GCC-4.8.0 porting.

IRIX/Nekoware development, porting and related topics.
Forum rules
Any posts concerning pirated software or offering to buy/sell/trade commercial software are subject to removal.
User avatar
rosehillbob
Posts: 51
Joined: Sat Apr 11, 2015 6:25 am

GCC-4.8.0 porting.

Unread postby rosehillbob » Mon Oct 26, 2015 3:23 pm

I am currently working on replacing the IRIX specific source code removed from GCC 4.8.0 and later distributions. I am down to remaining 10K lines of code to check and if nothing unexpected shows up should have a patch file to build a GCC 4.8.0 compiler ready in a couple of weeks.
:Onyx2: :O2: :Octane:

User avatar
Trippynet
Donor
Donor
Posts: 785
Joined: Thu Aug 15, 2013 6:22 am
Location: Aberdeen, Scotland, UK

Re: GCC-4.8.0 porting.

Unread postby Trippynet » Mon Oct 26, 2015 3:31 pm

Great stuff! It's something I've wanted to do myself to be honest, but I probably lack the programming/debugging skills to do it properly. I imagine the later 5.x builds will be a lot more difficult.

Wish you the best of luck!
Systems in use:
:Indigo2IMP: - Nitrogen: R10000 195MHz CPU, 384MB RAM, SolidIMPACT Graphics, 36GB 15k HDD & 300GB 10k HDD, 100Mb/s NIC, New/quiet fans, IRIX 6.5.22
:Fuel: - Lithium: R14000 600MHz CPU, 4GB RAM, V10 Graphics, 72GB 15k HDD & 300GB 10k HDD, 1Gb/s NIC, New/quiet fans, IRIX 6.5.30
Other system in storage: :O2: R5000 200MHz, 224MB RAM, 72GB 15k HDD, PSU fan mod, IRIX 6.5.30


Return to “SGI: Development”

Who is online

Users browsing this forum: No registered users and 2 guests