Octane V12 2x600MHz 1GB

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
User avatar
uunix
Donor
Donor
Posts: 1548
Joined: Sun Mar 27, 2011 12:48 pm
Location: Stourbridge / England / UK

Octane V12 2x600MHz 1GB

Unread postby uunix » Sat Mar 18, 2017 1:00 pm

So some time back I brought a single 300MHz Octane with V8 from chickenue.
Well thanks to jmc, it has been upgraded today.

Code: Select all

OCTANE03 1# hinv -v
2 600 MHZ IP30 Processors
Heart ASIC: Revision F
CPU: MIPS R14000 Processor Chip Revision: 2.4
FPU: MIPS R14010 Floating Point Chip Revision: 0.0
Main memory size: 1024 Mbytes
Xbow ASIC: Revision 1.4
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
  Disk drive: unit 3 on SCSI controller 0 (unit 3)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V12
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3
Dual Channel Display


Code: Select all

OCTANE03 2# /usr/gfx/gfxinfo
Graphics board 0 is "ODYSSEY" graphics.
        Managed (":0.0") 1280x1024
        BUZZ version B.1
        PB&J version 1
        128MB memory
                Banks: 4, CAS latency: 3
         Monitor 0 type: Unknown
        Dual Channel Display option
         Monitor 1 type: Unknown         Monitor 2 type: Unknown
        Channel 0:
         Origin = (0,0)
         Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60)


Monday, I have another upgrade to an Octane2 with 1.3 XBOW with some interesting stuff.
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:Fuel: :Octane2: :O2: :Indigo: :Indy:
-----------------------------------------------------------------------

User avatar
vishnu
Donor
Donor
Posts: 2992
Joined: Sun Mar 18, 2007 3:25 pm
Location: Minneapolis, Minnesota USA

Re: Octane V12 2x600MHz 1GB

Unread postby vishnu » Mon Mar 20, 2017 7:25 am

Ah! The dreaded Dual Channel Display option, do you have it working?
Project:
Temporarily lost at sea...
Plan:
World domination! Or something...

:Tezro: :Octane2:

User avatar
recondas
Moderator
Moderator
Posts: 5424
Joined: Sun Jun 06, 2004 5:55 pm
Location: NC - USA

Re: Octane V12 2x600MHz 1GB

Unread postby recondas » Mon Mar 20, 2017 4:17 pm

Nice Octane, congratulations.
***********************************************************************
Welcome to ARMLand - 0/0x0d00
running...(sherwood-root 0607201829)
* InfiniteReality/Reality Software, IRIX 6.5 Release *
***********************************************************************


Return to “SGI: hinv”

Who is online

Users browsing this forum: Ahrefs [Bot] and 1 guest