Nekochan Net

It turns out that just next floor there was a nice PowerPC server (and InfoWindow term) that belonged to our department (but it was long forgotten).
I got it, trying to take ownership on it, and have some questions:

How do you open it?
What graphics can it take, it apparently has a graphic card, but will not boot when it's inserted
What was the last AIX that supported it?
Bear in mind, that I'm actually a newbie to AIX/PPC/MCA

_________________

DECpc AXP/150, AS600 5/333, Sun IPX, Ultra 60, Mac LC630, Power Mac G4 Digital Audio, Amiga 1200T, IBM 7009-C10, HP Envizex a, A180, B132L, C360, C3600 x2.

I believe you need the key to open a C10 case.

_________________

http://en.wikipedia.org/wiki/RS/6000#Type_7009

AIX 3.2.5 - 5.1

AIX 5.1 was the last to support MCA.

_________________
4xRS6K 2xHP9K 6xSUN 1xDEC 14xMAC 7xPC 2xPS2

Do yourself a favor and run 4.3.3. AIX v5.1 is very slow on the older, lower memory hardware. AIX v3 is very odd. Throughout the v4 series IBM made is much more friendly, though 4.3.3 is the easiest to find software for and the most friendly.

Don't mess with the Java admin tools, either. Go SMIT all the way (until you learn enough about AIX to do it on your own, though even IBM doesn't recommend that).

_________________
Damn the torpedoes, full speed ahead!

Systems available for remote access on request.

(single-CM)

I might have some RS/6000 parts for MCA era machines.
$5 plus shipping.

Regan

_________________
死の神はりんごだけ食べる

アレゲはアレゲ以上のなにものでもなさげ -- アレゲ研究家


J5600, 2 x Mac, 3 x SUN, Alpha DS20E, Alpha 800 5/550, 3 x RS/6000, Amiga 4000 VideoToaster, Amiga4000 -030, 733MHz Sam440 AmigaOS 4.1 update 1. Tandem Himalaya S-Series Nonstop S72000 ServerNet.

Sold:

Cortex ---> http://www.facebook.com/pages/Cortex-th ... 11?sk=info
Minnie ---> http://www.facebook.com/pages/Minnie-th ... 02?sk=info
Book ----> http://pymblesoftware.com/book/
Github ---> https://github.com/pymblesoftware
Visit http://www.pymblesoftware.com
Search for "Pymble", "InstaElf", "CryWhy" or "Cricket Score Sheet" in the iPad App store or search for "Pymble" or "CryWhy" in the iPhone App store.

OK, opened it, pulled the graphics out of it, will see if it finishes booting, for now no serial console and stops at 517

_________________

DECpc AXP/150, AS600 5/333, Sun IPX, Ultra 60, Mac LC630, Power Mac G4 Digital Audio, Amiga 1200T, IBM 7009-C10, HP Envizex a, A180, B132L, C360, C3600 x2.

How long did you wait...? I've had RS/6000 stop at the same check code for what seemed like for ever but it was "normal" for that particular machine... I was doing device driver work on one RS/6000 and it had a 12 minute boot cycle. Even more modern machines stop in the same check code for several minutes..


....debugging by moving the panic() and reading the dump was tedious...

_________________
死の神はりんごだけ食べる

アレゲはアレゲ以上のなにものでもなさげ -- アレゲ研究家


J5600, 2 x Mac, 3 x SUN, Alpha DS20E, Alpha 800 5/550, 3 x RS/6000, Amiga 4000 VideoToaster, Amiga4000 -030, 733MHz Sam440 AmigaOS 4.1 update 1. Tandem Himalaya S-Series Nonstop S72000 ServerNet.

Sold:

Cortex ---> http://www.facebook.com/pages/Cortex-th ... 11?sk=info
Minnie ---> http://www.facebook.com/pages/Minnie-th ... 02?sk=info
Book ----> http://pymblesoftware.com/book/
Github ---> https://github.com/pymblesoftware
Visit http://www.pymblesoftware.com
Search for "Pymble", "InstaElf", "CryWhy" or "Cricket Score Sheet" in the iPad App store or search for "Pymble" or "CryWhy" in the iPhone App store.

for now, just doing reboot cycles, but will wait - there's an update however: it nicely spit "PROBLEM DETECTED" with BNC connection

Update 2:OK. I suspect now it had some NFS shares that it's unable to mount now, unfortunately I can't get a proper serial console (help appreciated), and the graphics it has installed doesn't show anything (looks like it does at least start booting, because there's a serious disk activity after SCSI being checked).

_________________

DECpc AXP/150, AS600 5/333, Sun IPX, Ultra 60, Mac LC630, Power Mac G4 Digital Audio, Amiga 1200T, IBM 7009-C10, HP Envizex a, A180, B132L, C360, C3600 x2.

The term you want is "AIX IPL progress codes"

http://publib.boulder.ibm.com/infocenter/powersys/v3r1m5/index.jsp?topic=/ipha6_p5/diag1.htm

_________________
4xRS6K 2xHP9K 6xSUN 1xDEC 14xMAC 7xPC 2xPS2

Yes, that's the first thing I got. The trouble is, without any interaction with AIX there's no telling why does it stop there.

_________________

DECpc AXP/150, AS600 5/333, Sun IPX, Ultra 60, Mac LC630, Power Mac G4 Digital Audio, Amiga 1200T, IBM 7009-C10, HP Envizex a, A180, B132L, C360, C3600 x2.

You need to boot into single-user mode and hack the /etc/vfs or equivalent. So it's serial console time, you may need to boot from CD.

_________________
4xRS6K 2xHP9K 6xSUN 1xDEC 14xMAC 7xPC 2xPS2

Shall I write that again or you'll notice?

_________________

DECpc AXP/150, AS600 5/333, Sun IPX, Ultra 60, Mac LC630, Power Mac G4 Digital Audio, Amiga 1200T, IBM 7009-C10, HP Envizex a, A180, B132L, C360, C3600 x2.

What does a "non proper serial console look like"? Anything from any serial port? You may have to press "1" or "2" at the serial console keyboard during critical times in the boot for it to switch to it.

_________________
4xRS6K 2xHP9K 6xSUN 1xDEC 14xMAC 7xPC 2xPS2

IME only booting the installation media allows you to select a console at boot time, in that way. If you want to change it on a running system, you have to log in as root and run 'chcons'.

_________________

Sounds like time for the manual.

If it's getting to 517 I think it must have selected something as a console.

_________________
4xRS6K 2xHP9K 6xSUN 1xDEC 14xMAC 7xPC 2xPS2