Octane R12000 300MHz 640MB SSI (Nothing flash)

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
User avatar
uunix
Donor
Donor
Posts: 1796
Joined: Sun Mar 27, 2011 12:48 pm
Location: Stourbridge / England / UK

Octane R12000 300MHz 640MB SSI (Nothing flash)

Unread postby uunix » Wed Mar 18, 2015 5:40 pm

Code: Select all

Location: /hw/node
      PM10300MHZ Board: barcode KFZ121     part 030-1355-001 rev  M
Location: /hw/node/xtalk/15
            IP30 Board: barcode GYY448     part 030-0887-004 rev  B
Location: /hw/node/xtalk/15/pci/2
             FP1 Board: barcode 42452C     part 030-0891-003 rev  E
    PWR.SPPLY.ER Board: barcode AAE9160539 part 060-0035-002 rev  A
Location: /hw/node/xtalk/12
            GM20 Board: barcode ESC890     part 030-0957-003 rev  H
1 300 MHZ IP30 Processor
Heart ASIC: Revision E
CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 640 Mbytes
Xbow ASIC: Revision 1.3
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive / removable media: unit 2 on SCSI controller 0: 720K/1.44M floppy
  Tape drive: unit 3 on SCSI controller 0: DAT
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: SSI
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3


Machine I bought a few weeks back, it was the R10000, fitted new R12000 300MHz[edited.. originally stated 3000MHz]. Clean install IRIX (just finished a net install after a few hiccups), popped in a tape and a floppy (but will probably remove the floppy after I've installed all the old stuff from floppies into my SoftWindows). It came with 3 Drives, 1x9GB currently installed & 2 34GB (One of which my son destroyed by knocking it off the table). I've got some video cards in the loft I'll be testing etc. All in all a nice clean box, a shame the front door panel broke in transit. Oh and it has a Cherokee PSU.

It does feel quite nippy.
Last edited by uunix on Wed Mar 18, 2015 5:55 pm, edited 1 time in total.
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:Octane2: :O2: :Indigo: :Indy:
-----------------------------------------------------------------------

User avatar
foetz
Moderator
Moderator
Posts: 6544
Joined: Mon Apr 14, 2003 4:34 am
Contact:

Re: Octane R12000 300MHz 640MB SSI (Nothing flash)

Unread postby foetz » Wed Mar 18, 2015 5:52 pm

uunix wrote:fitted new R12000 3000MHz.

:shock:

my son destroyed by knocking it off the table

:shock:

User avatar
uunix
Donor
Donor
Posts: 1796
Joined: Sun Mar 27, 2011 12:48 pm
Location: Stourbridge / England / UK

Re: Octane R12000 300MHz 640MB SSI (Nothing flash)

Unread postby uunix » Wed Mar 18, 2015 5:54 pm

foetz wrote:
uunix wrote:fitted new R12000 3000MHz.

:shock:

my son destroyed by knocking it off the table

:shock:

3000Mhz.. :lol:
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:Octane2: :O2: :Indigo: :Indy:
-----------------------------------------------------------------------

User avatar
vishnu
Donor
Donor
Posts: 3176
Joined: Sun Mar 18, 2007 3:25 pm
Location: Minneapolis, Minnesota USA

Re: Octane R12000 300MHz 640MB SSI (Nothing flash)

Unread postby vishnu » Wed Mar 18, 2015 6:35 pm

I had a hella time installing IRIX on my new Tezro, until I realized that the advertised-as-brand-new SCSI disk that I bought off ebay was toast. Things went much better after I put in a functioning disk... :mrgreen:
Project:
Temporarily lost at sea...
Plan:
World domination! Or something...

:Tezro: :Octane2:

User avatar
uunix
Donor
Donor
Posts: 1796
Joined: Sun Mar 27, 2011 12:48 pm
Location: Stourbridge / England / UK

Re: Octane R12000 300MHz 640MB SSI (Nothing flash)

Unread postby uunix » Thu Mar 19, 2015 3:06 am

vishnu wrote:I had a hella time installing IRIX on my new Tezro, until I realized that the advertised-as-brand-new SCSI disk that I bought off ebay was toast. Things went much better after I put in a functioning disk... :mrgreen:

A working disk help immensely.

I did find that, with my son knocking the disk of the table, it did not behave like toast/bread does and landed on it's corner. It's funny, but as soon as I put it on the table, a thought went through my mind that someone would knock it off.. and they did!
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:Octane2: :O2: :Indigo: :Indy:
-----------------------------------------------------------------------

User avatar
uunix
Donor
Donor
Posts: 1796
Joined: Sun Mar 27, 2011 12:48 pm
Location: Stourbridge / England / UK

Re: Octane R12000 300MHz 640MB SSI (Nothing flash)

Unread postby uunix » Thu Mar 19, 2015 2:46 pm

New hinv after a bit of messing tonight

Code: Select all

Location: /hw/node
      PM10300MHZ Board: barcode KFZ121     part 030-1355-001 rev  M
Location: /hw/node/xtalk/15
            IP30 Board: barcode GYY448     part 030-0887-004 rev  B
Location: /hw/node/xtalk/15/pci/2
             FP1 Board: barcode 42452C     part 030-0891-003 rev  E
    PWR.SPPLY.ER Board: barcode AAE9160539 part 060-0035-002 rev  A
Location: /hw/node/xtalk/12
            GM20 Board: barcode ESC890     part 030-0957-003 rev  H
1 300 MHZ IP30 Processor
Heart ASIC: Revision E
CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 1024 Mbytes
Xbow ASIC: Revision 1.3
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive / removable media: unit 2 on SCSI controller 0: 720K/1.44M floppy
  Tape drive: unit 3 on SCSI controller 0: DAT
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: MXI
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3


