octane2, r14k 2 600Mhz, 8Gb, EMXI

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
rs422
Posts: 15
Joined: Mon Nov 02, 2009 4:53 am
Location: seoul, korea

octane2, r14k 2 600Mhz, 8Gb, EMXI

Unread postby rs422 » Fri Sep 02, 2016 8:27 am

i guess this is max gear for digital video manipulation.

Code: Select all

octane 1# hinv -vm
Location: /hw/node
      PM20600MHZ Board: barcode MXF574    part 030-1778-001 rev  C
Location: /hw/node/xtalk/15
            IP30 Board: barcode MYC406    part 030-1467-001 rev  K
Location: /hw/node/xtalk/15/pci/2
            FP1 Board: barcode MKL174    part 030-0891-003 rev  J
    PWR.SPPLY.ER Board: barcode AAE3180008 part 060-0035-003 rev  A
Location: /hw/node/xtalk/13
        XTALKPCI Board: barcode FLX999    part 030-0952-005 rev  B
Location: /hw/node/xtalk/12
          MOT20 Board: barcode GPV497    part 030-1240-003 rev  B
Location: /hw/node/xtalk/11
      GALILEO15 Board: barcode FTA958    part 030-0931-003 rev  C
Location: /hw/node/xtalk/9
  FIBRE_CHANNEL Board: barcode KFV156    part 030-0927-003 rev  E
2 600 MHZ IP30 Processors
Heart ASIC: Revision F
CPU: MIPS R14000 Processor Chip Revision: 2.4
FPU: MIPS R14010 Floating Point Chip Revision: 0.0
Main memory size: 8192 Mbytes
Xbow ASIC: Revision 1.4
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
  Tape drive: unit 3 on SCSI controller 0: DAT
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
Integral SCSI controller 2: Version Fibre Channel AIC-1160, revision 2
Integral SCSI controller 3: Version Fibre Channel AIC-1160, revision 2
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: EMXI
Integral Fast Ethernet: ef0, version 1, pci 2
Gigabit Ethernet: eg0, PCI slot 3, firmware version 12.4.10
Iris Audio Processor: version RAD revision 12.0, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3
  PCI Adapter ID (vendor 0x10a9, device 0x0009) PCI slot 3
  PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 0
  PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 1
Digital Video: unit 1, revision 4.2, TMI: revision 2, CSC: revision 1


Code: Select all

octane 4# /usr/gfx/gfxinfo -vv
Graphics board 0 is "IMPACTSR" graphics.
        Managed (":0.0") 1280x1024
        Product ID 0x3, 2 GEs, 2 REs, 4 TRAMs
        MGRAS revision 4, RA revision 0
        HQ rev B, GE12 rev A, RE4 rev C, PP1 rev E,
        VC3 rev A, CMAP rev E, Heart rev F
        unknown, assuming 19" monitor (id 0xf)
        Video board present

        Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False
        Channel 0:
        Origin = (0,0)
        Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60)
        Video Format Flags:  (none)
        Sync Disabled
        Using Gamma Map 0
        Monitor Type:  unknown
        Gain (all color components) - 1.000000 (nominal)
:Indigo2:

User avatar
Krokodil
Donor
Donor
Posts: 477
Joined: Fri Apr 17, 2015 2:32 pm
Location: The House of Particular Individuals

Re: octane2, r14k 2 600Mhz, 8Gb, EMXI

Unread postby Krokodil » Fri Sep 02, 2016 2:44 pm

The only thing you're missing is the vPro. But EMXI is still pretty good and I understand some video editing applications require it.

Welcome to the Octane2 owners club.
:Octane2: - :O2: - :Octane: - :Indigo2IMP:

User avatar
foetz
Moderator
Moderator
Posts: 6543
Joined: Mon Apr 14, 2003 4:34 am
Contact:

Re: octane2, r14k 2 600Mhz, 8Gb, EMXI

Unread postby foetz » Fri Sep 02, 2016 7:06 pm

an interesting combination with the mxe. this one should be some serious fun :-)


Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 2 guests