Octane R10K 195mhz 256mb

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
Posts: 17
Joined: Thu Nov 12, 2009 11:58 am

Octane R10K 195mhz 256mb

Unread postby weGuru » Sun Jul 16, 2017 6:58 am

Code: Select all

octane 1# hinv -vm
Location: /hw/node
            PM10 Board: barcode DZK234     part 030-0888-004 rev  E
Location: /hw/node/xtalk/15
            IP30 Board: barcode DKV772     part 030-0887-003 rev  F
Location: /hw/node/xtalk/15/pci/2
    PWR.SPPLY.ER Board: barcode AAE8370680 part 060-0035-001 rev  B
             FP1 Board: barcode EBK158     part 030-0891-003 rev  B
Location: /hw/node/xtalk/12
            GM10 Board: barcode EBL718     part 030-0938-003 rev  S
1 195 MHZ IP30 Processor
Heart ASIC: Revision D
CPU: MIPS R10000 Processor Chip Revision: 2.7
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
Main memory size: 256 Mbytes
Xbow ASIC: Revision 1.2
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 1 Mbyte
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: SI
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3

Code: Select all

octane 2# /usr/gfx/gfxinfo -vv
Graphics board 0 is "IMPACTSR" graphics.
        Managed (":0.0") 1280x1024
        Product ID 0x2, 1 GE, 1 RE, 0 TRAMs
        MGRAS revision 1, RA revision 0
        HQ rev B, GE11 rev B, RE4 rev C, PP1 rev A,
        VC3 rev A, CMAP rev E, Heart rev D
        unknown, assuming 19" monitor (id 0xf)

        (Could not contact X server; thus, no XSGIvc information available)
:Indy: R4600 :Indy: R4600 :Indy: R5000 :Indigo2IMP: R10k :O2: R5000 :Octane: R10k :Indigo: R4400
Sun Ultra 10, Sun 220R, Sun 420R, Sun 670MP, Sun E250, Sun IPC, Sun Ultra 60, Sun Ultra Ent 2, Sparcserver 5, IBM R/S 6000 model 590, DEC Vaxstation 4000/90

Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 3 guests