What I don't get, unless I'm being silly, 8 Slots of 256Mb should equate to 2GB? Which what I have installed.
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:Octane2: :O2: :Indigo: :Indy:
-----------------------------------------------------------------------

chicaneuk
Posts: 333
Joined: Tue Jul 10, 2012 3:48 am

Re: Octane R12000 300MHz 640MB SSI (Nothing flash)

Unread postby chicaneuk » Thu Mar 19, 2015 3:01 pm

Nice :) Is it early type green skins as per the Octane's you had to scrap?
:Indigo: :Indigo2: :Indigo2IMP: :Indy: :Octane2: :O200:

User avatar
uunix
Donor
Donor
Posts: 1796
Joined: Sun Mar 27, 2011 12:48 pm
Location: Stourbridge / England / UK

Re: Octane R12000 300MHz 640MB SSI (Nothing flash)

Unread postby uunix » Thu Mar 19, 2015 3:06 pm

Yes, but very very clean. (apart from the slightly broken front door - not visible from front).
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:Octane2: :O2: :Indigo: :Indy:
-----------------------------------------------------------------------

ajw99uk
Posts: 256
Joined: Tue Apr 19, 2011 4:59 am
Location: Yorkshire, UK

Re: Octane R12000 300MHz 640MB SSI (Nothing flash)

Unread postby ajw99uk » Thu Mar 19, 2015 4:44 pm

uunix wrote:What I don't get, unless I'm being silly, 8 Slots of 256Mb should equate to 2GB? Which what I have installed.


Eight 256MB DIMMs or four 256MB kits? The labelling on DIMMs sold as part of two-DIMM kits often (usually?) shows the kit size. Once bought what I thought would be four 32MB SIMMs for the I2 which turned out to be 32MB in total because the seller had been caught out by that label "convention" (immediate refund, so sure it was an innocent mistake).
Fuel; Indigo2; Inspiron 531 WinXP/Win10/debian-buster; Inspiron 4100 debian-buster; RiscPC Kinetic/448MB/RISCOS4.39; RPi B/256MB RISCOS5.23; RPi2 Raspbian-buster; A5000/33MHz/FPA11/8MB/RISCOS3.11; A540/25MHz/FPA10/16MB/RISCOS3.11 or RISCiX1.21

User avatar
uunix
Donor
Donor
Posts: 1796
Joined: Sun Mar 27, 2011 12:48 pm
Location: Stourbridge / England / UK

Re: Octane R12000 300MHz 640MB SSI (Nothing flash)

Unread postby uunix » Thu Mar 19, 2015 4:51 pm

ajw99uk wrote:
uunix wrote:What I don't get, unless I'm being silly, 8 Slots of 256Mb should equate to 2GB? Which what I have installed.


Eight 256MB DIMMs or four 256MB kits? The labelling on DIMMs sold as part of two-DIMM kits often (usually?) shows the kit size. Once bought what I thought would be four 32MB SIMMs for the I2 which turned out to be 32MB in total because the seller had been caught out by that label "convention" (immediate refund, so sure it was an innocent mistake).

good point, label says 256 on each stick from Kingston, so maybe you're right. Oh well.. better than original 600 odd MB
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:Octane2: :O2: :Indigo: :Indy:
-----------------------------------------------------------------------

ajw99uk
Posts: 256
Joined: Tue Apr 19, 2011 4:59 am
Location: Yorkshire, UK

Re: Octane R12000 300MHz 640MB SSI (Nothing flash)

Unread postby ajw99uk » Fri Mar 20, 2015 5:57 am

uunix wrote:What I don't get, unless I'm being silly, 8 Slots of 256Mb should equate to 2GB? Which what I have installed.

ajw99uk wrote:Eight 256MB DIMMs or four 256MB kits?

uunix wrote:good point, label says 256 on each stick from Kingston, so maybe you're right. Oh well.. better than original 600 odd MB

KSG-OCT/256 is definitely a kit part number - is that what you've got? - but 60% more RAM is better than 60% less!
Time to update the thread heading?
Fuel; Indigo2; Inspiron 531 WinXP/Win10/debian-buster; Inspiron 4100 debian-buster; RiscPC Kinetic/448MB/RISCOS4.39; RPi B/256MB RISCOS5.23; RPi2 Raspbian-buster; A5000/33MHz/FPA11/8MB/RISCOS3.11; A540/25MHz/FPA10/16MB/RISCOS3.11 or RISCiX1.21

User avatar
uunix
Donor
Donor
Posts: 1796
Joined: Sun Mar 27, 2011 12:48 pm
Location: Stourbridge / England / UK

Re: Octane R12000 300MHz 640MB SSI (Nothing flash)

Unread postby uunix » Fri Mar 20, 2015 6:19 am

I hope no one has missed the SSI - MXI also
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:Octane2: :O2: :Indigo: :Indy:
-----------------------------------------------------------------------

User avatar
uunix
Donor
Donor
Posts: 1796
Joined: Sun Mar 27, 2011 12:48 pm
Location: Stourbridge / England / UK

Re: Octane R12000 300MHz 640MB SSI (Nothing flash)

Unread postby uunix » Fri Mar 20, 2015 1:16 pm

Yup, Kit of 2

Code: Select all

KSG oct/256
2078 001.A00
kit of 2 CE
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:Octane2: :O2: :Indigo: :Indy:
-----------------------------------------------------------------------


Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 2 guests