: sorry, I had to...

Open discussion on or around SGI; software/hardware related posts should go in the appropriate subforum.
Forum rules
Any posts concerning pirated software or offering to buy/sell/trade commercial software are subject to removal.
User avatar
ian_finder
Posts: 180
Joined: Mon Jul 04, 2005 2:04 pm

3D printing: sorry, I had to...

Unread postby ian_finder » Mon Mar 31, 2014 11:36 pm

Sorry if this has been done before... Not sure, haven't been on nekochan in a while.

But ever since buying the Replicator I've wanted to do this... and perhaps even before that. :D

In an earlier post I managed to print a very, very small one of these, but this is the first one I've been able to print at a reasonable size... had to add supports, and clean up the mesh.

The best part? This is not s remake-- this is a physical build of the cleaned up, converted geometry I extracted from one of the iris demos :)
Attachments
WP_20140331_23_12_48_Raw.jpg
WP_20140331_23_12_30_Raw.jpg
WP_20140331_23_11_26_Raw.jpg
:OnyxR: :Crimson: :Onyx: :O2000: :ChallengeL: :Onyx2: :PI: :Indigo2: :Indigo2IMP: :Indy: :Octane2: :Octane: :Indigo: :O2: :1600SW: :pdp8e: :Cube:

User avatar
miod
Posts: 507
Joined: Fri Oct 09, 2009 2:44 am
Location: Clermont-Ferrand (France)
Contact:

Re: 3D printing: sorry, I had to...

Unread postby miod » Mon Mar 31, 2014 11:47 pm

Awesome! Now all you need is to paint it silver! :-D
:Indigo:R3000 (alas, dead) :Indigo:R4000 x4 :Indigo2:R4400 :Indigo2IMP:R4400 x2 :Indigo2:R8000 :Indigo2IMP:R10000 :Indy:R4000PC :Indy:R4000SC :Indy:R4400SC :Indy:R4600 :Indy:R5000SC :O2:R5000 x3 :O2:RM7000 :Octane:2xR10000 :Octane:R12000 :O200:2xR12000 :O200: - :O200:2x2xR10000 :Fuel:R16000 :O3x0:4xR16000 :A350:
among more than 150 machines : Apollo, Data General, Digital, HP, IBM, MIPS before SGI, Motorola, NeXT, SGI, Solbourne, Sun...

User avatar
Trippynet
Donor
Donor
Posts: 783
Joined: Thu Aug 15, 2013 6:22 am
Location: Aberdeen, Scotland, UK

Re: 3D printing: sorry, I had to...

Unread postby Trippynet » Wed Apr 02, 2014 2:27 am

Looks cool, I like it!
Systems in use:
:Indigo2IMP: - Nitrogen: R10000 195MHz CPU, 384MB RAM, SolidIMPACT Graphics, 36GB 15k HDD & 300GB 10k HDD, 100Mb/s NIC, New/quiet fans, IRIX 6.5.22
:Fuel: - Lithium: R14000 600MHz CPU, 4GB RAM, V10 Graphics, 72GB 15k HDD & 300GB 10k HDD, 1Gb/s NIC, New/quiet fans, IRIX 6.5.30
Other system in storage: :O2: R5000 200MHz, 224MB RAM, 72GB 15k HDD, PSU fan mod, IRIX 6.5.30

User avatar
foetz
Moderator
Moderator
Posts: 6542
Joined: Mon Apr 14, 2003 4:34 am
Contact:

Re: 3D printing: sorry, I had to...

Unread postby foetz » Wed Apr 02, 2014 9:48 am

great :D

User avatar
ClassicHasClass
Donor
Donor
Posts: 2071
Joined: Wed Jul 25, 2012 7:12 pm
Location: Sunny So Cal
Contact:

Re: 3D printing: sorry, I had to...

Unread postby ClassicHasClass » Wed Apr 02, 2014 4:53 pm

Very nice!
Paint it!
smit happens.

:Fuel: bigred, 900MHz R16K, 4GB RAM, V12 DCD, 6.5.30
:Indy: indy, 150MHz R4400SC, 256MB RAM, XL24, 6.5.10
:Indigo2IMP: purplehaze, 175MHz R10000, Solid IMPACT
probably posted from Image bruce, Quad 2.5GHz PowerPC 970MP, 16GB RAM, Mac OS X 10.4.11
plus IBM POWER6 p520 * Apple Network Server 500 * RDI PrecisionBook * BeBox * Solbourne S3000 * Commodore 128 * many more...

threedprof
Posts: 1
Joined: Wed Jul 02, 2014 8:22 am

Re: 3D printing: sorry, I had to...

