Nekochan Net

Official Chat Channel: #nekochan // irc.nekochan.net
It is currently Sat Mar 08, 2014 10:34 am

View unanswered posts | View active topics View unread posts


Board index » SGI » SGI: Hardware

All times are UTC - 8 hours


Forum rules


Any posts concerning pirated software or offering to buy/sell/trade commercial software are subject to removal.



Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
  Print view Previous topic | First unread post | Next topic 
Author Message
Adrenaline
Unread postPosted: Thu Jan 12, 2012 7:30 am 
Offline
User avatar

Joined: Thu Feb 10, 2005 12:37 pm
Posts: 486
Location: Laurel, MD USA
I have an opportunity to get 2 Altix 350s and was wondering the noise level? With my Origin 300 on I can barely hear my wife 20ft down the hallway. Is it louder or on the same level as an Origin 300?

_________________
:Indigo: 33mhz R3k/48mb/XS24 :Indy: 150mhz R4400/256mb/XL24 :Fuel: 600mhz R14kA/2gb/V10 Image 8x1.4ghz Itanium 2/8GB :O3x08R: 32x600mhz R14kA/24GB :Tezro: 4x700mhz R16k/8GB/V12/DCD/SAS/FC/DM5 (2x) :O3x0: 4x700mhz R16k/4GB :PrismDT: 2x1.6ghz 8mb/12gb/SAS/2xFGL


Last edited by Adrenaline on Thu Jan 12, 2012 10:33 am, edited 1 time in total.

Top
 Profile  
 
Voralyan
 Post subject: Re: Altix 350 Loudness?
Unread postPosted: Thu Jan 12, 2012 8:41 am 
Offline
User avatar

Joined: Wed Mar 05, 2008 12:28 pm
Posts: 125
Location: Paderborn, Germany
I have 2 Altix 350 C Bricks:
Code:
http://forums.nekochan.net/viewtopic.php?f=14&t=16725842

I can't really compare them to the O300 but from what I've read the Altix bricks are a lot more silent. I think about
the same level as the O350 bricks. A single O200 is certainly much louder...

For me it doesn't disturb me much when they are running 2 meters away from my desk.

_________________
:A3502L: :O2000: :O200: = :O200: - :O200: :O200: :Octane: :Octane: :320: :O2: :Indigo2IMP: :Indy:
+ | d | i | g | i | t | a | l | +apple +[...] ;)
Top
 Profile  
 
Adrenaline
 Post subject: Re: Altix 350 Loudness?
Unread postPosted: Thu Jan 12, 2012 8:50 am 
Offline
User avatar

Joined: Thu Feb 10, 2005 12:37 pm
Posts: 486
Location: Laurel, MD USA
Cool, I'm ok with a little noise. I've a ton of other servers in my home office, but most of them are 4U (thus 120mm nearly silent fans).

One other question, I know Server 2008 and Server 2008 R2 came out for Itanium, does it install on a Altix 350?

_________________
:Indigo: 33mhz R3k/48mb/XS24 :Indy: 150mhz R4400/256mb/XL24 :Fuel: 600mhz R14kA/2gb/V10 Image 8x1.4ghz Itanium 2/8GB :O3x08R: 32x600mhz R14kA/24GB :Tezro: 4x700mhz R16k/8GB/V12/DCD/SAS/FC/DM5 (2x) :O3x0: 4x700mhz R16k/4GB :PrismDT: 2x1.6ghz 8mb/12gb/SAS/2xFGL
Top
 Profile  
 
jeffwa
 Post subject: Re: Altix 350 Loudness?
Unread postPosted: Thu Jan 12, 2012 10:38 am 
Offline

Joined: Sat Mar 29, 2008 9:26 am
Posts: 81
Location: WI
They're not that bad, little louder if you have the "boost fans" (Only present in systems w/1.5GHz and up procs). It's the same chassis as the Origin 350 and I'm 99% sure it uses the same blowers. However, they do put out quite a bit of heat.

Adrenaline wrote:
One other question, I know Server 2008 and Server 2008 R2 came out for Itanium, does it install on a Altix 350?

Won't install due to lack of a Windows driver for the Shub ASIC.

_________________
:A3504L: :PrismDT: :320: :1600SW: :Indy: :O2: :O2: :O2: :O2+: :Octane2: :O2000R:
Top
 Profile  
 
Adrenaline
 Post subject: Re: Altix 350 Loudness?
Unread postPosted: Thu Jan 12, 2012 10:40 am 
Offline
User avatar

Joined: Thu Feb 10, 2005 12:37 pm
Posts: 486
Location: Laurel, MD USA
jeffwa wrote:
They're not that bad, little louder if you have the "boost fans" (Only present in systems w/1.5GHz and up procs). It's the same chassis as the Origin 350 and I'm 99% sure it uses the same blowers. However, they do put out quite a bit of heat.

Adrenaline wrote:
One other question, I know Server 2008 and Server 2008 R2 came out for Itanium, does it install on a Altix 350?

Won't install due to lack of a Windows driver for the Shub ASIC.


I guess I'll pass on it then, no need for another Linux/Unix only box then with my Origin 300 and Blade.

_________________
:Indigo: 33mhz R3k/48mb/XS24 :Indy: 150mhz R4400/256mb/XL24 :Fuel: 600mhz R14kA/2gb/V10 Image 8x1.4ghz Itanium 2/8GB :O3x08R: 32x600mhz R14kA/24GB :Tezro: 4x700mhz R16k/8GB/V12/DCD/SAS/FC/DM5 (2x) :O3x0: 4x700mhz R16k/4GB :PrismDT: 2x1.6ghz 8mb/12gb/SAS/2xFGL
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 

Board index » SGI » SGI: Hardware

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 3 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group