Octane R10K 250MHz 1152MB EMXI+SI+MCO 2x 9GB

A place to post hardware inventories.
Forum rules
Please post your 'hinv' in the following format:

Topic: Kind of machine (O2, Octane, Tezro, Onyx2, etc.), CPU (R10k 250MHz, R12k 300MHz, R16k 1GHz, etc.), RAM, graphics option (Example: Tezro V12 4xR16K 700MHz 4GB)

Body: output of hinv -v (hinv -vm if possible) and /usr/gfx/gfxinfo.

Please wrap the output in BBCode "code" blocks to improve legibility.
ajw99uk
Posts: 261
Joined: Tue Apr 19, 2011 4:59 am
Location: Yorkshire, UK

Octane R10K 250MHz 1152MB EMXI+SI+MCO 2x 9GB

Unread postby ajw99uk » Tue Mar 10, 2015 6:18 pm

This is the Octane that uunix spotted on Ebay but could not collect, so I picked it up. Since then he seems to have found others to distract him ... so here's the hinv. I had been pessimistic as the model number suggested only a 175MHz machine, but it turned out to have been used within SGI until around 2006 and had been upgraded.

UPDATE 23 November 2016: I have passed this machine on to jebmayers, who will get far better use from it than I did (it has sat under a desk for most of the nearlt two years since I acquired it).

Code: Select all

Location: /hw/node
Part:030-1286-002;Name:PM20250MHZ;Serial:GTJ939;Revision:B;Group:ff;Capability:ffffffff;Variety:ff;Laser:000000246615;
Location: /hw/node/xtalk/15
Part:030-1467-001;Name:IP30;Serial:MEW365;Revision:D;Group:ff;Capability:ffffffff;Variety:ff;Laser:00000059d294;
Location: /hw/node/xtalk/15/pci/2
Part:060-0038-001;Name:PWR.SPPLY.S2;Serial:AAC8150074;Revision:C;Group:ff;Capability:ffffffff;Variety:ff;Laser:00000021fe8d;
Part:030-0891-003;Name:FP1;Serial:98829B;Revision:F;Group:ff;Capability:ffffffff;Variety:ff;Laser:0000001a23bd;
Location: /hw/node/xtalk/12
Part:030-1240-003;Name:MOT20;Serial:KXX073;Revision:H;Group:ff;Capability:ffffffff;Variety:ff;Laser:00000049c163;
Part:030-1196-002;Name:MCO;Serial:GBG509;Revision:C;Group:ff;Capability:ffffffff;Variety:ff;Laser:0000001a301f;
Location: /hw/node/xtalk/9
Part:030-0938-003;Name:GM10;Serial:ENJ563;Revision:T;Group:ff;Capability:ffffffff;Variety:ff;Laser:000000183180;
1 250 MHZ IP30 Processor
Heart ASIC: Revision F
CPU: MIPS R10000 Processor Chip Revision: 3.4
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
Main memory size: 1152 Mbytes
Xbow ASIC: Revision 1.4
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 1 Mbyte
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: EMXI
Graphics board: SI
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3
OCTANE Channel Option Board


Code: Select all

Graphics board 0 is "IMPACTSR" graphics.
   Managed (":0.0") 1280x1024
   Product ID 0x3, 2 GEs, 2 REs, 4 TRAMs
   MGRAS revision 4, RA revision 0
   HQ rev B, GE12 rev A, RE4 rev C, PP1 rev H,
   VC3 rev A, CMAP rev F, Heart rev F
   unknown, assuming 19" monitor (id 0xf)
   OCO board present (rev 2)

   Channel 0:
    Origin = (0,0)
    Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60)
Graphics board 1 is "IMPACTSR" graphics.
   Managed (":0.1") 1280x1024
   Product ID 0x2, 1 GE, 1 RE, 0 TRAMs
   MGRAS revision 1, RA revision 0
   HQ rev B, GE11 rev B, RE4 rev C, PP1 rev A,
   VC3 rev A, CMAP rev E, Heart rev F
   unknown, assuming 19" monitor (id 0xf)

