SGI crimson #2

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
MrBill
Posts: 272
Joined: Fri Dec 28, 2012 12:50 pm
Location: Vero Beach, Florida

SGI crimson #2

Unread postby MrBill » Wed Mar 01, 2017 7:53 pm

Code: Select all

IRIX Release 5.3 IP17 crimson
Copyright 1987-1994 Silicon Graphics, Inc. All Rights Reserved.
Last login: Thu Dec 31 16:56:41 PST 1998 by UNKNOWN@192.168.1.8
crimson 1# hinv -vv
1 100 MHZ IP17 Processor
FPU: MIPS R4010 Floating Point Chip Revision: 0.0
CPU: MIPS R4000 Processor Chip Revision: 2.2
On-board serial ports: 4
Data cache size: 8 Kbytes
Instruction cache size: 8 Kbytes
Secondary unified instruction/data cache size: 1 Mbyte
Main memory size: 128 Mbytes
I/O board, slot F: IO3B
RealityEngine Graphics option installed
Integral Ethernet: et0, IO3
Integral SCSI controller 1: Version WD33C93A, revision 9
Integral SCSI controller 0: Version WD33C93A, revision 9
CDROM: unit 3 on SCSI controller 0
Disk drive: unit 1 on SCSI controller 0
VME bus: adapter 0
crimson 2#


It lives.
:Octane: :Octane: :Octane: :Octane2: :Indy: :Indy: :Indigo: :Indigo2: :Crimson:Image :Tezro: :Tezro: :Onyx2: :Onyx2: :Onyx: :OnyxR: :BA213:

User avatar
foetz
Moderator
Moderator
Posts: 6593
Joined: Mon Apr 14, 2003 4:34 am
Contact:

Re: SGI crimson #2

Unread postby foetz » Thu Mar 02, 2017 2:00 am

you have 2 crimsons? :shock:

User avatar
jan-jaap
Donor
Donor
Posts: 4940
Joined: Thu Jun 17, 2004 11:35 am
Location: Wijchen, The Netherlands
Contact:

Re: SGI crimson #2

Unread postby jan-jaap » Thu Mar 02, 2017 2:35 am

Nice!

Is that the one you wanted to run IRIX 6.2 on?
:PI: :Indigo: :Indigo: :Indy: :Indy: :Indy: :Indigo2: :Indigo2: :Indigo2IMP: :Octane: :Octane2: :O2: :O2+: Image :Fuel: :Tezro: :4D70G: :Skywriter: :PWRSeries: :Crimson: :ChallengeL: :Onyx: :O200: :Onyx2: :O3x02L:
To accentuate the special identity of the IRIS 4D/70, Silicon Graphics' designers selected a new color palette. The machine's coating blends dark grey, raspberry and beige colors into a pleasing harmony. (IRIS 4D/70 Superworkstation Technical Report)

MrBill
Posts: 272
Joined: Fri Dec 28, 2012 12:50 pm
Location: Vero Beach, Florida

Re: SGI crimson #2

Unread postby MrBill » Thu Mar 02, 2017 9:16 am

foetz wrote:you have 2 crimsons? :shock:


yeah, a little shocked myself. Parts are expensive, gotta stock up.

I do intend to get irix 6.2 installed once i can get the install media to cooperate.

The other crimson does apear partly functional, the io3 board throws errors at bootup, however one chanel still does function, might be able to get it running, or some kind of net boot setup again.
:Octane: :Octane: :Octane: :Octane2: :Indy: :Indy: :Indigo: :Indigo2: :Crimson:Image :Tezro: :Tezro: :Onyx2: :Onyx2: :Onyx: :OnyxR: :BA213:

User avatar
khalidschofield
Posts: 542
Joined: Thu May 06, 2004 6:18 am

Re: SGI crimson #2

Unread postby khalidschofield » Tue Mar 07, 2017 1:55 pm

Great system! Glad it still runs
############################
Re-install with OpenBSD :)


Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 1 guest