O2+, R12k 400Mhz, 512MB, CRM

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
irix7
Posts: 14
Joined: Sat Nov 26, 2016 3:36 pm

O2+, R12k 400Mhz, 512MB, CRM

Unread postby irix7 » Thu Dec 22, 2016 4:14 pm

My first eBay find, no issues at all since. Swapped the HDD for an ACARD with an SSD (had to use the "force single-ended" jumper to make it work.) Will be used for testing builds/scripts.

I'm using a Startech.com (VGA2HDU) VGA to HDMI adaptor without issue, though it's a bit blurry. The USB power in is apparently unneeded. I also have a Black Box (KVUSB-PS2) PS2 to USB adaptor with an Apple USB keyboard and optical mouse connected. Works fine including 3-button support! So if you have modern peripherals it's possible to connect an O2 to them.

hinv -mv

Code: Select all

CPU: MIPS R12000 Processor Chip Revision: 3.5
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
1 400 MHZ IP32 Processor
Main memory size: 512 Mbytes
Secondary unified instruction/data cache size: 2 Mbytes on Processor 0
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
FLASH PROM version 4.18
Integral SCSI controller 0: Version ADAPTEC 7880
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
Integral SCSI controller 1: Version ADAPTEC 7880
On-board serial ports: tty1
On-board serial ports: tty2
On-board EPP/ECP parallel port
CRM graphics installed
Integral Ethernet: ec0, version 1
Iris Audio Processor: version A3 revision 0
  PCI Adapter ID (vendor 0x9004, device 0x8078) PCI slot 1
  PCI Adapter ID (vendor 0x9004, device 0x8078) PCI slot 2
Video: MVP unit 0 version 1.4
AV: AV1 Card version 1, Camera not connected.
Vice: TRE


/usr/gfx/gfxinfo

Code: Select all

Graphics board 0 is "CRM" graphics.
        Managed (":0.0") 1280x1024
        32 bitplanes
        board revision 2, CRM revision C, GBE revision B
         Monitor 0 type: HJW 0
        Channel 0:
         Origin = (0,0)
         Video Output: 1280 pixels, 1024 lines, 59.94Hz (1280x1024_60)

Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 3 guests