Rackmount Tezro, 2x R16K/1GHz (16MB), 2GB, V10, CDRW, SAS 3800X, QLA12160, Revolution 7.1

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
User avatar
mapesdhs
Posts: 2441
Joined: Mon Nov 10, 2003 4:17 pm
Location: Edinburgh, Scotland
Contact:

Rackmount Tezro, 2x R16K/1GHz (16MB), 2GB, V10, CDRW, SAS 3800X, QLA12160, Revolution 7.1

Unread postby mapesdhs » Thu Jan 19, 2017 6:27 pm

My Fuel has served me well, but it was time to move on, sold it for a good price, replaced with a rackmount Tezro with gfx-mod courtesy of the most awesome mopar5150. Here's a picture:

Image

The Fuel had a lot of internal devices, especially storage; these had to be external for the Tezro. With a budget of zero, I made use of an old DLT case and SCSI case to hold two IcyDock units, each with 4x 2.5" bays; these are connected to an LSI SAS3800X. The larger DLT case holds a CDRW aswell, connected to the built-in SCSI port.

Some of the SATA devices are temporary (several 240GB Vertex2Es, V2E for short) while I run tests to determine the best final options (I have a substantial range to test), though I've not yet found any SSD faster than the V2E since all newer SATA3s tend to end up with the wrong link speed with LSI 1030/1060 cards in SGIs, often running at 1.5Gbit instead of 3Gbit.

Not yet connected is a Sony DDS4 to one of the other SCSI ports.

The Fuel had a dual-SSD split file system (root on a 60GB V2E in an ARS-2160H, /usr and /var on a 120GB V2E connected to a SAS3442X-R), but I couldn't use the ARS box in the Tezro as it's the 68pin version, so for the moment the OS has been cloned onto a 146GB 15K. The 120GB is in one of the IcyDocks (DLT case), I'll setup the SSD file system split again once I've sorted out a spare ARS-2160 SCA unit. In the same IcyDock is a 240GB V2E which holds my main user account. The other two bays will eventully hold a two 1TB SSDs (240GB V2E standins just now for testing) which replace a Seagate 600GB 15K SAS (CD dumps/images, OS images, sw archive, etc.) and 1TB Samsung F3 SATA (video archive) I had in the Fuel.

The other IcyDock (in a smaller case on its own) is for backup, containg 120GB and 240GB V2Es for the OS and user account, and two cheaper laptop-type SATA drives for backup of the 1TB SSDs that'll be in the main IcyDock, though one of them is a temp 750GB just for testing and making sure the unit handles the power draw ok

Here's a picture of the rear, which isn't yet finished (couple of blanking plates to fit):

Image

Power to the whole setup is via a radio-controlled switch, so no need to reach fiddly switches at the back of the cases. Now for the obligatory info...

hinv:

Code: Select all

2 1.0 GHZ IP35 Processors
CPU: MIPS R16000 Processor Chip Revision: 3.0
FPU: MIPS R16010 Floating Point Chip Revision: 3.0
Main memory size: 2048 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 16 Mbytes
Integral SCSI controller 2: Version IDE (ATA/ATAPI) IOC4
  CDROM: unit 0 on SCSI controller 2
Integral SCSI controller 3: Version SAS/SATA LS1068
  Disk drive: unit 0 on SCSI controller 3
  Disk drive: unit 1 on SCSI controller 3
  Disk drive: unit 2 on SCSI controller 3
  Disk drive: unit 3 on SCSI controller 3
  Disk drive: unit 4 on SCSI controller 3
  Disk drive: unit 5 on SCSI controller 3
  Disk drive: unit 6 on SCSI controller 3
  Disk drive: unit 7 on SCSI controller 3
Integral SCSI controller 0: Version QL12160, low voltage differential
  Disk drive: unit 1 on SCSI controller 0
Integral SCSI controller 1: Version QL12160, single ended
  CDROM: unit 3 on SCSI controller 1
Integral SCSI controller 4: Version QL12160, low voltage differential
Integral SCSI controller 5: Version QL12160, low voltage differential
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3/IOC4 serial port: tty5
IOC3/IOC4 serial port: tty6
Graphics board: V10
Integral Gigabit Ethernet: tg0, module 001c18, PCI bus 1 slot 4
Iris Audio Processor: version MAD revision 1, number 1
IOC3/IOC4 external interrupts: 1



hinv -vm:

