Page 1 of 1

FUEL V12 R16000 800MHz 4GB

Posted: Sat Jun 24, 2017 3:07 am
by uunix
I thought I had done a hinv for this machine some years back. Can't find it and now it's had a V12 fitted. Apart from the CPU could go up a notch to 900MHz (which I couldn't see a need), this machine is pretty top notch now,V12, LTO tape, DM6 (Pointless so far) etc

Code: Select all

1 800 MHZ IP35 Processor
CPU: MIPS R16000 Processor Chip Revision: 2.2
FPU: MIPS R16010 Floating Point Chip Revision: 2.2
CPU 0 at Module 001c01/Slot 0/Slice A: 800 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.2. Scache: Size 4 MB Speed 400 Mhz  Tap 0xa
Main memory size: 4096 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 001c01/Slot 0: 4096 MB (enabled)
  Bank 0 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 1 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 2 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 3 contains 1024 MB (Premium) DIMMS (enabled)
Integral SCSI controller 3: Version SAS/SATA LS1068
Integral SCSI controller 0: Version QL12160, low voltage differential
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
  Tape drive: unit 8 on SCSI controller 0: unknown
Integral SCSI controller 1: Version QL12160, single ended
  CDROM: unit 4 on SCSI controller 1
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V12
Gigabit Ethernet: eg0, module 001c01, pci_bus 1, pci_slot 3, firmware version 0.                                                                  0.0
Integral Fast Ethernet: ef0, version 1, module 001c01, pci 4
Iris Audio Processor: version MAD revision 1, number 1
  PCI Adapter ID (vendor 0x10ee, device 0xd151) PCI slot 1
  PCI Adapter ID (vendor 0x1000, device 0x0054) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1
  PCI Adapter ID (vendor 0x1412, device 0x1724) PCI slot 2
  PCI Adapter ID (vendor 0x10a9, device 0x0009) PCI slot 3
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 4
  PCI Adapter ID (vendor 0x1045, device 0xc861) PCI slot 5
SD-DIGVID Standard Definition Digital Video: unit 0, revision 2.75.0
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c01/Slot n0: Revision 6.210
USB controller: type OHCI


and video

Code: Select all

Graphics board 0 is "ODYSSEY" graphics.
        Managed (":0.0") 1600x1200
        BUZZ version B.1
        PB&J version 1
        128MB memory
                Banks: 4, CAS latency: 3
         Monitor 0 type: DEL -24544
        Channel 0:
         Origin = (0,0)
         Video Output: 1600 pixels, 1200 lines, 59.83Hz (1600x1200_60)

Re: FUEL V12 R16000 800MHz 4GB

Posted: Sat Jun 24, 2017 4:18 am
by johnnym
Pictures please! :)

Re: FUEL V12 R16000 800MHz 4GB

Posted: Sat Jun 24, 2017 8:21 am
by Trippynet
Very nice system indeed!

Re: FUEL V12 R16000 800MHz 4GB

Posted: Sat Jun 24, 2017 6:52 pm
by vishnu
Deluxe! :mrgreen: Can I have it? :lol: