The plastics are the same Silicon Graphics Octane style in the previous post. The previous post showed a LED lightbar retrofit with blue and white leds, now it sports green/white. The blue/white light bar is in my Octane2 for obvious reasons. It's full of XIO cards with MXI and ESI graphics along with a MENET card. With the card cage full it is perpetually in fastfan mode but it's not the worst thing...
Shoebox is filled with a CADduo card, hacked 3Com GigE card and a SGI dual serial card.
All these cards mean 10 serial ports, 2 graphic desktops, and 7 network interfaces....maybe I should run a dual 1gigE card?
The file /usr/lib/X11/xdm/Xservers.2key is in place of /usr/lib/X11/xdm/Xservers setting the workstation up for two interactive desktop logins.
Code: Select all
duo 1# hinv -vm
Location: /hw/node
PM20400MHZ Board: barcode KXA987 part 030-1476-001 rev D
Location: /hw/node/xtalk/15
IP30 Board: barcode LDY425 part 030-1467-001 rev D
Location: /hw/node/xtalk/15/pci/2
FP1 Board: barcode EDJ746 part 030-0891-003 rev A
PWR.SPPLY.SR Board: barcode AAA7151296 part 060-0028-003 rev A
Location: /hw/node/xtalk/13
XTALKPCI Board: barcode HPC734 part 030-0952-005 rev D
Location: /hw/node/xtalk/13/pci/2
PCI_SIO_UFC Board: barcode MNM068 part 030-1657-003 rev A
Location: /hw/node/xtalk/13/pci/3
PCI_ENET Board: barcode ECA773 part 030-1155-002 rev C
Location: /hw/node/xtalk/12
GM20 Board: barcode DZL083 part 030-0957-003 rev G
Location: /hw/node/xtalk/11
MOT10 Board: barcode HLG722 part 030-1241-002 rev H
Location: /hw/node/xtalk/9
MENET Board: barcode JHY709 part 030-0873-003 rev J
Location: /hw/node/xtalk/9/pci/0
Location: /hw/node/xtalk/9/pci/1
Location: /hw/node/xtalk/9/pci/2
Location: /hw/node/xtalk/9/pci/3
2 400 MHZ IP30 Processors
Heart ASIC: Revision F
CPU: MIPS R12000 Processor Chip Revision: 3.5
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 768 Mbytes
Xbow ASIC: Revision 1.2
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive: unit 2 on SCSI controller 0 (unit 2)
Tape drive: unit 3 on SCSI controller 0: DAT
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3/IOC4 serial port: tty5
IOC3/IOC4 serial port: tty6
IOC3/IOC4 serial port: tty7
IOC3/IOC4 serial port: tty8
IOC3/IOC4 serial port: tty9
IOC3/IOC4 serial port: tty10
IOC3 parallel port: plp1
Graphics board: MXI
Graphics board: ESI
Integral Fast Ethernet: ef0, version 1, pci 2
Gigabit Ethernet: tg1, PCI slot 1
Fast Ethernet: ef1, version 1, pci 3
Fast Ethernet: ef2, version 1, pci 0
Fast Ethernet: ef3, version 1, pci 1
Fast Ethernet: ef4, version 1, pci 2
Fast Ethernet: ef5, version 1, pci 3
Iris Audio Processor: version RAD revision 12.0, number 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3
PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 3
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 0
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 3I'm not logged in on the second head so board 1 isn't running the X server, just login screen
Code: Select all
Graphics board 0 is "IMPACTSR" graphics.
Managed (":0.0") 1280x1024
Product ID 0x3, 2 GEs, 2 REs, 4 TRAMs
MGRAS revision 1, RA revision 0
HQ rev B, GE11 rev B, RE4 rev C, PP1 rev A,
VC3 rev A, CMAP rev E, Heart rev F
unknown, assuming 19" monitor (id 0xf)
Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False
Channel 0:
Origin = (0,0)
Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60)
Video Format Flags: (none)
Sync Disabled
Using Gamma Map 0
Graphics board 1 is "IMPACTSR" graphics.
Managed (":1.0") 1280x1024
Product ID 0x2, 1 GE, 1 RE, 0 TRAMs
MGRAS revision 4, RA revision 0
HQ rev B, GE12 rev A, RE4 rev C, PP1 rev H,
VC3 rev A, CMAP rev F, Heart rev F
unknown, assuming 19" monitor (id 0xf)
(Could not contact X server; thus, no XSGIvc information available)