   Channel 0:
    Origin = (0,0)
    Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60)

Bit of a mixture - Xbow 1.4 and a newer m/b but Lucent PSU. The SCSI drives are two IBM 9GB units, now one a clone of the other with 128MB swap (the fx default) and the rest as a root partition. I think there should be TRAM showing for the SE board, it's there but maybe u/s - like the second processor, which PROM hinv reports but is disabled in IRIX. I have tried removing the PM to reseat it, but one stand-off seems stuck; the bolt can be loosened but the PM won't lift at that point (halfway along the side nearest the edge of the m/b). Dual-screen is nice; the "assumed 19" monitors" are a 17" CRT and a 22" LCD-TV! Pretty sure it had a CADduo card in a PCI cage at SGI but xinerama is doing the trick with a single keybd+mouse input. It does seem to "stall" at intervals, so perhaps some SGI-office-network config that needs to be cleaned out? Most services chkconfig'd off. Skins in good condition, as is one drive sled (the seller broke the other while pulling it out to show me the drive :( ).
Last edited by ajw99uk on Wed Nov 23, 2016 3:05 pm, edited 1 time in total.
Fuel; Indigo2; Inspiron 531 WinXP/Win10/debian-buster; Inspiron 4100 debian-buster; RiscPC Kinetic/448MB/RISCOS4.39; RPi B/256MB RISCOS5.23; RPi2 Raspbian-buster; A5000/33MHz/FPA11/8MB/RISCOS3.11; A540/25MHz/FPA10/16MB/RISCOS3.11 or RISCiX1.21

User avatar
foetz
Moderator
Moderator
Posts: 6593
Joined: Mon Apr 14, 2003 4:34 am
Contact:

Re: Octane R10K 250MHz 1152MB EMXI+SI+MCO 2x 9GB

Unread postby foetz » Tue Mar 10, 2015 6:55 pm

how do you know it was an sgi internal machine?

User avatar
ClassicHasClass
Donor
Donor
Posts: 2109
Joined: Wed Jul 25, 2012 7:12 pm
Location: Sunny So Cal
Contact:

Re: Octane R10K 250MHz 1152MB EMXI+SI+MCO 2x 9GB

Unread postby ClassicHasClass » Tue Mar 10, 2015 11:21 pm

The glamour shots of Jim Clark on the desktop.

(Eww.)
smit happens.

:Fuel: bigred, 900MHz R16K, 4GB RAM, V12 DCD, 6.5.30
:Indy: indy, 150MHz R4400SC, 256MB RAM, XL24, 6.5.10
:Indigo2IMP: purplehaze, 175MHz R10000, Solid IMPACT
probably posted from Image bruce, Quad 2.5GHz PowerPC 970MP, 16GB RAM, Mac OS X 10.4.11
plus IBM POWER6 p520 * Apple Network Server 500 * RDI PrecisionBook * BeBox * Solbourne S3000 * Commodore 128 * many more...

ajw99uk
Posts: 261
Joined: Tue Apr 19, 2011 4:59 am
Location: Yorkshire, UK

Re: Octane R10K 250MHz 1152MB EMXI+SI+MCO 2x 9GB

Unread postby ajw99uk » Wed Mar 11, 2015 1:24 pm

foetz wrote:how do you know it was an sgi internal machine?

The seller told me he'd got the machine from a friend who had worked at SGI Reading, corroborated by some desktop-[host] config files left over from when it was on the SGI network. I suppose they could be spoofs, but why bother? No signs of any IRIX source code.
Fuel; Indigo2; Inspiron 531 WinXP/Win10/debian-buster; Inspiron 4100 debian-buster; RiscPC Kinetic/448MB/RISCOS4.39; RPi B/256MB RISCOS5.23; RPi2 Raspbian-buster; A5000/33MHz/FPA11/8MB/RISCOS3.11; A540/25MHz/FPA10/16MB/RISCOS3.11 or RISCiX1.21

User avatar
uunix
Donor
Donor
Posts: 1808
Joined: Sun Mar 27, 2011 12:48 pm
Location: Stourbridge / England / UK

