PGA Socket Adapter for GR 1.x Turbo Graphics option

Searching for hard-to-find gear? A post in here might just shake something loose!
Forum rules
Any posts concerning pirated software or offering to buy/sell/trade commercial software are subject to removal.
User avatar
pentium
Posts: 4819
Joined: Mon Aug 28, 2006 6:29 pm
Location: Kamloops, BC

PGA Socket Adapter for GR 1.x Turbo Graphics option

Unread postby pentium » Mon Feb 26, 2018 7:55 pm

Okay so I'll finally admit that a few years ago I paid WAY too much for the guts of a 4D/35 from a scrap dealer who had pulled all the socketed chips off the IP12 and GR 1.5 board for their metal content. Pretty much I was after the pile of 4mb ram SIMMS for my R3K Indigo's and the graphics subsystem which had BP3, ZB1, TG and the one Bt431KC chip that would upgrade my second 4D/20. ;)
While I was able to beg he did not take the four DSP chips in the top of the Turbo Graphics option, I neglected to also ask him to keep the socket adapter the board uses to plug into the socket on the board.

CGS_7830.JPG

CGS_7831.JPG


Where on earth would I find such a device?
:Crimson: :Onyx: :O2000: :O200: :O200: :PI: :PI: :Indigo: :Indigo: :Indigo: :Octane: :O2: :1600SW: :Indigo2: :Indigo2: :Indigo2IMP: :Indigo2IMP: :Indy: :Indy: :Indy: :Cube:

Image <-------- A very happy forum member.

robespierre
Posts: 1676
Joined: Mon Sep 12, 2011 2:28 pm
Location: Boston

Re: PGA Socket Adapter for GR 1.x Turbo Graphics option

Unread postby robespierre » Mon Feb 26, 2018 11:54 pm

Mill-Max 551 Series

edit: Looks like 551-10-201-15-04x000 but it could be custom

http://www.advanced.com, RCA189-68G

http://www.arieselec.com, 189-PGM15051-41

http://www.ironwoodelectronics.com/prod ... ockets.cfm
:PI: :O2: :Indigo2IMP: :Indigo2IMP:


Return to “Hardware Wanted”

Who is online

Users browsing this forum: No registered users and 1 guest