Upgraded Onyx2: 4 x 300MHz R12000, 8GB RAM, InfiniteReality3

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
User avatar
iamcamiel
Posts: 45
Joined: Tue Aug 02, 2016 12:32 am
Location: The Netherlands
Contact:

Upgraded Onyx2: 4 x 300MHz R12000, 8GB RAM, InfiniteReality3

Unread postby iamcamiel » Thu Sep 01, 2016 11:25 am

I've upgraded the Onyx2 a bit; all CPU's are now 300MHz R12000's, after I managed to repair the failing CPU module, RAM's been doubled to 8GB, and the RM7's have been replaced with a single RM10:

hinv -vm

Code: Select all

Location: /hw/module/1/slot/n2/node
     IP31PIMM8MB Board: barcode JHC930     part 030-1401-002 rev  B
            IP31 Board: barcode JGY603     part 030-1255-003 rev  D
Location: /hw/module/1/slot/n1/node
        MODULEID Board: barcode K0013182   part              rev   
      4P1G5_MPLN Board: barcode GCH427     part 013-1839-001 rev  F
     IP31PIMM8MB Board: barcode JHC870     part 030-1401-002 rev  B
            IP31 Board: barcode JHD721     part 030-1255-003 rev  D
Location: /hw/module/1/slot/io4/kona
          GE16-4 Board: barcode JKA567     part 030-1398-001 rev  E
Location: /hw/module/1/slot/io5/quad_atm
        QUAD-ATM Board: barcode ECE868     part 030-0948-003 rev  C
Location: /hw/module/1/slot/io1/baseio
          BASEIO Board: barcode DYZ765     part 030-0734-002 rev  M
             MIO Board: barcode EYZ160     part 030-0880-003 rev  E
4 300 MHZ IP27 Processors
CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 2.3
CPU 0 at Module 1/Slot 2/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
CPU 1 at Module 1/Slot 2/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
CPU 2 at Module 1/Slot 1/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
CPU 3 at Module 1/Slot 1/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz  Tap 0xa
Main memory size: 7680 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 8 Mbytes
Memory at Module 1/Slot 82: 4096 MB (enabled)
  Bank 0 contains 512 MB (Standard) DIMMS (enabled)
  Bank 1 contains 512 MB (Standard) DIMMS (enabled)
  Bank 2 contains 512 MB (Standard) DIMMS (enabled)
  Bank 3 contains 512 MB (Standard) DIMMS (enabled)
  Bank 4 contains 512 MB (Standard) DIMMS (enabled)
  Bank 5 contains 512 MB (Standard) DIMMS (enabled)
  Bank 6 contains 512 MB (Standard) DIMMS (enabled)
  Bank 7 contains 512 MB (Standard) DIMMS (enabled)
Memory at Module 1/Slot 81: 3584 MB (enabled)
  Bank 0 contains 512 MB (Standard) DIMMS (enabled)
  Bank 1 contains 512 MB (Standard) DIMMS (enabled)
  Bank 2 contains 512 MB (Standard) DIMMS (enabled)
  Bank 3 contains 512 MB (Standard) DIMMS (enabled)
  Bank 4 contains 512 MB (Standard) DIMMS (enabled)
  Bank 5 contains 512 MB (Standard) DIMMS (enabled)
  Bank 6 contains 512 MB (Standard) DIMMS (enabled)
  Bank 7 contains 512 MB (Standard) DIMMS (disabled)
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
  Disk drive: unit 3 on SCSI controller 0 (unit 3)
  CDROM: unit 6 on SCSI controller 0
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3 parallel port: plp1
Graphics board: InfiniteReality3
ATM XIO 4 port OC-3c: module 1, slot io5, unit 0 (ports: 0-3)
Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2
Iris Audio Processor: version RAD revision 7.0, number 1
Origin BASEIO board, module 1 slot 1: Revision 3
  PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 0
  PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 6
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 7
IOC3/IOC4 external interrupts: 1
HUB in Module 1/Slot 2: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 1/Slot 1: Revision 5 Speed 100.00 Mhz (enabled)
IP27prom in Module 1/Slot n2: Revision 6.156
IP27prom in Module 1/Slot n1: Revision 6.156
IO6prom on Global Master Baseio in Module 1/Slot io2: Revision 6.156


/usr/gfx/gfxinfo -v

Code: Select all

Graphics board 0 is "KONAL" graphics.
        Managed (":0.0") 1280x1024
        Display has 2 channels
        4 GEs (of 4), occmask = 0x0f
        4MB external BEF ram, 32bit path
        1 RM10 board (of 1) 1/0/0/0
        Texture Memory: 256MB/-/-/-
        Medium pixel depth
        32K cmap
        brd: 80f61806 3041606/-/-/- f9391002
         ge: 0 14832057 24731057 14231057
        rm0: 15032057 15431057
              4631057 2/2/2/2
              4d31057 2/2/2/2/2/2/2/2
              4938057 5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5
         dg: 05532057
              5838057 1/1/1/1
              5631057 1/1
        GE:   NIC #:      0000.003b.68a3 (family: 0b)
              Serial #:   JKA567
              Part #:     030-1398-001
        KT:   No NIC serial number available.
        RM0:  NIC #:      0000.0058.dde0 (family: 0b)
              Serial #:   MJT762
              Part #:     030-1402-002
        TM0:  NIC #:      0000.0058.dd85 (family: 0b)
              Serial #:   KJD773
              Part #:     030-1588-002
        RM1:  No NIC serial number available.
        TM1:  No NIC serial number available.
        RM2:  No NIC serial number available.
        TM2:  No NIC serial number available.
        RM3:  No NIC serial number available.
        TM3:  No NIC serial number available.
        BP:   No NIC serial number available.
        DG:   NIC #:      0000.0018.4b53 (family: 0b)
              Serial #:   GFV091
              Part #:     030-1055-001
        DGOPT:No NIC serial number available.
:Onyx2: :PI: :Fuel: :Indigo: :Indigo: :Indigo2IMP: :Indy: + various DEC, IBM, Sun, HP, ...

User avatar
foetz
Moderator
Moderator
Posts: 6544
Joined: Mon Apr 14, 2003 4:34 am
Contact:

Re: Upgraded Onyx2: 4 x 300MHz R12000, 8GB RAM, InfiniteReality3

Unread postby foetz » Thu Sep 01, 2016 12:40 pm

veeery nice one :D


Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 1 guest