SGI PCI card 4 Port USB Card 9210286 on my ONYX4

SGI hardware problems, solutions, tips, hacks, etc.
Forum rules
Any posts concerning pirated software or offering to buy/sell/trade commercial software are subject to removal.
User avatar
jmjsgi
Posts: 54
Joined: Thu May 01, 2003 1:42 pm
Location: French Polynesia
Contact:

SGI PCI card 4 Port USB Card 9210286 on my ONYX4

Unread postby jmjsgi » Wed Apr 19, 2017 8:22 pm

Hello everyone
I have installed a SGI PCI card 4 Port USB Card 9210286 on my ONYX4 and when i connect my SGI USB keyboard. It does not work.
My IRIX system is 6.5.30m.
Can anyone help me?
:O2+: :1600SW: SGI O2+ R12000 400 768mo and 36gb
:O2: :1600SW: :O2: O2 R5000 180 320 2x18gb
:Indy: Indy R5000 180mhz
:Indigo2IMP: Indigo2maximum impact R10000 195
:O3x0: ONIX4 4x800 8gb V12 150gb
:Tezro: TEZRO 4x1ghz

User avatar
recondas
Moderator
Moderator
Posts: 5425
Joined: Sun Jun 06, 2004 5:55 pm
Location: NC - USA

Re: SGI PCI card 4 Port USB Card 9210286 on my ONYX4

Unread postby recondas » Fri Apr 21, 2017 3:49 pm

jmjsgi wrote:Can anyone help me?


If you haven't already done so, you might try deleting or renaming /etc/ioconfig.conf, then reboot the system with the USB kb&m attached. IRIX will regenerate ioconfig with active entries for your USB kb&m (run man ioconfig at a command prompt for some additional detail).

I prefer to save the existing copy of ioconfig, and usually rename to ioconfig.conf.O. That's a capital O (as in Old), which would make the saved copy appear if you ran the versions changed command).
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************


Return to “SGI: Hardware”

Who is online

Users browsing this forum: No registered users and 1 guest