Re: Octane R10K 250MHz 1152MB EMXI+SI+MCO 2x 9GB

Unread postby uunix » Wed Mar 11, 2015 1:40 pm

And all for 1 Pence... brilliant.
-----------------------------------------------------------------------
Hey Ho! Pip & Dandy!
:Octane2: :O2: :Indigo: :Indy:
-----------------------------------------------------------------------

User avatar
foetz
Moderator
Moderator
Posts: 6593
Joined: Mon Apr 14, 2003 4:34 am
Contact:

Re: Octane R10K 250MHz 1152MB EMXI+SI+MCO 2x 9GB

Unread postby foetz » Wed Mar 11, 2015 1:52 pm

ClassicHasClass wrote:The glamour shots of Jim Clark on the desktop.

:lol:

ajw99uk wrote:The seller told me he'd got the machine from a friend who had worked at SGI Reading, corroborated by some desktop-[host] config files left over from when it was on the SGI network. I suppose they could be spoofs, but why bother? No signs of any IRIX source code.

still a nice extra :-)

User avatar
ClassicHasClass
Donor
Donor
Posts: 2109
Joined: Wed Jul 25, 2012 7:12 pm
Location: Sunny So Cal
Contact:

Re: Octane R10K 250MHz 1152MB EMXI+SI+MCO 2x 9GB

Unread postby ClassicHasClass » Wed Mar 11, 2015 6:22 pm

GREEN FOETZ
FEAR!!!!!
smit happens.

:Fuel: bigred, 900MHz R16K, 4GB RAM, V12 DCD, 6.5.30
:Indy: indy, 150MHz R4400SC, 256MB RAM, XL24, 6.5.10
:Indigo2IMP: purplehaze, 175MHz R10000, Solid IMPACT
probably posted from Image bruce, Quad 2.5GHz PowerPC 970MP, 16GB RAM, Mac OS X 10.4.11
plus IBM POWER6 p520 * Apple Network Server 500 * RDI PrecisionBook * BeBox * Solbourne S3000 * Commodore 128 * many more...

User avatar
foetz
Moderator
Moderator
Posts: 6593
Joined: Mon Apr 14, 2003 4:34 am
Contact:

Re: Octane R10K 250MHz 1152MB EMXI+SI+MCO 2x 9GB

Unread postby foetz » Wed Mar 11, 2015 7:06 pm

ClassicHasClass wrote:GREEN FOETZ
FEAR!!!!!

:twisted:

Jack Luminous
Donor
Donor
Posts: 200
Joined: Mon Sep 26, 2011 12:59 am
Location: PARIS

Re: Octane R10K 250MHz 1152MB EMXI+SI+MCO 2x 9GB

Unread postby Jack Luminous » Thu Mar 12, 2015 1:43 am

ClassicHasClass wrote:GREEN FOETZ
FEAR!!!!!


LOL
:Octane2: :Octane: :Octane: :O2:

User avatar
Trippynet
Donor
Donor
Posts: 813
Joined: Thu Aug 15, 2013 6:22 am
Location: Aberdeen, Scotland, UK

Re: Octane R10K 250MHz 1152MB EMXI+SI+MCO 2x 9GB

Unread postby Trippynet » Thu Mar 12, 2015 2:56 am

ClassicHasClass wrote:GREEN FOETZ
FEAR!!!!!


And on 5555 posts as well...
Systems in use:
:Indigo2IMP: - Nitrogen: R10000 195MHz CPU, 384MB RAM, SolidIMPACT Graphics, 36GB 15k HDD & 300GB 10k HDD, 100Mb/s NIC, New/quiet fans, IRIX 6.5.22
:Fuel: - Lithium: R14000 600MHz CPU, 4GB RAM, V10 Graphics, 72GB 15k HDD & 300GB 10k HDD, 1Gb/s NIC, New/quiet fans, IRIX 6.5.30
Other system in storage: :O2: R5000 200MHz, 224MB RAM, 72GB 15k HDD, PSU fan mod, IRIX 6.5.30


Return to “SGI: hinv”

Who is online

Users browsing this forum: No registered users and 1 guest