1 R12k 300mhz, ESI. SI, ESI, 896mb, Xbow 1.3, Irix 6.5.22

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
User avatar
OSWebman
Posts: 42
Joined: Wed Mar 26, 2003 5:20 pm
Location: Brooklyn, NY
Contact:

1 R12k 300mhz, ESI. SI, ESI, 896mb, Xbow 1.3, Irix 6.5.22

Unread postby OSWebman » Wed Mar 17, 2004 8:04 pm

My new system running 6.5.22
hinv -vm:
Location: /hw/node
PM10300MHZ Board: barcode HKW763 part 030-1355-001 rev K
Location: /hw/node/xtalk/15
IP30 Board: barcode JEZ981 part 030-1467-001 rev B
Location: /hw/node/xtalk/15/pci/2
PWR.SPPLY.ER Board: barcode AAE9050592 part 060-0035-001 rev C
FP1 Board: barcode JLR735 part 030-0891-003 rev E
Location: /hw/node/xtalk/12
MOT10 Board: barcode HRG178 part 030-1241-002 rev G
Location: /hw/node/xtalk/11
GM10 Board: barcode FEP305 part 030-0938-003 rev Z
Location: /hw/node/xtalk/9
GM10 Board: barcode FGX376 part 030-0938-003 rev N
1 300 MHZ IP30 Processor
Heart ASIC: Revision F
CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 896 Mbytes
Xbow ASIC: Revision 1.3
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: ESI
Graphics board: SI
Graphics board: ESI
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
PCI Adapter ID (vendor 4265, device 3) pci slot 2
PCI Adapter ID (vendor 4215, device 4128) pci slot 0
PCI Adapter ID (vendor 4215, device 4128) pci slot 1
PCI Adapter ID (vendor 4265, device 5) pci slot 3

gfxinfo:
Graphics board 0 is "IMPACTSR" graphics.
Managed (":0.0") 1280x1024
Product ID 0x2, 1 GE, 1 RE, 0 TRAMs
MGRAS revision 4, RA revision 0
HQ rev B, GE12 rev A, RE4 rev C, PP1 rev G,
VC3 rev A, CMAP rev E, Heart rev F
21" monitor (id 0xb)

Channel 0:
Origin = (0,0)
Video Output: 1280 pixels, 1024 lines, 75.92Hz (1280x1024_76)
Graphics board 1 is "IMPACTSR" graphics.
Managed (":0.1") 1280x1024
Product ID 0x2, 1 GE, 1 RE, 0 TRAMs
MGRAS revision 0, RA revision 0
HQ rev B, GE11 rev B, RE4 rev C, PP1 rev A,
VC3 rev A, CMAP rev E, Heart rev F
unknown, assuming 19" monitor (id 0xf)

Channel 0:
Origin = (0,0)
Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60)
Graphics board 2 is "IMPACTSR" graphics.
Unmanaged 1280x1024
Product ID 0x2, 1 GE, 1 RE, 0 TRAMs
MGRAS revision 0, RA revision 0
HQ rev B, GE12 rev =, RE4 rev C, PP1 rev A,
VC3 rev A, CMAP rev E, Heart rev F
unknown, assuming 19" monitor (id 0xf)

Xvc info not available for unmanaged boards

Anyone know how to get that third Board to be recognized by the Octane?
Thanks,
Eugene Redko

User avatar
0ctane
Posts: 169
Joined: Thu Jul 10, 2003 6:28 pm
Location: Cincinnati, OH
Contact:

Unread postby 0ctane » Thu Mar 18, 2004 11:08 am

Good luck. I tried three boards in an Octane (2 SI, one ESI in slots A-C), but no love. I may have actually damaged one of the boards in the process. :o In a different thread, someone mentioned that 3 might be possible. http://forums.nekochan.net/viewtopic.php?t=1858&highlight=


Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 1 guest