Octane R10k 2x250MHz, 256MB, CADduo, GigE

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
User avatar
japes
Donor
Donor
Posts: 1006
Joined: Thu Nov 08, 2007 4:35 pm
Location: Lynnwood, WA

Octane R10k 2x250MHz, 256MB, CADduo, GigE

Unread postby japes » Tue Oct 17, 2017 11:45 pm

This is actually the Octane2 chassis I posted about elsewhere. Dug in a little and found the front plane only seems to accept older style motherboards and one particular new style motherboard I had available to test with. Since I had some bad memory there was some swapping going on and the end config is as follows.

The plastics are the new SGI style, but green and labeled Octane, not Octane2. Lightbar currently is stock, and working, incandescent bulbs.

Loaded up with a pair of ESI graphics, Gigabit Ethernet (machine can't keep up with that), and CADduo. The file /usr/lib/X11/xdm/Xservers.2key is in place of /usr/lib/X11/xdm/Xservers setting the workstation up for two interactive desktop logins.

Code: Select all

duo250 1# hinv -vm
Location: /hw/node
            PM20 Board: barcode GPD388     part 030-1286-002 rev  B
Location: /hw/node/xtalk/15
            IP30 Board: barcode GRT619     part 030-0887-003 rev  M
Location: /hw/node/xtalk/15/pci/2
             FP1 Board: barcode KVH301     part 030-0891-003 rev  G
    PWR.SPPLY.ER Board: barcode AAE0230673 part 060-0035-002 rev  A
Location: /hw/node/xtalk/13
        XTALKPCI Board: barcode JKK323     part 030-0952-005 rev  E
Location: /hw/node/xtalk/13/pci/1
        PCI_ENET Board: barcode JJM218     part 030-1155-002 rev  D
Location: /hw/node/xtalk/12
           MOT10 Board: barcode GSG047     part 030-1241-002 rev  F
Location: /hw/node/xtalk/11
           MOT10 Board: barcode GSG105     part 030-1241-002 rev  F
2 250 MHZ IP30 Processors
Heart ASIC: Revision E
CPU: MIPS R10000 Processor Chip Revision: 3.4
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
Main memory size: 256 Mbytes
Xbow ASIC: Revision 1.4
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 1 Mbyte
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: ESI
Graphics board: ESI
Integral Fast Ethernet: ef0, version 1, pci 2
Fast Ethernet: ef1, version 1, pci 1
Gigabit Ethernet: tg1, PCI slot 3
Iris Audio Processor: version RAD revision 12.0, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 1
  PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 3


I'm not logged in on the second head so board 1 shows unmanaged

Code: Select all

duo250 2# /usr/gfx/gfxinfo -v
Graphics board 0 is "IMPACTSR" graphics.
        Managed (":0.0") 1280x1024
        Product ID 0x2, 1 GE, 1 RE, 0 TRAMs
        MGRAS revision 4, RA revision 0
        HQ rev B, GE12 rev A, RE4 rev C, PP1 rev H,
        VC3 rev A, CMAP rev E, Heart rev E
        unknown, assuming 19" monitor (id 0xf)

        Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False
        Channel 0:
         Origin = (0,0)
         Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60)
         Video Format Flags:  (none)
         Sync Disabled
         Using Gamma Map 0
Graphics board 1 is "IMPACTSR" graphics.
        Unmanaged 1280x1024
        Product ID 0x2, 1 GE, 1 RE, 0 TRAMs
        MGRAS revision 4, RA revision 0
        HQ rev B, GE12 rev A, RE4 rev C, PP1 rev H,
        VC3 rev A, CMAP rev E, Heart rev E
        unknown, assuming 19" monitor (id 0xf)

        Xvc info not available for unmanaged boards
:O3000: :Fuel: :Tezro: :Tezro: :Octane2: :Octane: :Octane: :Indigo: :Indigo: :Indigo: :Indigo: :O2: :1600SW: :O2: :1600SW: :1600SW: :Indigo2: :Indigo2: :Indigo2: :Indigo2: :Indigo2IMP: :Indy: :Indy: :Indy: :Indy: :O3x0: :O3x02L: :O3x02L:

Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 1 guest