Indy R4400 200MHz 24-bit video 256MB

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
Posts: 3
Joined: Sat Dec 09, 2017 12:19 am

Indy R4400 200MHz 24-bit video 256MB

Unread postby netfreak » Thu Jan 11, 2018 10:05 pm

Code: Select all

CPU: MIPS R4400 Processor Chip Revision: 6.0
FPU: MIPS R4000 Floating Point Coprocessor Revision: 0.0
1 200 MHZ IP22 Processor
Main memory size: 256 Mbytes
Secondary unified instruction/data cache size: 1 Mbyte on Processor 0
Instruction cache size: 16 Kbytes
Data cache size: 16 Kbytes
Integral SCSI controller 0: Version WD33C93B, revision D
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
On-board serial ports: 2
On-board bi-directional parallel port
Graphics board: Indy 24-bit
Integral Ethernet: ec0, version 1
Integral ISDN: Basic Rate Interface unit 0, revision 1.0
Iris Audio Processor: version A2 revision 4.1.0
Vino video: unit 0, revision 0, IndyCam not connected

Code: Select all

Graphics board 0 is "NG1" graphics.
        Managed (":0.0") 1024x768
        24 bitplanes, NG1 revision 3, REX3 revision B, VC2 revision A
        MC revision C, xmap9 revision A, cmap revision C, bt445 revision A
        Display 1024x768 @ 60Hz, monitor id 15

Bought a bunch of Indys off eBay in 2006 and only last month got around to trying out one of the two I had left. Picked up a few system upgrades and also the SCSI2SD as I'm out of good disks.

indys.jpg (59.78 KiB) Viewed 100 times
:Indy: Indy R4400 200MHz 256MB
:Indy: Indy R4600 100MHz 32MB

Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 3 guests