Octane R12k 300MHz, 1GB

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
Posts: 3
Joined: Sun Nov 15, 2015 2:44 pm

Octane R12k 300MHz, 1GB

Unread postby sancho » Wed Jun 28, 2017 1:25 am


I decided to dust off the octane that was sleeping in storage and thought I could post the minimal bits about it.

Code: Select all

sancho@sp95:~$ hinv -vm
Location: /hw/node
      PM10300MHZ Board: barcode KGV311     part 030-1355-001 rev  M
Location: /hw/node/xtalk/15
            IP30 Board: barcode KKP996     part 030-1467-001 rev  D
Location: /hw/node/xtalk/15/pci/2
    PWR.SPPLY.ER Board: barcode AAE0110121 part 060-0035-002 rev  A
             FP1 Board: barcode KBE934     part 030-0891-003 rev  G
Location: /hw/node/xtalk/12
           MOT10 Board: barcode JKT380     part 030-1241-002 rev  H
1 300 MHZ IP30 Processor
Heart ASIC: Revision F
CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 1024 Mbytes
Xbow ASIC: Revision 1.4
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: ESI with texture option
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3

Code: Select all

sancho@sp95:~$ /usr/gfx/gfxinfo
Graphics board 0 is "IMPACTSR" graphics.
        Managed (":0.0") 1280x1024
        Product ID 0x2, 1 GE, 1 RE, 4 TRAMs
        MGRAS revision 4, RA revision 0
        HQ rev B, GE12 rev A, RE4 rev C, PP1 rev H,
        VC3 rev A, CMAP rev F, Heart rev F
        21" monitor (id 0xb)

        (Could not contact X server; thus, no XSGIvc information available)

I was connected remotely as I don't have any PS2 mouse anymore and the USB adaptors I tried don't work for the mouse, they all work for the keyboard though. I keep looking for PS2 mice on second hand shops just in case.

I'll post a picture later on. The light bar revival mod was done 2 years ago with the HD replacement with a "huge" 36GB :

Code: Select all

sp95 2# diskpatch -v
sc0d1l0:  Disk         SEAGATE ST336704LC      0003  Serial: 3CD007VF

I haven't reinstalled the system as I don't have medias nor images so it is as it was when I bought it a few years ago.
I'll post a picture next weekend.


User avatar
Posts: 3361
Joined: Sun Mar 18, 2007 3:25 pm
Location: Minneapolis, Minnesota USA

Re: Octane R12k 300MHz, 1GB

Unread postby vishnu » Wed Jul 05, 2017 12:29 pm

A 1.4 xbow, very nice! Which power supply does it have?
Temporarily lost at sea...
World domination! Or something...

:Tezro: :Octane2:

Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 2 guests