O2+ 600Mhz R7k with Synology, LTO4.

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
User avatar
khalidschofield
Posts: 542
Joined: Thu May 06, 2004 6:18 am

O2+ 600Mhz R7k with Synology, LTO4.

Unread postby khalidschofield » Sat Dec 10, 2016 5:56 am

Finally have the O2 up and running that I've always wanted. The system is in perfect cosmetic condition and I have two O2+ systems. One spare and this one. Sadly only one has the 600Mhz CPU.


Code: Select all

ILLU 1# hinv -v
CPU: QED RM7000 Processor Chip Revision: 5.1
FPU: QED RM7000 Floating Point Coprocessor Revision: 5.0
1 602 MHZ IP32 Processor
Main memory size: 1024 Mbytes
Secondary unified instruction/data cache size: 256 Kbytes on Processor 0
Ternary unified instruction/data cache size: 1 Mbyte on Processor 0
Instruction cache size: 16 Kbytes
Data cache size: 16 Kbytes
FLASH PROM version 4.18
Integral SCSI controller 0: Version ADAPTEC 7880
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  CDROM: unit 4 on SCSI controller 0
Integral SCSI controller 1: Version ADAPTEC 7880
  Tape drive: unit 6 on SCSI controller 1: unknown
On-board serial ports: tty1
On-board serial ports: tty2
On-board EPP/ECP parallel port
CRM graphics installed
Integral Ethernet: ec0, version 1
PCI Fast Ethernet: ec1, 10/100Mb, bus 0, slot 3, id 0x104c, rev 3.0
Iris Audio Processor: version A3 revision 0
  PCI Adapter ID (vendor 0x9004, device 0x8078) PCI slot 1
  PCI Adapter ID (vendor 0x9004, device 0x8078) PCI slot 2
  PCI Adapter ID (vendor 0x104c, device 0x0500) PCI slot 3
Video: MVP unit 0 version 1.4
AV: AV1 Card version 1, O2Cam type 1 version 0 connected.
Vice: TRE


Code: Select all

ILLU 4# /usr/gfx/gfxinfo
Graphics board 0 is "CRM" graphics.
        Managed (":0.0") 1280x1024
        32 + 32 bitplanes
        board revision 2, CRM revision C, GBE revision B
         Monitor 0 type: DEL 28686
        Channel 0:
         Origin = (0,0)
         Video Output: 1280 pixels, 1024 lines, 59.94Hz (1280x1024_60)
ILLU 5#


Code: Select all

ILLU 6# df -h
Filesystem             Type  Size   use  avail  %use  Mounted on
/dev/root               xfs  931G  143G   789G   16%  /
10.0.0.200:/volume1/khalid     nfs   11T  2.8T   8.0T   27%  /san
ILLU 7# mount
/dev/root on / type xfs (rw,raw=/dev/rroot)
/hw on /hw type hwgfs (rw)
/proc on /proc type proc (rw)
/dev/fd on /dev/fd type fd (rw)
10.0.0.200:/volume1/khalid on /san type nfs (vers=3,rw,proto=tcp,dev=140001)
ILLU 8#


Code: Select all

ILLU 8# mt -f /dev/tape status
        Controller: SCSI
        Device: HP: Ultrium 4-SCSI  B63D
        Status: 0x20262
        Drive type: unknown
        Media : READY, writable, at BOT
ILLU 9#


I've got my synology running dropbox and google drive. This is mounted on NFS on the O2 and it back's up everything to the LTO4 drive. IRIX runs fetchmail also to keep a local backup of my gmail account which in turn dumps to tape once in a while. It's about all the use I could think for the system sadly. Suggestions?
############################
Re-install with OpenBSD :)

User avatar
vishnu
Donor
Donor
Posts: 3139
Joined: Sun Mar 18, 2007 3:25 pm
Location: Minneapolis, Minnesota USA

Re: O2+ 600Mhz R7k with Synology, LTO4.

