Origin 200 2xR10000 180MHz 256MB

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
User avatar
uunix
Donor
Donor
Posts: 1793
Joined: Sun Mar 27, 2011 12:48 pm
Location: Stourbridge / England / UK

Origin 200 2xR10000 180MHz 256MB

Unread postby uunix » Thu Jun 09, 2016 7:23 am

Completely uninteresting, but this is the smashed up machine from the RTC

Code: Select all

TWIST1 6# hinv -vm
Location: /hw/module/1/slot/MotherBoard/node
    PIMM_2XT5_2M Board: barcode GFB452     part 013-2284-002 rev  A
Location: /hw/module/1/slot/MotherBoard/node/xtalk/8
            IP29 Board: barcode FXJ330     part 030-1244-001 rev  H
Location: /hw/module/1/slot/MotherBoard/node/xtalk/8/pci/2
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
CPU: MIPS R10000 Processor Chip Revision: 2.6
2 180 MHZ IP27 Processors
CPU 0 at Module 1/Slot 1/Slice A: 180 Mhz MIPS R10000 Processor Chip (enabled)
  Processor revision: 2.6. Secondary cache size: 2 MB
CPU 1 at Module 1/Slot 1/Slice B: 180 Mhz MIPS R10000 Processor Chip (enabled)
  Processor revision: 2.6. Secondary cache size: 2 MB
Main memory size: 256 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Memory at Module 1/Slot 1: 256 MB (enabled)
  Bank 0 contains 128 MB (Standard) DIMMS (enabled)
  Bank 1 contains 64 MB (Standard) DIMMS (enabled)
  Bank 2 contains 64 MB (Standard) DIMMS (enabled)
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
  CDROM: unit 3 on SCSI controller 1
IOC3 serial port: tty1
IOC3 serial port: tty2
IOC3 parallel port: plp1
Integral Fast Ethernet: ef0, version 1
Origin BASEIO board, module 1 slot 1
IOC3 external interrupts: 1
HUB in Module 1/Slot 1: Revision 3 (enabled)
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:Octane2: :O2: :Indigo: :Indy:
-----------------------------------------------------------------------

mopar5150
Posts: 548
Joined: Tue Apr 24, 2012 6:02 pm
Location: Palm Springs, CA
Contact:

Re: Origin 200 2xR10000 180MHz 256MB

Unread postby mopar5150 » Thu Jun 09, 2016 12:12 pm

I am amazed it functions at all after the smash up.
If the thing isn't on fire it's a software problem.

:Tezro: :O3x0: :A350:

User avatar
uunix
Donor
Donor
Posts: 1793
Joined: Sun Mar 27, 2011 12:48 pm
Location: Stourbridge / England / UK

Re: Origin 200 2xR10000 180MHz 256MB

Unread postby uunix » Thu Jun 09, 2016 12:58 pm

Well indeed yes, so am I. More amazed why it needs the MVS cable attached to fire up... BUT it gets better..
MobaXtermScreenshot2.png

MobaXtermScreenshot.png

No idea what it is yet, but it all works (well apart from the projects being on a drive that doesn't exist anymore) and LITHO isn't licenced but there is a licence swapper app which may have something to do with it.

Hamie says it's rather good software.
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:Octane2: :O2: :Indigo: :Indy:
-----------------------------------------------------------------------

User avatar
Krokodil
Donor
Donor
Posts: 477
Joined: Fri Apr 17, 2015 2:32 pm
Location: The House of Particular Individuals

Re: Origin 200 2xR10000 180MHz 256MB

Unread postby Krokodil » Thu Jun 09, 2016 5:09 pm

Let us be thankful and give thanks that the damage seems only to be cosmetic.

Sweet Origin200.
:Octane2: - :O2: - :Octane: - :Indigo2IMP:


Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 2 guests