Code: Select all

Location: /hw/module/001c18/node
       IP59_2CPU Board: barcode NSC662     part 030-2059-002 rev -B
Location: /hw/module/001c18/IXbrick/xtalk/12
       ASTODYV10 Board: barcode NAV677     part 030-1826-001 rev -B
Location: /hw/module/001c18/IXbrick/xtalk/15
       2U_INT_53 Board: barcode NFE417     part 030-1809-004 rev -A
Location: /hw/module/001c18/IXbrick/xtalk/15/pci-x/0/1/ioc4
             IO9 Board: barcode NDZ731     part 030-1771-005 rev -A
2 1.0 GHZ IP35 Processors
CPU: MIPS R16000 Processor Chip Revision: 3.0
FPU: MIPS R16010 Floating Point Chip Revision: 3.0
CPU 0 at Module 001c18/Slot 0/Slice A: 1.0 Ghz MIPS R16000 Processor Chip (enabled)
  Processor revision: 3.0. Scache: Size 16 MB Speed 333 Mhz  Tap 0x15
CPU 1 at Module 001c18/Slot 0/Slice C: 1.0 Ghz MIPS R16000 Processor Chip (enabled)
  Processor revision: 3.0. Scache: Size 16 MB Speed 333 Mhz  Tap 0x15
Main memory size: 2048 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 16 Mbytes
Memory at Module 001c18/Slot 0: 2048 MB (enabled)
  Bank 0 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 1 contains 1024 MB (Premium) DIMMS (enabled)
Integral SCSI controller 2: Version IDE (ATA/ATAPI) IOC4
  CDROM: unit 0 on SCSI controller 2
Integral SCSI controller 3: Version SAS/SATA LS1068
  Disk drive: unit 0 on SCSI controller 3 (unit 0)
  Disk drive: unit 1 on SCSI controller 3 (unit 1)
  Disk drive: unit 2 on SCSI controller 3 (unit 2)
  Disk drive: unit 3 on SCSI controller 3 (unit 3)
  Disk drive: unit 4 on SCSI controller 3 (unit 4)
  Disk drive: unit 5 on SCSI controller 3 (unit 5)
  Disk drive: unit 6 on SCSI controller 3 (unit 6)
  Disk drive: unit 7 on SCSI controller 3 (unit 7)
Integral SCSI controller 0: Version QL12160, low voltage differential
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL12160, single ended
  CDROM: unit 3 on SCSI controller 1
Integral SCSI controller 4: Version QL12160, low voltage differential
Integral SCSI controller 5: Version QL12160, low voltage differential
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3/IOC4 serial port: tty5
IOC3/IOC4 serial port: tty6
Graphics board: V10
Integral Gigabit Ethernet: tg0, module 001c18, PCI bus 1 slot 4
Iris Audio Processor: version MAD revision 1, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x100a) PCI slot 1
  PCI Adapter ID (vendor 0x1000, device 0x0054) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 3
  PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 4
  PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1
  PCI Adapter ID (vendor 0x1412, device 0x1724) PCI slot 2
IOC4 firmware revision 79
IOC3/IOC4 external interrupts: 1
HUB in Module 001c18/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c18/Slot n0: Revision 6.210



gfxinfo (no need for a V12):

Code: Select all

Graphics board 0 is "ODYSSEY" graphics.
        Managed (":0.0") 1920x1200
        BUZZ version B.1
        PB&J version 1
        32MB memory
                Banks: 2, CAS latency: 3
         Monitor 0 type: HWP 9974
        Channel 0:
         Origin = (0,0)
         Video Output: 1920 pixels, 1200 lines, 60.02Hz (1920x1200_60)



diskpatch -v:

Code: Select all

sc0d1l0:  Disk         COMPAQ  BF1468B26B      HPB9  Serial: 3LN0AM12
sc3d0l0:  Disk         ATA     OCZ-VERTEX2     1.37  Serial: OCZ
sc3d1l0:  Disk         ATA     OCZ-VERTEX2     1.37  Serial: OCZ
sc3d2l0:  Disk         ATA     OCZ-VERTEX2     1.37  Serial: OCZ
sc3d3l0:  Disk         ATA     OCZ-VERTEX2     1.37  Serial: OCZ
sc3d4l0:  Disk         ATA     OCZ-VERTEX2     1.37  Serial: OCZ
sc3d5l0:  Disk         ATA     Hitachi HTS54101A480  Serial: J8100076
sc3d6l0:  Disk         ATA     OCZ-VERTEX2     1.37  Serial: OCZ
sc3d7l0:  Disk         ATA     Hitachi HTS72757A0D0  Serial: J3740084



To do: mod the fans! Atm the Tezro itself is way too loud, but that's for the future. Also need to rig up the audio.

