Octane R10k-250/2 MB Cache, MXI+SI

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
andreas@rootprompt
Posts: 93
Joined: Sun Feb 02, 2003 5:49 pm
Location: Germany

Octane R10k-250/2 MB Cache, MXI+SI

Unread postby andreas@rootprompt » Tue Feb 24, 2004 7:43 pm

Octane250 6# hinv -mv
Location: /hw/node
PM10250MHZ Board: barcode HRY712 part 030-1426-001 rev C
Location: /hw/node/xtalk/15
IP30 Board: barcode GXP904 part 030-0887-005 rev A
Location: /hw/node/xtalk/15/pci/2
FP1 Board: barcode FTK338 part 030-0891-003 rev C
PWR.SPPLY.ER Board: barcode AAE8510113 part 060-0035-001 rev B
Location: /hw/node/xtalk/12
GM20 Board: barcode EBC244 part 030-0957-003 rev G
Location: /hw/node/xtalk/11
GM10 Board: barcode GBS798 part 030-0938-003 rev T
1 250 MHZ IP30 Processor
Heart ASIC: Revision E
CPU: MIPS R10000 Processor Chip Revision: 3.4
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
Main memory size: 1024 Mbytes
Xbow ASIC: Revision 1.3
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: MXI
Graphics board: SI
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
PCI Adapter ID (vendor 4265, device 3) pci slot 2
PCI Adapter ID (vendor 4215, device 4128) pci slot 0
PCI Adapter ID (vendor 4215, device 4128) pci slot 1
PCI Adapter ID (vendor 4265, device 5) pci slot 3

Octane250 7# /usr/gfx/gfxinfo
Graphics board 0 is "IMPACTSR" graphics.
Managed (":0.0") 1280x1024
Product ID 0x3, 2 GEs, 2 REs, 4 TRAMs
MGRAS revision 1, RA revision 0
HQ rev B, GE11 rev B, RE4 rev C, PP1 rev A,
VC3 rev A, CMAP rev E, Heart rev E
unknown, assuming 19" monitor (id 0x9)

Channel 0:
Origin = (0,0)
Video Output: 1280 pixels, 1024 lines, 72.24Hz (1280x1024_72)
Graphics board 1 is "IMPACTSR" graphics.
Managed (":0.1") 1280x1024
Product ID 0x2, 1 GE, 1 RE, 0 TRAMs
MGRAS revision 1, RA revision 0
HQ rev B, GE11 rev B, RE4 rev C, PP1 rev H,
VC3 rev A, CMAP rev E, Heart rev E
unknown, assuming 19" monitor (id 0xf)

Channel 0:
Origin = (0,0)
Video Output: 1280 pixels, 1024 lines, 72.24Hz (1280x1024_72)
Octane250 8#


... my ex SSI-Octane now with two freshly reworked TRAMs :)

Return to “SGI: hinv”

Who is online

Users browsing this forum: Google [Bot] and 1 guest