Fuel V12 R16k 700Mhz 1.5GB

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
User avatar
Kotomo
Posts: 33
Joined: Fri Oct 07, 2016 11:14 am
Location: Maryland, USA.

Fuel V12 R16k 700Mhz 1.5GB

Unread postby Kotomo » Mon Nov 07, 2016 3:03 pm

The Fuel in my collection that I recently setup at my main work desk. I have dreams and aspirations to learn 3D modeling and animation. My *cough* Windows gamer desktop is more than capable. Just an SGI workstation to play around with the past intrigues me.

It's named Taokaka, because I gotta name one of my machines after a Catgirl.

hinv -vm output:

Code: Select all

Location: /hw/module/001c01/node
            IP34 Board: barcode MSZ166     part 030-1707-003 rev -H
Location: /hw/module/001c01/node/cpubus/0
        IP34PIMM Board: barcode MSY421     part 030-1891-001 rev -D
Location: /hw/module/001c01/Ibrick/xtalk/13
          ASTODY Board: barcode MSK322     part 030-1726-003 rev -E
Location: /hw/module/001c01/Ibrick/xtalk/14
            IP34 Board: barcode MSZ166     part 030-1707-003 rev -H
Location: /hw/module/001c01/Ibrick/xtalk/15
            IP34 Board: barcode MSZ166     part 030-1707-003 rev -H
1 700 MHZ IP35 Processor
CPU: MIPS R16000 Processor Chip Revision: 2.1
FPU: MIPS R16010 Floating Point Chip Revision: 2.1
CPU 0 at Module 001c01/Slot 0/Slice A: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xa
Main memory size: 1536 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 001c01/Slot 0: 1536 MB (enabled)
  Bank 0 contains 512 MB (Standard) DIMMS (enabled)
  Bank 1 contains 512 MB (Standard) DIMMS (enabled)
  Bank 2 contains 256 MB (Standard) DIMMS (enabled)
  Bank 3 contains 256 MB (Standard) DIMMS (enabled)
Integral SCSI controller 0: Version QL12160, low voltage differential
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL12160, single ended
  CDROM: unit 6 on SCSI controller 1
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V12
Integral Fast Ethernet: ef0, version 1, module 001c01, pci 4
  PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1
  PCI Adapter ID (vendor 0x1102, device 0x0002) PCI slot 2
  PCI Adapter ID (vendor 0x1102, device 0x7002) PCI slot 2
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 4
  PCI Adapter ID (vendor 0x11c1, device 0x5802) PCI slot 5
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c01/Slot n0: Revision 6.210
USB controller: type OHCI


/usr/gfx/gfxinfo putput:

Code: Select all

Graphics board 0 is "ODYSSEY" graphics.
   Managed (":0.0") 1920x1200
   BUZZ version B.1
   PB&J version 1
   128MB memory
      Banks: 4, CAS latency: 3
   Compositor port 1 attached to channel 0 nic 0x1004a768
    Monitor 0 type: DEL 16437
   Channel 0:
    Origin = (0,0)
    Video Output: 1920 pixels, 1200 lines, 60.00Hz (1920x1200_60p)


Image
:Octane: :Octane: :Octane: :Octane: :Octane2: :Octane2: :Fuel: :O2: :O2: :O2: :O2000: :O2000:

User avatar
uunix
Donor
Donor
Posts: 1777
Joined: Sun Mar 27, 2011 12:48 pm
Location: Stourbridge / England / UK

Re: Fuel V12 R16k 700Mhz 1.5GB

Unread postby uunix » Mon Nov 07, 2016 3:46 pm

Beautiful man.. just beautiful..
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:Octane2: :O2: :Indigo: :Indy:
-----------------------------------------------------------------------

User avatar
Kotomo
Posts: 33
Joined: Fri Oct 07, 2016 11:14 am
Location: Maryland, USA.

Re: Fuel V12 R16k 700Mhz 1.5GB

Unread postby Kotomo » Mon Nov 07, 2016 7:53 pm

Thanks!

Don't mind my scuff marks.
:Octane: :Octane: :Octane: :Octane: :Octane2: :Octane2: :Fuel: :O2: :O2: :O2: :O2000: :O2000:

User avatar
Trippynet
Donor
Donor
Posts: 756
Joined: Thu Aug 15, 2013 6:22 am
Location: Aberdeen, Scotland, UK

Re: Fuel V12 R16k 700Mhz 1.5GB

Unread postby Trippynet » Tue Nov 08, 2016 1:23 am

Nice little system! When it runs properly, the Fuel is a good system. It's just that they can be a bit flimsy and finicky at times...
Systems in use:
:Indigo2IMP: - Nitrogen: R10000 195MHz CPU, 384MB RAM, SolidIMPACT Graphics, 36GB 15k HDD & 300GB 10k HDD, 100Mb/s NIC, New/quiet fans, IRIX 6.5.22
:Fuel: - Lithium: R14000 600MHz CPU, 4GB RAM, V10 Graphics, 72GB 15k HDD & 300GB 10k HDD, 1Gb/s NIC, New/quiet fans, IRIX 6.5.30
Other system in storage: :O2: R5000 200MHz, 224MB RAM, 72GB 15k HDD, PSU fan mod, IRIX 6.5.30

User avatar
s0ke
Donor
Donor
Posts: 192
Joined: Mon Feb 24, 2003 8:27 am
Location: TX

Re: Fuel V12 R16k 700Mhz 1.5GB

Unread postby s0ke » Tue Nov 08, 2016 6:26 am

Very finicky
:Fuel: REFUSE
R16K 700: 2GB: V10: Noctua Fans

User avatar
ClassicHasClass
Donor
Donor
Posts: 2049
Joined: Wed Jul 25, 2012 7:12 pm
Location: Sunny So Cal
Contact:

Re: Fuel V12 R16k 700Mhz 1.5GB

Unread postby ClassicHasClass » Tue Nov 08, 2016 7:57 am

Sexy red!

A little gentle buffing on the front and some wax pencils might be able to reduce those marks.
smit happens.

:Fuel: bigred, 900MHz R16K, 4GB RAM, V12 DCD, 6.5.30
:Indy: indy, 150MHz R4400SC, 256MB RAM, XL24, 6.5.10
:Indigo2IMP: purplehaze, 175MHz R10000, Solid IMPACT
probably posted from Image bruce, Quad 2.5GHz PowerPC 970MP, 16GB RAM, Mac OS X 10.4.11
plus IBM POWER6 p520 * Apple Network Server 500 * RDI PrecisionBook * BeBox * Solbourne S3000 * Commodore 128 * many more...

User avatar
Kotomo
Posts: 33
Joined: Fri Oct 07, 2016 11:14 am
Location: Maryland, USA.

Re: Fuel V12 R16k 700Mhz 1.5GB

Unread postby Kotomo » Wed Nov 09, 2016 11:57 am

ClassicHasClass wrote:Sexy red!

A little gentle buffing on the front and some wax pencils might be able to reduce those marks.


Thanks for the tip.

I have a feeling this machine did not see a whole lot of use in it's day. It was very clean inside when I got it. Knock on wood.
:Octane: :Octane: :Octane: :Octane: :Octane2: :Octane2: :Fuel: :O2: :O2: :O2: :O2000: :O2000:


Return to “SGI: hinv”

Who is online

Users browsing this forum: Google [Bot] and 3 guests