Indigo2 R10K/195MHz| 1GB | HI-AA w/ TRAM | EISA 100Mb | I2 Video

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
User avatar
archaic
Posts: 351
Joined: Mon Mar 08, 2004 9:28 pm
Location: Houston, TX

Indigo2 R10K/195MHz| 1GB | HI-AA w/ TRAM | EISA 100Mb | I2 Video

Unread postby archaic » Wed Mar 22, 2017 8:22 pm

Code: Select all

FPU: MIPS R10010 Floating Point Chip Revision: 0.0
CPU: MIPS R10000 Processor Chip Revision: 2.5
1 195 MHZ IP28 Processor
Main memory size: 1024 Mbytes
Secondary unified instruction/data cache size: 1 Mbyte
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Integral SCSI controller 0: Version WD33C93B, revision D
  Disk drive: unit 1 on SCSI controller 0
  Tape drive: unit 2 on SCSI controller 0: DAT
  CDROM: unit 6 on SCSI controller 0
Integral SCSI controller 1: Version WD33C93B, revision D
On-board serial ports: 2
On-board bi-directional parallel port
Graphics board: High-AA Impact/TRAM option card
Integral Ethernet: ec0, version 1
Iris Audio Processor: version A2 revision 1.1.0
Indigo2 video (ev1): unit 0, revision 4.   
EISA bus: adapter 0



Code: Select all

Graphics board 0 is "IMPACTPC" graphics.
   Managed (":0.0") 1280x1024
   Product ID 0x0, 2 GEs, 1 RE, 4 TRAMs
   MGRAS revision 3, RA revision 5
   HQ rev A, GE11 rev B, RE4 rev A, PP1 rev A,
   VC3 rev A, CMAP rev DMC rev D
   21" monitor (id 0xb)
   Video board present

   Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False
   Channel 0:
    Origin = (0,0)
    Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60)
    Video Format Flags:  (none)
    Sync Disabled
    Using Gamma Map 0
Patrick

- You have got to be kidding... -

User avatar
Trippynet
Donor
Donor
Posts: 678
Joined: Thu Aug 15, 2013 6:22 am
Location: Aberdeen, Scotland, UK

Re: Indigo2 R10K/195MHz| 1GB | HI-AA w/ TRAM | EISA 100Mb | I2 Video

Unread postby Trippynet » Thu Mar 23, 2017 1:43 am

Nice little system you've got there, very nice in fact! Any chance of some pictures?
Systems in use:
:Indigo2IMP: - Nitrogen: R10000 195MHz CPU, 384MB RAM, SolidIMPACT Graphics, 36GB 15k HDD & 300GB 10k HDD, 100Mb/s NIC, New/quiet fans, IRIX 6.5.22
:Fuel: - Lithium: R14000 600MHz CPU, 4GB RAM, V10 Graphics, 72GB 15k HDD & 300GB 10k HDD, 1Gb/s NIC, New/quiet fans, IRIX 6.5.30
Other system in storage: :O2: R5000 200MHz, 224MB RAM, 72GB 15k HDD, PSU fan mod, IRIX 6.5.30

User avatar
vishnu
Donor
Donor
Posts: 2994
Joined: Sun Mar 18, 2007 3:25 pm
Location: Minneapolis, Minnesota USA

Re: Indigo2 R10K/195MHz| 1GB | HI-AA w/ TRAM | EISA 100Mb | I2 Video

Unread postby vishnu » Fri Mar 24, 2017 10:22 am

A gig of ram! And a tape drive! Nice... :mrgreen:
Project:
Temporarily lost at sea...
Plan:
World domination! Or something...

:Tezro: :Octane2:

User avatar
archaic
Posts: 351
Joined: Mon Mar 08, 2004 9:28 pm
Location: Houston, TX

Re: Indigo2 R10K/195MHz| 1GB | HI-AA w/ TRAM | EISA 100Mb | I2 Video

Unread postby archaic » Thu Mar 30, 2017 6:38 pm

Trippynet wrote:Nice little system you've got there, very nice in fact! Any chance of some pictures?



I am currently having an issue with my photobucket. I will get some pictures posted up later.


Patrick
Patrick

- You have got to be kidding... -


Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 1 guest