What software uses the firewire on a Fuel ?

Video, software tools and techniques on SGI systems.
Forum rules
Any posts concerning pirated software or offering to buy/sell/trade commercial software are subject to removal.
strandedinnz
Posts: 258
Joined: Fri Feb 08, 2008 1:11 pm
Location: Auckland, New Zealand

What software uses the firewire on a Fuel ?

Unread postby strandedinnz » Wed Sep 09, 2009 6:10 am

Hi there,

I've a firewire board in my Fuel .. how do I make use of it ?

I want to both import and export video via it .. but I don't know what commands under IRIX would do that.

Any pointers ... I quite happily RTFM if I know which manual to read :-)

Thanks

Mark
:Fuel:

User avatar
recondas
Moderator
Moderator
Posts: 5441
Joined: Sun Jun 06, 2004 5:55 pm
Location: NC - USA

Re: What software uses the firewire on a Fuel ?

Unread postby recondas » Wed Sep 09, 2009 4:59 pm

I queried "firewire" and "fuel" and found these <not too promising> threads:
viewtopic.php?f=3&t=16719300&
Unfortunately it looks like nothing much has changed from December '08:
viewtopic.php?f=16&t=16719650&
In December 2008 you wrote:
strandedinnz wrote:I suppose the next question is .... how do I capture video from a firewire device ?
jan-jaap wrote:I'm afraid the short answer is 'you don't'.


The search brought back a few more, but unfortunately I think those two pretty much sum up the current state of the fuel-firewire-video situation.
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************

User avatar
hamei
Posts: 10433
Joined: Tue Feb 24, 2004 4:10 pm
Location: over the rainbow

Re: What software uses the firewire on a Fuel ?

Unread postby hamei » Thu Sep 10, 2009 8:50 am

strandedinnz wrote:Any pointers ...

Pick up a Canopus ADVC 55. Then we'd confirm that none of the supported firewire video devices work.


Return to “SGI: Video”

Who is online

Users browsing this forum: No registered users and 2 guests