Octane R12k 2x400MHz, 768MB, MXI + SE, CADduo, MENET, GigE, Serial

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
User avatar
japes
Donor
Donor
Posts: 999
Joined: Thu Nov 08, 2007 4:35 pm
Location: Lynnwood, WA

Octane R12k 2x400MHz, 768MB, MXI + SE, CADduo, MENET, GigE, Serial

Unread postby japes » Tue Oct 17, 2017 11:59 pm

I'm posting a new hinv for an Octane I posted about sometime ago. Lots of swapping around has happened and it's pretty different now.

The plastics are the same Silicon Graphics Octane style in the previous post. The previous post showed a LED lightbar retrofit with blue and white leds, now it sports green/white. The blue/white light bar is in my Octane2 for obvious reasons. It's full of XIO cards with MXI and ESI graphics along with a MENET card. With the card cage full it is perpetually in fastfan mode but it's not the worst thing...

Shoebox is filled with a CADduo card, hacked 3Com GigE card and a SGI dual serial card.

All these cards mean 10 serial ports, 2 graphic desktops, and 7 network interfaces....maybe I should run a dual 1gigE card?

The file /usr/lib/X11/xdm/Xservers.2key is in place of /usr/lib/X11/xdm/Xservers setting the workstation up for two interactive desktop logins.

Code: Select all

duo 1# hinv -vm
Location: /hw/node
      PM20400MHZ Board: barcode KXA987     part 030-1476-001 rev  D
Location: /hw/node/xtalk/15
            IP30 Board: barcode LDY425     part 030-1467-001 rev  D
Location: /hw/node/xtalk/15/pci/2
             FP1 Board: barcode EDJ746     part 030-0891-003 rev  A
    PWR.SPPLY.SR Board: barcode AAA7151296 part 060-0028-003 rev  A
Location: /hw/node/xtalk/13
        XTALKPCI Board: barcode HPC734     part 030-0952-005 rev  D
Location: /hw/node/xtalk/13/pci/2
     PCI_SIO_UFC Board: barcode MNM068     part 030-1657-003 rev  A
Location: /hw/node/xtalk/13/pci/3
        PCI_ENET Board: barcode ECA773     part 030-1155-002 rev  C
Location: /hw/node/xtalk/12
            GM20 Board: barcode DZL083     part 030-0957-003 rev  G
Location: /hw/node/xtalk/11
           MOT10 Board: barcode HLG722     part 030-1241-002 rev  H
Location: /hw/node/xtalk/9
           MENET Board: barcode JHY709     part 030-0873-003 rev  J
Location: /hw/node/xtalk/9/pci/0
Location: /hw/node/xtalk/9/pci/1
Location: /hw/node/xtalk/9/pci/2
Location: /hw/node/xtalk/9/pci/3
2 400 MHZ IP30 Processors
Heart ASIC: Revision F
CPU: MIPS R12000 Processor Chip Revision: 3.5
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 768 Mbytes
Xbow ASIC: Revision 1.2
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
  Tape drive: unit 3 on SCSI controller 0: DAT
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3/IOC4 serial port: tty5
IOC3/IOC4 serial port: tty6
IOC3/IOC4 serial port: tty7
IOC3/IOC4 serial port: tty8
IOC3/IOC4 serial port: tty9
IOC3/IOC4 serial port: tty10
IOC3 parallel port: plp1
Graphics board: MXI
Graphics board: ESI
Integral Fast Ethernet: ef0, version 1, pci 2
Gigabit Ethernet: tg1, PCI slot 1
Fast Ethernet: ef1, version 1, pci 3
Fast Ethernet: ef2, version 1, pci 0
Fast Ethernet: ef3, version 1, pci 1
Fast Ethernet: ef4, version 1, pci 2
Fast Ethernet: ef5, version 1, pci 3
Iris Audio Processor: version RAD revision 12.0, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3
  PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 3
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 0
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 3


I'm not logged in on the second head so board 1 isn't running the X server, just login screen

Code: Select all

Graphics board 0 is "IMPACTSR" graphics.
        Managed (":0.0") 1280x1024
        Product ID 0x3, 2 GEs, 2 REs, 4 TRAMs
        MGRAS revision 1, RA revision 0
        HQ rev B, GE11 rev B, RE4 rev C, PP1 rev A,
        VC3 rev A, CMAP rev E, Heart rev F
        unknown, assuming 19" monitor (id 0xf)

        Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False
        Channel 0:
         Origin = (0,0)
         Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60)
         Video Format Flags:  (none)
         Sync Disabled
         Using Gamma Map 0
Graphics board 1 is "IMPACTSR" graphics.
        Managed (":1.0") 1280x1024
        Product ID 0x2, 1 GE, 1 RE, 0 TRAMs
        MGRAS revision 4, RA revision 0
        HQ rev B, GE12 rev A, RE4 rev C, PP1 rev H,
        VC3 rev A, CMAP rev F, Heart rev F
        unknown, assuming 19" monitor (id 0xf)

        (Could not contact X server; thus, no XSGIvc information available)
:O3000: :Fuel: :Tezro: :Tezro: :Octane2: :Octane: :Octane: :Indigo: :Indigo: :Indigo: :Indigo: :O2: :1600SW: :O2: :1600SW: :1600SW: :Indigo2: :Indigo2: :Indigo2: :Indigo2: :Indigo2IMP: :Indy: :Indy: :Indy: :Indy: :O3x0: :O3x02L: :O3x02L:

Return to “SGI: hinv”

Who is online

Users browsing this forum: vmul and 1 guest