Octane | 250mhz | 512MB | SSI

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
Posts: 159
Joined: Fri May 09, 2003 11:51 pm
Location: Arizona

Octane | 250mhz | 512MB | SSI

Unread postby DaJuice » Mon Nov 09, 2015 8:59 pm

Pretty modest Octane. :]
Purchased years ago from reputable.com and recently revived: http://forums.nekochan.net/viewtopic.php?f=10&p=7385005



Code: Select all

Location: /hw/node
      PM10250MHZ Board: barcode GRX181     part 030-1284-002 rev  B
Location: /hw/node/xtalk/15
            IP30 Board: barcode GPZ799     part 030-0887-003 rev  M
Location: /hw/node/xtalk/15/pci/2
             FP1 Board: barcode 55723C     part 030-0891-003 rev  E
    PWR.SPPLY.S2 Board: barcode AAC8081096 part 060-0038-001 rev  D
Location: /hw/node/xtalk/12
            GM20 Board: barcode GSE838     part 030-0957-003 rev  S
1 250 MHZ IP30 Processor
Heart ASIC: Revision E
CPU: MIPS R10000 Processor Chip Revision: 3.4
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
Main memory size: 512 Mbytes
Xbow ASIC: Revision 1.3
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 1 Mbyte
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: SSI
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3


Code: Select all

Graphics board 0 is "IMPACTSR" graphics.
        Managed (":0.0") 1280x1024
        Product ID 0x3, 2 GEs, 2 REs, 0 TRAMs
        MGRAS revision 2, RA revision 0
        HQ rev B, GE11 rev B, RE4 rev C, PP1 rev H,
        VC3 rev A, CMAP rev E, Heart rev E
        unknown, assuming 19" monitor (id 0xf)
        Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False
        Channel 0:
         Origin = (0,0)
         Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60)
         Video Format Flags:  (none)
         Sync Disabled
         Using Gamma Map 0
         Monitor Type:  unknown
         Gain (all color components) - 1.000000 (nominal)

Posts: 333
Joined: Tue Jul 10, 2012 3:48 am

Re: Octane | 250mhz | 512MB | SSI

Unread postby chicaneuk » Tue Nov 10, 2015 4:49 am

Looks pristine :) Very nice.
:Indigo: :Indigo2: :Indigo2IMP: :Indy: :Octane2: :O200:

User avatar
Posts: 861
Joined: Thu Aug 15, 2013 6:22 am
Location: Aberdeen, Scotland, UK

Re: Octane | 250mhz | 512MB | SSI

Unread postby Trippynet » Tue Nov 10, 2015 7:15 am

An Octane that nice looking deserves another post. Kudos on a fine looking machine!
Systems in use:
:Indigo2IMP: - Nitrogen: R10000 195MHz CPU, 384MB RAM, SolidIMPACT Graphics, 36GB 15k HDD & 300GB 10k HDD, 100Mb/s NIC, New/quiet fans, IRIX 6.5.22
:Fuel: - Lithium: R14000 600MHz CPU, 4GB RAM, V10 Graphics, 72GB 15k HDD & 300GB 10k HDD, 1Gb/s NIC, New/quiet fans, IRIX 6.5.30
Other system in storage: :O2: R5000 200MHz, 224MB RAM, 72GB 15k HDD, PSU fan mod, IRIX 6.5.30

Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 1 guest