Ian.
I'm working on a charitable PC build for the Learn Engineering YouTube channel. Please PM/email/call if you'd like to contribute! Donations of items I can sell to provide funds are also welcome.
mapesdhs@yahoo.com
+44 (0)131 476 0796
+44 (0)7434 635 121

Y888099
Posts: 426
Joined: Mon Jul 11, 2016 11:00 am

Re: Rackmount Tezro, 2x R16K/1GHz (16MB), 2GB, V10, CDRW, SAS 3800X, QLA12160, Revolution 7.1

Unread postby Y888099 » Fri Jan 20, 2017 8:25 am

mapesdhs wrote:Power to the whole setup is via a radio-controlled switch, so no need to reach fiddly switches at the back of the cases.


More info, please :D
Head Full of Snow. Lemon Scented You

User avatar
Titox
Posts: 263
Joined: Tue Aug 14, 2007 12:13 am
Location: Spain

Re: Rackmount Tezro, 2x R16K/1GHz (16MB), 2GB, V10, CDRW, SAS 3800X, QLA12160, Revolution 7.1

Unread postby Titox » Fri Jan 20, 2017 11:45 am

We need more pics!!!!
Alberto (Between the TV and the sofa)
:Fuel: :Octane2: :1600SW: :O2: :O2: :1600SW:
http://www.f3b.es
http://unixverse.blogspot.com

User avatar
vishnu
Donor
Donor
Posts: 3064
Joined: Sun Mar 18, 2007 3:25 pm
Location: Minneapolis, Minnesota USA

Re: Rackmount Tezro, 2x R16K/1GHz (16MB), 2GB, V10, CDRW, SAS 3800X, QLA12160, Revolution 7.1

Unread postby vishnu » Fri Jan 20, 2017 3:36 pm

mapesdhs wrote:...a rackmount Tezro with gfx-mod courtesy of the most awesome mopar5150.


That reminds me I got an Onyx4 6x1Ghz/ 16g/ 2x 143g/ V12/ DVD/ m-audio system from the most awesome mopar5150 that I need to post an hinv for. Yes, I just ended that sentence with a preposition... 8-)
Project:
Temporarily lost at sea...
Plan:
World domination! Or something...

:Tezro: :Octane2:

User avatar
mapesdhs
Posts: 2441
Joined: Mon Nov 10, 2003 4:17 pm
Location: Edinburgh, Scotland
Contact:

Re: Rackmount Tezro, 2x R16K/1GHz (16MB), 2GB, V10, CDRW, SAS 3800X, QLA12160, Revolution 7.1

Unread postby mapesdhs » Fri Jan 20, 2017 3:44 pm

I can't take any new pics as it's all setup now, but I did take a few before putting it together (and after the cards went in):

Image
Image
Image


Y888099 asked about power; not much to say really, visually it's just a 4-way 13A mains extension unit, but it comes with a small 5-button radio remote control. Each socket can be individually turned on/off, or the 5th button turns all sockets on/off. The unit uses coded pairing with the remote, so it's possible to setup one remote that controls multiple units, or multiple remotes for a single unit (eg. several family members). The idea is that when I'm not using the system then power is fully off, so no wasted standby power. and then when I do want to use the system I don't have to reach round the back of the boxes since they're a bit hard to get at (my PC oc/benching testing area is in the way). So pressing one button on the remote allows the external units to power up, and meanwhile the Tezro becomes ready. After a few seconds I press the main button on the Tezro.

Not sure if they're sold elsewhere, but in the UK the radio controlled mains extension units were sold by Maplin. They were normally quite expensive, but I bought half a dozen when Maplin suddenly had them in store for half-price, so mine were about 15 UKP each.

Ian.
I'm working on a charitable PC build for the Learn Engineering YouTube channel. Please PM/email/call if you'd like to contribute! Donations of items I can sell to provide funds are also welcome.
mapesdhs@yahoo.com
+44 (0)131 476 0796
+44 (0)7434 635 121

User avatar
japes
Donor
Donor
Posts: 965
Joined: Thu Nov 08, 2007 4:35 pm
Location: Lynnwood, WA

Re: Rackmount Tezro, 2x R16K/1GHz (16MB), 2GB, V10, CDRW, SAS 3800X, QLA12160, Revolution 7.1

Unread postby japes » Fri Jan 20, 2017 7:04 pm

Keeping the power disconnected when the Tezro/Origin350/Onyx350/IP35 2U wonder machine is probably smart. I noticed if I left the Origin350 in standby something causes one of the environmental sensors to get to/beyond the high temp threshold. I didn't look into it much or don't remember if it was the L1 controller or a PSU - not much besides that in there. It cools off quickly when powered on but registers an alarm and causes the fans to run at high speed right from startup.