Unread postby threedprof » Wed Jul 02, 2014 8:36 am

That is pretty sweet! I've always wanted one as a pendant

User avatar
vishnu
Donor
Donor
Posts: 3174
Joined: Sun Mar 18, 2007 3:25 pm
Location: Minneapolis, Minnesota USA

Re: 3D printing: sorry, I had to...

Unread postby vishnu » Wed Jul 02, 2014 11:27 am

Words fail me... :shock:
Attachments
calvin.gif
calvin.gif (3.65 KiB) Viewed 941 times
Project:
Temporarily lost at sea...
Plan:
World domination! Or something...

:Tezro: :Octane2:

User avatar
ian_finder
Posts: 180
Joined: Mon Jul 04, 2005 2:04 pm

Re: 3D printing: sorry, I had to...

Unread postby ian_finder » Sat Aug 30, 2014 12:53 pm

Update: I've made the 3D printable STL file available here.
http://www.thingiverse.com/thing:446728

Please remove if this violates forum TOS.
:OnyxR: :Crimson: :Onyx: :O2000: :ChallengeL: :Onyx2: :PI: :Indigo2: :Indigo2IMP: :Indy: :Octane2: :Octane: :Indigo: :O2: :1600SW: :pdp8e: :Cube:

User avatar
hamei
Posts: 10433
Joined: Tue Feb 24, 2004 4:10 pm
Location: over the rainbow

Re: 3D printing: sorry, I had to...

Unread postby hamei » Sat Aug 30, 2014 9:17 pm

ian_finder wrote:Update: I've made the 3D printable STL file available here.
http://www.thingiverse.com/thing:446728

Please remove if this violates forum TOS.

Pretty cool, thanks !

I'm attaching it here also so that when Thingyverse decides its irrevocable commitment to the kermyooonity has expired, us SGI users will not be left in the cold. Hope you don't mind ...
sgi_cube.stl.gz
(323.28 KiB) Downloaded 34 times
I spent a fortune on booze, birds, and fast cars ... the rest I just squandered

User avatar
Kumba
Posts: 231
Joined: Mon May 24, 2004 12:14 am
Location: Byzantine Secundus

Re: 3D printing: sorry, I had to...

Unread postby Kumba » Wed Sep 03, 2014 9:46 pm

Now I suddenly want to hunt down an affordable 3d printer...
:Onyx2: 4x R14000 :Tezro: 4x R16000 :Fuel: 1x R16000 :Octane: 2x R14000 :O2+: RM7000 :O2: R10000 :O2: RM5200 :Indigo: R4400 :Indigo2IMP: R10000 :Indigo2: R8000 :O3x0: 4x R14000 :Indy: R5000

"The past tempts us, the present confuses us, the future frightens us. And our lives slip away, moment by moment, lost in that vast, terrible in-between."
--Emperor Turhan, Centauri Republic

User avatar
jan-jaap
Donor
Donor
Posts: 4881
Joined: Thu Jun 17, 2004 11:35 am
Location: Wijchen, The Netherlands
Contact:

Re: 3D printing: sorry, I had to...

Unread postby jan-jaap » Thu Sep 04, 2014 12:31 am

I'm staring at a brand new UltiMaker2, boss put it there for the employees to toy with :twisted: :mrgreen:
:PI: :Indigo: :Indigo: :Indy: :Indy: :Indy: :Indigo2: :Indigo2: :Indigo2IMP: :Octane: :Octane2: :O2: :O2+: Image :Fuel: :Tezro: :4D70G: :Skywriter: :PWRSeries: :Crimson: :ChallengeL: :Onyx: :O200: :Onyx2: :O3x02L:
To accentuate the special identity of the IRIS 4D/70, Silicon Graphics' designers selected a new color palette. The machine's coating blends dark grey, raspberry and beige colors into a pleasing harmony. (IRIS 4D/70 Superworkstation Technical Report)


Return to “SGI: Discussion”

Who is online

Users browsing this forum: No registered users and 2 guests