Octane Dual R12K 300 + MXE

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
rmigfr
Posts: 18
Joined: Sun Feb 08, 2004 11:59 am

Octane Dual R12K 300 + MXE

Unread postby rmigfr » Wed Mar 24, 2004 11:41 am

Octane Dual R12000 300 MHz,
1 GB memory,
MXE graphic cards,
Two 36 GB Maxtor Atlas IV hard disk.

hinv -mv :

Location: /hw/node
PM20300MHZ Board: barcode JHT782 part 030-1356-001 rev K
Location: /hw/node/xtalk/15
IP30 Board: barcode GRX008 part 030-0887-003 rev M
Location: /hw/node/xtalk/15/pci/2
PWR.SPPLY.S2 Board: barcode AAC8080462 part 060-0038-001 rev D
FP1 Board: barcode 97394B part 030-0891-003 rev C
Location: /hw/node/xtalk/12
MOT20 Board: barcode KCY690 part 030-1240-003 rev G
2 300 MHZ IP30 Processors
Heart ASIC: Revision E
CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 1024 Mbytes
Xbow ASIC: Revision 1.3
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive: unit 2 on SCSI controller 0 (unit 2)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
CDROM: unit 3 on SCSI controller 1
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: EMXI
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3


gfxinfo :

Graphics board 0 is "IMPACTSR" graphics.
Managed (":0.0") 1280x1024
Product ID 0x3, 2 GEs, 2 REs, 4 TRAMs
MGRAS revision 4, RA revision 0
HQ rev B, GE12 rev A, RE4 rev C, PP1 rev H,
VC3 rev A, CMAP rev F, Heart rev E
19" monitor (id 0x1)

Channel 0:
Origin = (0,0)
Video Output: 1280 pixels, 1024 lines, 72.24Hz (1280x1024_72)

Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 1 guest