What does the Tezro do in your workflow? hold all your IRIX software and network installs I'm guessing. Does it do anything else fun?

EDIT: Hey, is that a SGI logo from a SGI rack door? is that powersupply to power it?
:O3000: :Fuel: :Tezro: :Tezro: :Octane2: :Octane2: :Octane2: :Octane: :Octane: :Octane: :Indigo: :Indigo: :Indigo: :Indigo: :O2: :1600SW: :O2: :1600SW: :1600SW: :Indigo2: :Indigo2: :Indigo2: :Indigo2: :Indigo2IMP: :Indy: :Indy: :Indy: :Indy: :O3x0: :O3x02L: :O3x02L:

User avatar
mapesdhs
Posts: 2441
Joined: Mon Nov 10, 2003 4:17 pm
Location: Edinburgh, Scotland
Contact:

Re: Rackmount Tezro, 2x R16K/1GHz (16MB), 2GB, V10, CDRW, SAS 3800X, QLA12160, Revolution 7.1

Unread postby mapesdhs » Sat Jan 21, 2017 9:09 am

japes writes:
> Keeping the power disconnected when the Tezro/Origin350/Onyx350/IP35 2U wonder machine is probably smart. ...

For me it's more about power consumption, practicality, and the visual irritation of a veritable galaxy of LEDs which are annoying when I'm trying to play E.D. :D


> What does the Tezro do in your workflow? hold all your IRIX software and network installs I'm guessing. Does it do anything else fun?

Holds my main email archive, all web site data, earlier picture/video archive (newer HD stuff is on a 5GHz PC), disk images, CD images and dumps, and acts as an installation server. Honestly I would use an O2 if it were fast enough, but it's sadly not, and the SSDs do make searching my email archive considerably faster.


> EDIT: Hey, is that a SGI logo from a SGI rack door? is that powersupply to power it?

Yes and yes. Haven't decided where to put it yet. It was a gift from one of the resellers.

Ian.
I'm working on a charitable PC build for the Learn Engineering YouTube channel. Please PM/email/call if you'd like to contribute! Donations of items I can sell to provide funds are also welcome.
mapesdhs@yahoo.com
+44 (0)131 476 0796
+44 (0)7434 635 121

Hombre71
Donor
Donor
Posts: 54
Joined: Wed Sep 14, 2016 4:10 am
Location: The Netherlands

Re: Rackmount Tezro, 2x R16K/1GHz (16MB), 2GB, V10, CDRW, SAS 3800X, QLA12160, Revolution 7.1

Unread postby Hombre71 » Mon Jan 23, 2017 2:13 pm

Out of interest, can the Tezro (and for that matter the Fuel) boot from Sata? Or do you always still need a ScSi disk for that?

User avatar
uunix
Donor
Donor
Posts: 1658
Joined: Sun Mar 27, 2011 12:48 pm
Location: Stourbridge / England / UK

Re: Rackmount Tezro, 2x R16K/1GHz (16MB), 2GB, V10, CDRW, SAS 3800X, QLA12160, Revolution 7.1

Unread postby uunix » Mon Jan 23, 2017 2:33 pm

Hombre71 wrote:Out of interest, can the Tezro (and for that matter the Fuel) boot from Sata? Or do you always still need a ScSi disk for that?

Must boot from SCSI.
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:Fuel: :Octane2: :O2: :Indigo: :Indy:
-----------------------------------------------------------------------

User avatar
mapesdhs
Posts: 2441
Joined: Mon Nov 10, 2003 4:17 pm
Location: Edinburgh, Scotland
Contact:

Re: Rackmount Tezro, 2x R16K/1GHz (16MB), 2GB, V10, CDRW, SAS 3800X, QLA12160, Revolution 7.1

Unread postby mapesdhs » Mon Jan 23, 2017 3:41 pm

That's why the SSD is inside an ARS-2160 SCSI/SATA bridge box, but /usr and /var come from a SAS card attached LSI, so all accesses to those areas are fast, which normally includes /usr/people aswell, but I have a separate SSD for my user account.

Ian.
I'm working on a charitable PC build for the Learn Engineering YouTube channel. Please PM/email/call if you'd like to contribute! Donations of items I can sell to provide funds are also welcome.
mapesdhs@yahoo.com
+44 (0)131 476 0796
+44 (0)7434 635 121


Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 1 guest