Iris indigo Parts For Sale Soon

Have some gear for sale? Post it here!
Forum rules
Any posts concerning pirated software or offering to buy/sell/trade commercial software are subject to removal.
User avatar
blackcube
Posts: 285
Joined: Fri Jul 04, 2003 9:55 am
Location: Dallas, TX USA
Contact:

Iris indigo Parts For Sale Soon

Unread postby blackcube » Tue Aug 12, 2003 5:11 am

I bought a whole pallet of Indigo's. As soon as they are shipped to me, I'm going to evaluate them and will most likely have a buttload of parts available. Some may be whole machines, others may only be good for parts. I'm really only interested in covering my costs and cherry picking for my own Indigo's. The pallet of blue boxes only cost me $22.00 but the freight getting them here is almost $200.

I'll keep everyone updated. I thought I'd offer them here and on irisindigo.com first, before I went to ebay.

User avatar
dexter1
Moderator
Moderator
Posts: 2062
Joined: Thu Feb 20, 2003 6:57 am
Location: Voorburg, The Netherlands
Contact:

Unread postby dexter1 » Tue Aug 12, 2003 9:26 am

R3K or R4K Indigo's? If they are R3K's i'm interested in the 64pin 8MB simms. If these will be gutted, some recent eeprom's on the board and backplane are desirable as well.

directedition
Posts: 515
Joined: Mon Feb 03, 2003 5:20 pm
Location: Pasadena, MD
Contact:

Unread postby directedition » Tue Aug 12, 2003 9:47 am

I'm interested in a front panel door, elan graphics, 8MB 68pin SIMMS, and a power supply.
- Jim
:Indigo: :Indigo: :Indy: :Indy: <- signed by The Screensavers :) :Indigo2IMP: (230L) (230L) :540: :1600SW: :1600SW: <- touchscreen :PI: :Octane2:

User avatar
whiter
Posts: 972
Joined: Tue Apr 29, 2003 2:02 pm
Location: Winterthur, Switzerland
Contact:

Unread postby whiter » Tue Aug 12, 2003 11:12 am

I'm interested in 8MB 64pin simms and sleds (+peripherals)
Shall I describe it to you? Or do you want me to get you a box?

User avatar
nekonoko
Site Admin
Site Admin
Posts: 8031
Joined: Thu Jan 23, 2003 1:31 am
Location: Pleasanton, California
Contact:

Re: Iris indigo Parts For Sale Soon

Unread postby nekonoko » Tue Aug 12, 2003 11:31 am

I'm interested in a plain (no graphics silkscreen) door if one becomes available. The door I currently have has a "XS-24" silkscreen, but it's an Elan system (with badge) :D
Twitter: @neko_no_ko
IRIX Release 4.0.5 IP12 Version 06151813 System V
Copyright 1987-1992 Silicon Graphics, Inc.
All Rights Reserved.

User avatar
dravier
Posts: 17
Joined: Mon Jul 28, 2003 12:56 pm
Location: livin' hear near Allentown...
Contact:

Unread postby dravier » Tue Aug 12, 2003 3:08 pm

so you're the one that got that pallet o' goodies of eBay, a? very cool... i'm looking for any 2+GB HD's, with or without sleds. Elan badge... and a power supply. the only other thing is if there's a set of 3D glasses in there =) please contact me with the kind of prices you'd like to see for the items listed if you have them... msg here, email, whatever.

thanks for offering to share your newly found fortune! a wicked snag and nice offer to split with the univeristy lab worth of computers.
- dravier

"a little rebellion now and then is a good thing" -Thomas Jefferson

User avatar
blackcube
Posts: 285
Joined: Fri Jul 04, 2003 9:55 am
Location: Dallas, TX USA
Contact:

Unread postby blackcube » Tue Aug 12, 2003 4:29 pm

That was me. I also bought the two that were offered together a couple of weeks ago. They are in route from up north, complete with monitors, four mice, keyboards and a lot of software. I can't wait to get them here and running.

I want to keep 3-4 Indigo's. The rest I'll either sell or part out depending on condition. I already have some apare parts: a XS24z board(2 GE's, 3 TRAMS, z-buffer), a 8 bit graphics board(1 GE, 1 TRAM, no z-buffer), 2 R4000 boards, backplane and power supply. There is supposed to be two more waiting at home for me tonight - and I have to work late.

User avatar
whiter
Posts: 972
Joined: Tue Apr 29, 2003 2:02 pm
Location: Winterthur, Switzerland
Contact:

Unread postby whiter » Wed Aug 13, 2003 11:12 am

I guess that XZ24 board works in an Indigo r3k right?
What do you want for it? I'm quite interested in upgrading from my entry 8-bit board.
Shall I describe it to you? Or do you want me to get you a box?

User avatar
dexter1
Moderator
Moderator
Posts: 2062
Joined: Thu Feb 20, 2003 6:57 am
Location: Voorburg, The Netherlands
Contact:

Unread postby dexter1 » Wed Aug 13, 2003 5:07 pm

whiter wrote:I guess that XZ24 board works in an Indigo r3k right?


It will work, provided your PROM is rev 3 (last three digits are -003)

User avatar
whiter
Posts: 972
Joined: Tue Apr 29, 2003 2:02 pm
Location: Winterthur, Switzerland
Contact:

Unread postby whiter » Thu Aug 14, 2003 12:03 am

I'm settled then.
Gimme a proper quote and I'll take it off your hands, blackcube!
Shall I describe it to you? Or do you want me to get you a box?


Return to “Hardware For Sale/Trade”

Who is online

Users browsing this forum: Google [Bot], ivelegacy and 3 guests