FUEL V12 R16000 800MHz 4GB

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
User avatar
Posts: 1991
Joined: Sun Mar 27, 2011 12:48 pm
Location: Stourbridge / England / UK

FUEL V12 R16000 800MHz 4GB

Unread postby uunix » Sat Jun 24, 2017 3:07 am

I thought I had done a hinv for this machine some years back. Can't find it and now it's had a V12 fitted. Apart from the CPU could go up a notch to 900MHz (which I couldn't see a need), this machine is pretty top notch now,V12, LTO tape, DM6 (Pointless so far) etc

Code: Select all

1 800 MHZ IP35 Processor
CPU: MIPS R16000 Processor Chip Revision: 2.2
FPU: MIPS R16010 Floating Point Chip Revision: 2.2
CPU 0 at Module 001c01/Slot 0/Slice A: 800 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.2. Scache: Size 4 MB Speed 400 Mhz  Tap 0xa
Main memory size: 4096 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 001c01/Slot 0: 4096 MB (enabled)
  Bank 0 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 1 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 2 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 3 contains 1024 MB (Premium) DIMMS (enabled)
Integral SCSI controller 3: Version SAS/SATA LS1068
Integral SCSI controller 0: Version QL12160, low voltage differential
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
  Tape drive: unit 8 on SCSI controller 0: unknown
Integral SCSI controller 1: Version QL12160, single ended
  CDROM: unit 4 on SCSI controller 1
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V12
Gigabit Ethernet: eg0, module 001c01, pci_bus 1, pci_slot 3, firmware version 0.                                                                  0.0
Integral Fast Ethernet: ef0, version 1, module 001c01, pci 4
Iris Audio Processor: version MAD revision 1, number 1
  PCI Adapter ID (vendor 0x10ee, device 0xd151) PCI slot 1
  PCI Adapter ID (vendor 0x1000, device 0x0054) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1
  PCI Adapter ID (vendor 0x1412, device 0x1724) PCI slot 2
  PCI Adapter ID (vendor 0x10a9, device 0x0009) PCI slot 3
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 4
  PCI Adapter ID (vendor 0x1045, device 0xc861) PCI slot 5
SD-DIGVID Standard Definition Digital Video: unit 0, revision 2.75.0
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c01/Slot n0: Revision 6.210
USB controller: type OHCI

and video

Code: Select all

Graphics board 0 is "ODYSSEY" graphics.
        Managed (":0.0") 1600x1200
        BUZZ version B.1
        PB&J version 1
        128MB memory
                Banks: 4, CAS latency: 3
         Monitor 0 type: DEL -24544
        Channel 0:
         Origin = (0,0)
         Video Output: 1600 pixels, 1200 lines, 59.83Hz (1600x1200_60)
Hey Ho! Pip & Dandy!
:Tezro: :Octane2: :O2: :Indigo: :Indy:

User avatar
Posts: 223
Joined: Sun Sep 04, 2016 9:53 pm

Re: FUEL V12 R16000 800MHz 4GB

Unread postby johnnym » Sat Jun 24, 2017 4:18 am

Pictures please! :)
:Indigo: :Indy: :O2: :Octane: :Octane2: :O200: = :O200: - :O200: = :O200: (O200 cluster w/2 GIGAchannel cabinets)
[ ( hp ) ] 712/80 c3000 (dead) :hpserv: (J5600) c3700 c3750 c8000 rp2470 rp3440 :rx2600: (rx2620) rx2660 rx4640
| d | i | g | i | t | a | l | AXPpci33 AlphaStation 200 AlphaStation 255 PWS 500au AlphaServer DS20E AlphaServer DS25
C O B A L T Qube 2 Qube 3 RaQ RaQ 2 RaQ 4r RaQ XTR

User avatar
Posts: 892
Joined: Thu Aug 15, 2013 6:22 am
Location: Aberdeen, Scotland, UK

Re: FUEL V12 R16000 800MHz 4GB

Unread postby Trippynet » Sat Jun 24, 2017 8:21 am

Very nice system indeed!
Systems in use:
:Indigo2IMP: - Nitrogen: R10000 195MHz CPU, 384MB RAM, SolidIMPACT Graphics, 36GB 15k HDD & 300GB 10k HDD, 100Mb/s NIC, New/quiet fans, IRIX 6.5.22
:Fuel: - Lithium: R14000 600MHz CPU, 4GB RAM, V10 Graphics, 72GB 15k HDD & 300GB 10k HDD, 1Gb/s NIC, New/quiet fans, IRIX 6.5.30
Other system in storage: :O2: R5000 200MHz, 224MB RAM, 72GB 15k HDD, PSU fan mod, IRIX 6.5.30

User avatar
Posts: 3361
Joined: Sun Mar 18, 2007 3:25 pm
Location: Minneapolis, Minnesota USA

Re: FUEL V12 R16000 800MHz 4GB

Unread postby vishnu » Sat Jun 24, 2017 6:52 pm

Deluxe! :mrgreen: Can I have it? :lol:
Temporarily lost at sea...
World domination! Or something...

:Tezro: :Octane2:

Return to “SGI: hinv”

Who is online

Users browsing this forum: Irinikus and 3 guests