Unread postby vishnu » Tue Dec 13, 2016 5:00 pm

That is a rare bird indeed, did you do the 600MHz upgrade yourself? Be nice to see what it could do with Maya or Pro/E... :mrgreen:
Project:
Temporarily lost at sea...
Plan:
World domination! Or something...

:Tezro: :Octane2:

User avatar
khalidschofield
Posts: 542
Joined: Thu May 06, 2004 6:18 am

Re: O2+ 600Mhz R7k with Synology, LTO4.

Unread postby khalidschofield » Wed Dec 14, 2016 4:53 am

No i bought the system as 600Mhz but I have all the bits plus prom programmer and tonnes of cpu's in my office. If someone wants to have a go at doing the upgrade I'm gain.
############################

Re-install with OpenBSD :)

User avatar
Titox
Posts: 264
Joined: Tue Aug 14, 2007 12:13 am
Location: Spain

Re: O2+ 600Mhz R7k with Synology, LTO4.

Unread postby Titox » Thu Dec 15, 2016 12:34 pm

Code: Select all

ILLU 6# df -h
Filesystem             Type  Size   use  avail  %use  Mounted on
/dev/root               xfs  931G  143G   789G   16%  /


Wuau!!! 1TB SCSI?
Alberto (Between the TV and the sofa)
:Fuel: :Octane2: :1600SW: :O2: :O2: :1600SW: :Indigo:
http://www.f3b.es
http://unixverse.blogspot.com

User avatar
vishnu
Donor
Donor
Posts: 3139
Joined: Sun Mar 18, 2007 3:25 pm
Location: Minneapolis, Minnesota USA

Re: O2+ 600Mhz R7k with Synology, LTO4.

Unread postby vishnu » Thu Dec 15, 2016 2:07 pm

Titox wrote:

Code: Select all

ILLU 6# df -h
Filesystem             Type  Size   use  avail  %use  Mounted on
/dev/root               xfs  931G  143G   789G   16%  /


Wuau!!! 1TB SCSI?

What?! I didn't know they made such things! Who's the manufacturer?
Project:
Temporarily lost at sea...
Plan:
World domination! Or something...

:Tezro: :Octane2:

User avatar
jan-jaap
Donor
Donor
Posts: 4867
Joined: Thu Jun 17, 2004 11:35 am
Location: Wijchen, The Netherlands
Contact:

Re: O2+ 600Mhz R7k with Synology, LTO4.

Unread postby jan-jaap » Thu Dec 15, 2016 3:04 pm

vishnu wrote:
Titox wrote:

Code: Select all

ILLU 6# df -h
Filesystem             Type  Size   use  avail  %use  Mounted on
/dev/root               xfs  931G  143G   789G   16%  /


Wuau!!! 1TB SCSI?

What?! I didn't know they made such things! Who's the manufacturer?

AFAIK they didn't. SATA-SCSI adapter and a SATA SSD or laptop disk?
:PI: :Indigo: :Indigo: :Indy: :Indy: :Indy: :Indigo2: :Indigo2: :Indigo2IMP: :Octane: :Octane2: :O2: :O2+: Image :Fuel: :Tezro: :4D70G: :Skywriter: :PWRSeries: :Crimson: :ChallengeL: :Onyx: :O200: :Onyx2: :O3x02L:
To accentuate the special identity of the IRIS 4D/70, Silicon Graphics' designers selected a new color palette. The machine's coating blends dark grey, raspberry and beige colors into a pleasing harmony. (IRIS 4D/70 Superworkstation Technical Report)

User avatar
khalidschofield
Posts: 542
Joined: Thu May 06, 2004 6:18 am

Re: O2+ 600Mhz R7k with Synology, LTO4.

Unread postby khalidschofield » Fri Dec 16, 2016 12:12 am

Yup an acard sata/ scsi with a Samsung 1tb sad on it. I switched off xfsfsr in crontab to slow the death of thme ssd. Wonder if I should do anything else?
############################

Re-install with OpenBSD :)


Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 2 guests