O2 R5200 300MHz 384Mb

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
JacquesT
Posts: 503
Joined: Mon Jan 28, 2008 11:50 am
Location: Somerset, UK

O2 R5200 300MHz 384Mb

Unread postby JacquesT » Fri Apr 20, 2018 2:45 pm

Code: Select all

CPU: MIPS R5000 Processor Chip Revision: 10.0
FPU: MIPS R5000 Floating Point Coprocessor Revision: 10.0
1 300 MHZ IP32 Processor
Main memory size: 384 Mbytes
Secondary unified instruction/data cache size: 1 Mbyte on Processor 0
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
FLASH PROM version 4.18
Integral SCSI controller 0: Version ADAPTEC 7880
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  CDROM: unit 4 on SCSI controller 0
Integral SCSI controller 1: Version ADAPTEC 7880
On-board serial ports: tty1
On-board serial ports: tty2
On-board EPP/ECP parallel port
CRM graphics installed
Integral Ethernet: ec0, version 1
Iris Audio Processor: version A3 revision 1
  PCI Adapter ID (vendor 0x9004, device 0x8078) PCI slot 1
  PCI Adapter ID (vendor 0x9004, device 0x8078) PCI slot 2
Video: MVP unit 0 version 1.4
AV: AV1 Card version 1, Camera not connected.
Vice: TRE


Code: Select all

Graphics board 0 is "CRM" graphics.
   Managed (":0.0") 1280x1024
   32 bitplanes
   board revision 2, CRM revision C, GBE revision B
    Monitor 0 type: DEL -24554
   Channel 0:
    Origin = (0,0)
    Video Output: 1280 pixels, 1024 lines, 59.94Hz (1280x1024_60)
    Video Format Flags:  (none)
    Sync Disabled
    Using Gamma Map 0


While a 300MHz proc helps for general system use fireflop still makes the machine feel like it's wading through a pool of molasses. Otherwise a fun little system.
:Octane: - 1xR12k 400Mhz, 1GB, V8, 18Gb 10K & 36Gb 15K HDD, 6.5.30
:Octane: - 1xR12k 300Mhz, 384MB, SSE, 18Gb 10K HDD, 6.5.30
:O2: :1600SW: - 300Mhz R5200, 384MB, 36Gb 15K HDD, A/V, FPA, 4x CD-ROM, 6.5.30
"Ho Ho," Says the keeper of the beat.

User avatar
Intuition
Posts: 412
Joined: Thu Oct 15, 2009 1:56 pm
Location: Marina Del Rey, CA

Re: O2 R5200 300MHz 384Mb

Unread postby Intuition » Fri Apr 20, 2018 7:54 pm

Any pics of the machine?

Also, I have a 180mhz o2 I have to pick up someday from south of San Fran. I plan on getting a 300mhz just like you for it.

My plan for all the o2s is to get Dodoids d1 which will hopefully make the net browsing less painful.
Image O2 - 300mhz
Image O2 - 400mhz :1600SW: 1600sw
:Octane: 2x400mhz :O200: Origin 200 2x225mhz
aka Casey Christopher

JacquesT
Posts: 503
Joined: Mon Jan 28, 2008 11:50 am
Location: Somerset, UK

Re: O2 R5200 300MHz 384Mb

Unread postby JacquesT » Sat Apr 21, 2018 12:49 am

Image

Image
:Octane: - 1xR12k 400Mhz, 1GB, V8, 18Gb 10K & 36Gb 15K HDD, 6.5.30
:Octane: - 1xR12k 300Mhz, 384MB, SSE, 18Gb 10K HDD, 6.5.30
:O2: :1600SW: - 300Mhz R5200, 384MB, 36Gb 15K HDD, A/V, FPA, 4x CD-ROM, 6.5.30
"Ho Ho," Says the keeper of the beat.

User avatar
Intuition
Posts: 412
Joined: Thu Oct 15, 2009 1:56 pm
Location: Marina Del Rey, CA

Re: O2 R5200 300MHz 384Mb

Unread postby Intuition » Sat Apr 21, 2018 10:18 pm

WOW, very nice condition. :shock:
Image O2 - 300mhz
Image O2 - 400mhz :1600SW: 1600sw
:Octane: 2x400mhz :O200: Origin 200 2x225mhz
aka Casey Christopher

User avatar
cascatino
Posts: 33
Joined: Wed Jan 17, 2018 1:58 am
Location: Jesi, Italy

Re: O2 R5200 300MHz 384Mb

Unread postby cascatino » Mon Apr 23, 2018 3:50 am

I'm glad you made it, excellent piece!

