Mystery Origin 200 Dual CPU revealed.

Open discussion on or around SGI; software/hardware related posts should go in the appropriate subforum.
Forum rules
Any posts concerning pirated software or offering to buy/sell/trade commercial software are subject to removal.
User avatar
Intuition
Posts: 314
Joined: Thu Oct 15, 2009 1:56 pm

Mystery Origin 200 Dual CPU revealed.

Unread postby Intuition » Wed Jan 17, 2018 3:25 pm

So I purchased this Origin 200 from a craigslist ad over a year ago for $100. It was a garage sale that had multiple computers and tech stuff. I saw the Origin and had to go look at it. The guy lived in Thousand Oaks and said his company used to develop things for SGI and that they sent them this Origin 200 to develop with.

Since I am clearing out old stuff today (no, I'm not getting rid of any SGI stuff) I thought I would finally take a look at this thing.

All the lower drive bays are filled except slot two has a blank instead of a sled.

Bottom slide says 6.5.15f which I assume is an Irix version.

I see two CPUs and it looks like the part number 013-2382-002
corresponds with 225mhz r10k as far as SGI parts lists I could find online.

It is quite pristine except for the fact that there are small pockets of dust around the vents in the back. He said it was in his garage to develop with for about three months then not used much again.

So now.... what to do with it?

I know that Maya 6.5 was the first release to implement network CPUs to help in rendering. So I might be able to set it up as extra render cores for Mental Ray or at least Maya software renderer.

But.. First off. Is learning how to get the o2 or Octane to talk to it. (Octane cpu/mxe card coming tomorrow I think).

Since these were not built with a graphical output I have to drive it from another SGI or computer right?
Attachments
Origin200_Side.jpg
Origin200_Front.jpg
Origin200_DualCPU.jpg
Image O2 - 300mhz
Image O2 - 400mhz :1600SW: 1600sw
:Octane: 2x400mhz :O200: Origin 200 2x225mhz
aka Casey Christopher

User avatar
Raion-Fox
Donor
Donor
Posts: 1554
Joined: Thu Jan 30, 2014 5:01 pm
Location: near King George, Virginia
Contact:

Re: Mystery Origin 200 Dual CPU revealed.

Unread postby Raion-Fox » Wed Jan 17, 2018 4:19 pm

Jeez that's a nice one.

Yes, you'll need to connect to it over a serial console.
:O3x02L: R16000 700MHz 8GB RAM kanna
:Octane: R12000 300MHz SI 896MB RAM yuuka
:Octane2: R12000A 400MHz V6 2.5GB RAM
:Tezro: Quad R16000 700MHz V12 8GB RAM murasaki
:Indy: (Acclaim) R4600 133MHz XL Graphics 32MB RAM
:Indy: (Challenge S) R4600 133MHz (MIPS III Build Server)

I am probably posting from yangxiaolong, HP Z230 with Xeon E3-1230v3, 16GB RAM, GeForce 750ti, and running NetBSD and Windows 8.1 Embedded.
Owner and operator of http://irix.pw

User avatar
jan-jaap
Donor
Donor
Posts: 4965
Joined: Thu Jun 17, 2004 11:35 am
Location: Wijchen, The Netherlands
Contact:

Re: Mystery Origin 200 Dual CPU revealed.

Unread postby jan-jaap » Thu Jan 18, 2018 12:15 am

I use mine as an install server. I think it's too loud to run for long times (or at least I don't want to be in the same room).

Except for the serial console you can use remote X11 using another SGI or e.g. a Windows PC and Xming. Only the IRIX X server speaks the DGL extension and without it some utilities like gr_osview or jot don't work on older IRIX versions (I think < 6.5.22).
:PI: :Indigo: :Indigo: :Indy: :Indy: :Indy: :Indigo2: :Indigo2: :Indigo2IMP: :Octane: :Octane2: :O2: :O2+: Image :Fuel: :Tezro: :4D70G: :Skywriter: :PWRSeries: :Crimson: :ChallengeL: :Onyx: :O200: :Onyx2: :O3x02L:
To accentuate the special identity of the IRIS 4D/70, Silicon Graphics' designers selected a new color palette. The machine's coating blends dark grey, raspberry and beige colors into a pleasing harmony. (IRIS 4D/70 Superworkstation Technical Report)


Return to “SGI: Discussion”

Who is online

Users browsing this forum: No registered users and 1 guest