....what about the plastic fan cover? ;)
:Fuel: "Enzo", R14K, 1.5Gb RAM, V10, 6.5.29 **NOT WORKING, PSU issues** :evil:
:O2: "Frodo", R5k@300MHz, 768Mb RAM, A/V module

JacquesT
Posts: 503
Joined: Mon Jan 28, 2008 11:50 am
Location: Somerset, UK

Re: O2 R5200 300MHz 384Mb

Unread postby JacquesT » Mon Apr 23, 2018 7:24 am

Don't have the fan cover, or the metal pull ring for the psu.

The machine was an ex demonstration machine to show clients software for modelling shoe last forms and learher cutting patterns I believe. Spyro will know more detail.

It has a few rub marks on the av module side where somebody removed a sticker, but otherwise in good condition. :)
:Octane: - 1xR12k 400Mhz, 1GB, V8, 18Gb 10K & 36Gb 15K HDD, 6.5.30
:Octane: - 1xR12k 300Mhz, 384MB, SSE, 18Gb 10K HDD, 6.5.30
:O2: :1600SW: - 300Mhz R5200, 384MB, 36Gb 15K HDD, A/V, FPA, 4x CD-ROM, 6.5.30
"Ho Ho," Says the keeper of the beat.

User avatar
Irinikus
Posts: 711
Joined: Wed Apr 27, 2016 4:25 am
Location: Between Pretoria and Cape Town, South Africa

Re: O2 R5200 300MHz 384Mb

Unread postby Irinikus » Mon Apr 23, 2018 7:26 am

You can buy a cover from Mashek on eBay. (Thats where I got mine.)
Image ................................... Image Image Image Image Image Image Image Image Image
Image ................................... Image Image Image Image Image Image Image Image
Image ... Image
Image ........................ Image
Image ........................ Image Image

JacquesT
Posts: 503
Joined: Mon Jan 28, 2008 11:50 am
Location: Somerset, UK

Re: O2 R5200 300MHz 384Mb

Unread postby JacquesT » Mon Apr 23, 2018 12:50 pm

I think Spyro may still have the plastic cover, somewhere in his stash of stuff. I'll swing by his in the future to see if he's managed to dig it out.
:Octane: - 1xR12k 400Mhz, 1GB, V8, 18Gb 10K & 36Gb 15K HDD, 6.5.30
:Octane: - 1xR12k 300Mhz, 384MB, SSE, 18Gb 10K HDD, 6.5.30
:O2: :1600SW: - 300Mhz R5200, 384MB, 36Gb 15K HDD, A/V, FPA, 4x CD-ROM, 6.5.30
"Ho Ho," Says the keeper of the beat.

User avatar
spiroyster
Donor
Donor
Posts: 197
Joined: Thu May 03, 2012 8:24 am
Location: Somerset, UK

Re: O2 R5200 300MHz 384Mb

Unread postby spiroyster » Mon Apr 30, 2018 1:16 am

JacquesT wrote:I think Spyro may still have the plastic cover, somewhere in his stash of stuff. I'll swing by his in the future to see if he's managed to dig it out.

Yep sat here right in front of me... and broken off clip (thats rare, I mean who still has the clip of the fan cover o.0)

JacquesT wrote:Don't have the fan cover, or the metal pull ring for the psu.

The machine was an ex demonstration machine to show clients software for modelling shoe last forms and learher cutting patterns I believe. Spyro will know more detail.

It has a few rub marks on the av module side where somebody removed a sticker, but otherwise in good condition. :)

omg, your forensic skills are good... completely forgot about that sticker (branding :roll:). Yes it was demo machine for CSM3D Shoemaster (https://atom-shoemaster.com/en/) when it ran on Irix.... circa ~2002/03, before the migration to Windows (via Softwindows 95 :shock:).

Trivia: The original Shoemaster code had one of the first implementations of Bezier curves outside Renault :D
CLICK HERE to find out what click bait is. You will not believe what you discover.
#NaN singles in your area are already making gazzilions by using this trick.

Cambridge Analytica approved!!


Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 2 guests